CMV-50 Operations Manual Copyright illunis, LLC 9/20/2019 Page 3
Precautions
CMV-50
CMV-50 Precautions
Do not drop, damage, disassemble, immerse, repair or alter the
camera.
Applying incorrect power may damage the camera electronics.
The warranty is void if the camera is opened or modified in any
way.
Care must be taken in handling as not to create static dis-
charge that may permanently damage the device.
Camera Link is a DC based interface. The camera and capture
device must share the same electrical ground. Failure to do so
will damage the Camera Link interface chips and/or camera
and capture card.
The maximum Camera Link data rate is 85Mhz. This limits the
maximum pixel clock speed to 42.5Mhz, which is provided as
an overclock mode. Operation is guaranteed at 30Mhz pixel
clock and below.
PoCL cables are compatible with the CMV-50
camera. PoCL camera power is not supported.
Absolute Maximum Ratings
Input Voltage: 6 to 16V DC
Storage Temperature: -40C to +70C
Recommended Maximum Ratings
Input Voltage: 9 to 14V DC
Operating Temperature: 0C to +60C
Most illunis cameras operate beyond these temperature limits,
please call for details.
Recommended Operating Conditions
Input Voltage: 9-12V DC
Operating Temperature: 0C to 60
Relative humidity should not exceed 80% non-condensing.
Specifications subject to change without notice.
