imilab C22 Manual de usuario
C22
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –11
Čeština
12 –20
Slovenčina
21 –29
Magyar
30 –38
Deutsch
39 –47
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Status indicator
Microphone
Reset hole
Front view
Rear view
Lens
microSD slot
(can be revealed by
pushing the lens
upward)
Loudspeaker
MicroUSB charging port
4
Installation
The IMILAB C22 can be placed on flat surfaces, such as desks, dining tables, and coffee
tables. It can also be mounted on a wall.
Mounting the Camera on a Wall
First use a pencil to mark the positions for the base mounting holes on the wall, then
drill two holes at the marked positions. The diameter of each hole is approximately 6
mm, and the depth is approximately 30 mm.
Next, insert the plastic wall plugs into the drilled holes. After that, place the side of the
base with arrows facing forward, and then align the holes. Insert the screws and then
tighten them into the wall plugs with a Phillips head screwdriver.
Finally, align the grooves on the bottom of the camera with the raised part on the base,
and then turn it clockwise until it locks into place.
Precaution for mounting the camera on a wall: The wall must be able to support at least
three times the total weight of the camera.
Warning: To prevent possible injury, the camera must be securely fixed to the ceiling or
wall according to the installation instructions.
5
How to Use
Installing a MicroSD card
Make sure the camera is unplugged. Adjust the lens upward until the microSD slot is
revealed, then insert the microSD card into the slot (the side with contact points must be
facing down).
Note: Unplug the camera when installing or removing the microSD card. Please use a
microSD card from a qualified brand (the camera supports a microSD card with a
maximum capacity of 64 GB and the FAT32 format only, and a microSD card with a
capacity of 64 GB and above may need to be formatted to the FAT32 format before use
via “Settings > Manage Storage” on the camera’s plug-in page in the Xiaomi Home app).
It is recommended that the microSD card has a read/write speed of no less than
U1/Class 10.
Turning the Device On
IMILAB C22 will automatically activate once the power cable is inserted into the Micro-
USB charging port.
If the indicator light is flashing orange, that means the device is activated successfully. If
else, please reset the device. Once the IMILAB C22 is turned on, please do not attempt to
rotate its head by force. If the camera position is incorrect, adjustments can be made
through the app.
6
Indicator Light
The indicator light indicates what’s happening inside the device.
•Steady blue on: Connected to the network, device status is normal.
•Flashing blue: Network error.
•Flashing orange rapidly: Waiting for connection.
•Flashing orange slowly: System upgrade in progress.
Xiaomi Home Connection
This product works with the Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app is installed
already. Or search for "Mi Home/Xiaomi Home" in the app store to
download and install it. Open the Mi Home/Xiaomi Home app, tap
"+" on the upper right, and then follow the instructions to add
your device.
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions
based on the current app version. Make sure the camera turns on and the network
connection is stable during connecting. The indicator is blinking orange rapidly when
waiting for a connection and turns into blue once the camera is successfully connected.
Restoring Factory Settings
In case of changing the network that the camera is connected to or the Xiaomi Account
in the Mi Home/Xiaomi Home app that the camera is paired with, press and hold the
reset button for about three seconds until the indicator blinks orange rapidly, so that
the camera is restored to factory settings, and then reconnect the camera with the app.
Note: Restoring factory settings will not delete the content on the microSD card.
Real-Time Surveillance
In the camera's plugin of the Mi Home/Xiaomi Home app, you can view the real-time
monitoring screen, adjust the sharpness of the image, change the horizontal and vertical
angle of the camera, capture and record the screen, and make remote calls.
7
Infrared Night Vision
The camera can automatically switch to night vision mode at night according to the
change in ambient light. With built-in infrared night vision lights, the camera can clearly
capture images/videos in the dark.
Playback
The playback feature of the camera is only available when a compatible microSD card is
installed, or a cloud storage service is purchased for the IMILAB C22.
Automatic Surveillance
When the home surveillance assistant is enabled, the camera will record videos if it
detects human movement and changes in real-time within its monitored area. Then you
will receive notifications on the app.
You can enable or disable the function of home surveillance assistant in the camera's
plugin in the Mi Home/Xiaomi Home app. You can set surveillance of all-day, daytime,
nighttime, or any other time meeting your demands. Alert sensitivity and alert time
intervals can also be customized in the app.
8
Video Sharing
In the camera's plugin in the Mi Home/Xiaomi Home app, you can select the device
sharing option in the settings menu to share the camera with others. The person the
camera is shared with needs to download the Mi Home/Xiaomi Home app and sign in
with a Xiaomi account.
Specifications
Name
IMILAB C22
Model
CMSXJ60A
Net weight
239g
Resolution
2880×1620
Wireless connectivity
Wi-Fi IEEE 802.11 b/g/n/ax 2.4GHz
Expandable memory
MicroSD card (up to 64 GB)
Operating frequency range
2400-2483.5 MHz
Max output power
18 dBm
Input
5V⎓2A
Dimensions
108×76×76mm
Operating temperature
-10°C ~ 40°C
9
Precautions
•The operating temperature range for this camera is between -10°C and 40°C. Do
not use the camera in environments with temperatures above or below the
specified range.
•The camera is a precision electronic product. In order to ensure its normal
operation, do not install the camera in environments with high humidity levels
nor allow water to get into it.
•To improve the camera's performance, do not place its lens facing or next to a
reflective surface, such as glass windows or white walls, as this will cause the
image to appear overly bright in areas close to the camera and darker in areas
further away, or cause the camera to produce white images.
•Make sure the camera is installed in an area with a strong Wi-Fi signal. Do not
place the camera near the objects that may affect its Wi-Fi signal, such as metal
objects, microwave ovens.
•Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation, and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g., during transport,
cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
Otros manuales para C22
1
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de imilab
imilab
imilab EC3 Manual de usuario
imilab
imilab C20 Manual de usuario
imilab
imilab Home Security Camera Basic Manual de usuario
imilab
imilab C21 Manual de usuario
imilab
imilab EC3 Manual de usuario
imilab
imilab EC3 Pro Manual de usuario
imilab
imilab C22 Manual de usuario
imilab
imilab A1 Manual de usuario
imilab
imilab C20 Manual de usuario
imilab
imilab EC2 Manual de usuario
