Icron 422 Manual de usuario

USB Ranger 422

User Guide

Featuring ExtremeUSB® Technology

USB Ranger 422

Thank you for purchasing the USB Ranger. Please read this guide

thoroughly before installation.

This document applies to Part Numbers: 00-00037, 00-00038, 00-00039 and

00-00050.

FCC Radio Frequency Interference Statement Warning

The USB Ranger has been tested and found compliant with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when installed and operated in a commercial environment. The USB Ranger

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with this user guide, may cause harmful interference

to radio communications. Operation of the USB Ranger in a residential area

is likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

CE Statement

We, Icron Technologies Corporation, declare under our sole responsibility

that the USB Ranger, to which this declaration relates, is in conformity with

European Standard EN 55022/A1 Class A, and EN 50082-1 (IEC 801-2,

IEC 801-3, IEC 801-4)

IC Statement

This Class A digital apparatus complies with Canadian ICES-003.

Technologies Corporation, the Icron Technologies Corporation logo, and the

Icron Technologies Corporation products referred to herein are either the

trademarks or the registered trademarks of Icron Technologies Corporation.

All other trademarks are property of their respective owners. Icron

Technologies Corporation assumes no responsibility for errors that may

appear in this manual. Information contained herein is subject to change

without notice.

User Guide

Contents

Introduction................................................................................................ 1

USB Ranger Product Contents................................................................... 1

About the USB Ranger .............................................................................. 2

Before You Begin ...................................................................................... 5

Installing the LEX unit............................................................................... 5

Installing the REX unit .............................................................................. 5

Connecting the LEX unit to the REX unit ................................................. 5

Checking the Installation............................................................................ 6

Connecting a USB Device ......................................................................... 6

Troubleshooting ......................................................................................... 7

Specifications............................................................................................. 9

Limited Hardware Warranty .................................................................... 10

Hardware Remedies ................................................................................. 10

Limitation of Liability.............................................................................. 10

Obtaining Warranty Service..................................................................... 11

Contacting Technical Support.................................................................. 11

USB Ranger 422

Notes

User Guide

Introduction

This manual is intended to assist IT professionals install the USB Ranger

422. The instructions in this guide assume a general knowledge of computer

installation procedures, familiarity with cabling requirements, and some

understanding of USB devices.

NOTE:Notes give additional information that could make installation

easier.

USB Ranger Product Contents

When you open your USB Ranger for the first time you should find the

following items:

• USB Ranger User Guide

• LEX unit

• REX unit

• AC power adapter (2 units)

• USB cable (2m long)

To complete the installation, you will also require the following items that

are not included with the product:

• USB compatible computer

• USB device

• 2-strand fiber-optic cable with MT-RJ connectors (if using surface

cabling),

OR,

2-strand fiber-optic cabling with two information outlets and two

2-strand fiber-optic patch cords with MT-RJ connectors (if using

premise cabling)

NOTE:The maximum length of the fiber-optic cable, including patch

cords, must not exceed 500m.

USB Ranger 422

About the USB Ranger

The USB Ranger incorporates Icron’s ExtremeUSB® technology. This

technology breaks the five-meter distance barrier for the connection of USB

peripheral devices and allows users to enjoy the benefits of USB technology

beyond the desktop. With the USB Ranger 422, USB devices can be located

up to 500 meters from the host computer.

The USB Ranger is composed of two individual units, the LEX unit and the

REX unit.

The LEX unit

The LEX unit connects to the host computer using a conventional

USB cable. It is powered by an external AC adapter.

Front View Rear View

1Power LED

2Power connector

3Host LED

4Host Port (USB Type B)

5Link LED

6Link Port (MT-RJ)

User Guide

The REX unit

The REX unit connects to a USB device using a conventional USB

cable. The REX unit allows you to connect up to four USB devices. It

is powered by an external AC adapter.

Front View Rear View

1Power LED

2Power connector

3Device LEDs

4Device Ports (USB Type A)

5Link LED

6Link Port (MT-RJ)

Network Cabling

The LEX unit and the REX unit are interconnected by up to 500

meters of fiber-optic cabling. Two strands of 62.5/125 multimode or

50/125 multimode fiber-optic cabling are required. The cabling

subsystem must provide a duplex connection with crossover, and

must be terminated with MT-RJ connectors at both ends.

Fiber-optic cable

USB USB

LEX REX

cable cable(s) USB

device(s)

computer

AC power adapters

USB Ranger 422

USB Cables

USB cables have two distinct connectors. The Type A connector is used to

connect the cable from a USB device to the Type A port on a computer or

hub. The Type B connector is used to attach the USB cable to a USB device.

USB Type A

port USB Type A

connector

USB Type B

port

USB Type B

connector

Compatibility

The USB Ranger complies with USB 1.1 specifications governing the design

of full speed USB devices. However, Icron Technologies Corporation does

not guarantee that all full speed USB devices are compatible with the USB

Ranger.

User Guide

Before You Begin

Before you can install the USB Ranger, you need to prepare your site.

1. Determine where the host computer is to be located and set up the

computer.

2. Determine where you want to locate the USB device(s).

3. If you are using surface cabling, ensure you have enough fiber-optic

cabling to connect the two locations.

If you are using premise cabling, ensure fiber-optic cabling is

installed between the two locations, with fiber-optic information

outlets located near both the computer and the USB device.

Installing the LEX unit

1. Place the LEX unit near the host computer.

2. Plug the power adapter into a suitable AC outlet.

3. Connect the power adapter to the LEX unit.

4. Plug the Type B connector on the USB cable (included) into the

Host port on the LEX unit.

5. Plug the Type A connector on the USB cable into a USB port on the

host computer.

Installing the REX unit

1. Place the REX unit near the USB device(s).

2. Plug the power adapter into a suitable AC outlet.

3. Connect the power adapter to the REX unit.

Connecting the LEX unit to the REX unit

With Surface Cabling

1. Plug one end of the fiber-optic cabling (not included) into the Link

port on the LEX unit.

2. Plug the other end of the fiber-optic cabling into the Link port on the

REX unit.

USB Ranger 422

With Premise Cabling

1. Plug one end of a fiber-optic patch cord (not included) into the Link

port on the LEX unit.

2. Plug the other end of the patch cord into the fiber-optic information

outlet near the host computer.

3. Plug one end of the second fiber-optic patch cord (not included) into

the Link port on the REX unit.

4. Plug the other end of the second patch cord into the fiber-optic

information outlet near the USB device.

NOTE:The maximum length of the fiber-optic cable, including patch

cords, must not exceed 500 meters.

NOTE: The cabling must provide a duplex connection with crossover, and

must be terminated with MT-RJ connectors at both ends.

Checking the Installation

1. Check that the Power LEDs on the LEX unit and the REX unit are

both on.

2. Check that the Link LEDs on the LEX unit and the REX unit are

both on.

3. Check that the Host LED on the LEX unit is on.

4. On the host PC, open the Device Manager applet. Expand the entry

for Universal Serial Bus controllers by clicking the + sign. If the

USB Ranger has been installed correctly you should find it listed as

a Generic USB Hub.

Connecting a USB Device

1. Install any software required to operate the USB device(s). Refer to

the documentation for the device(s), as required.

2. Connect the USB device to the Device port on the REX unit.

3. Check that the Device LED on the REX unit is on.

Tabla de contenidos

Otros manuales de Extensor de Icron

Icron

Icron USB Rover 1300 Manual de usuario

Icron

Icron EL5100 Manual de usuario

Icron

Icron USB 2.0 Ranger 2304 Manual de usuario

Icron

Icron RG2301 Manual de usuario

Icron

Icron USB 2.0 Ranger 2312 Manual de usuario

Icron

Icron USB Ranger 2201 Manual de usuario

Icron

Icron USB 3.0 SP3022 Manual de usuario

Icron

Icron USB 3-2-1 Starling 3251C Manual de usuario

Icron

Icron USB 2.0 RG2304SP Manual de usuario

Icron

Icron USB 2.0 Ranger 2304-LAN Manual de usuario

Icron

Icron USB-2000 Manual de usuario

Icron

Icron USB Ranger 2224 Manual de usuario

Icron

Icron USB 2.0 Ranger 442 Manual de usuario

Icron

Icron USB 2.0 Ranger 2311 Manual de usuario

Icron

Icron USB 2.0 RG2304GE-LAN Manual de usuario

Icron

Icron EL5363 Manual de usuario

Icron

Icron Ranger 2101 Manual de usuario

Icron

Icron USB 2.0 Ranger 2204 Manual de usuario

Icron

Icron VU5200 Manual de usuario

Icron

Icron USB Rover 2850 Manual de usuario

Icron

Icron USB 2.0 Ranger 2104 Manual de usuario

Icron

Icron USB Ranger 2204 Manual de usuario

Icron

Icron Spectra 3001-15 Manual de usuario

Icron

Icron USB 2.0 RG2304 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario