ICP DAS USA M-7053 Manual de usuario

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

M-7053

16 Channel Digital Input Data Acquisition

Module

Quick Start Guide

Product Website:

http://www.icpdas-usa.com/m_7053.html

http://www.icpdas-usa.com/dcon_utility_pro.html

1. Introduction

The M-7053 offers 16 fully independent channels and 2 common ground channels for

digital input. The differential inputs feature channel-to-isolation. Communicable over

Modbus RTU, RS-485 and DCON protocol. It comes with free EZ Data Logger software

for PC based data logging and monitoring systems. Supports operating temperatures

between -25°C ~ +75°C (-13°F ~ +167°F). The ICP DAS M-7000 family of network data

acquisition and control modules support Modbus RTU. They can be remotely controlled

using a set of commands called DCON protocol. With the Modbus RTU protocol, it can

easily communicate with most popular SCADA/HMI software and PLCs.

2. Terminal Assignment

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3. Block/ Wiring Diagram

4. Default Settings

Default settings for the M-7053 module is:

。Protocol: Modbus RTU

。Module Address: 01

。DIO Type: Type 40

。Baud Rate: 9600 bps

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. Configuration

To install the module, follow the steps below:

1. Connect the thermistor analog input.

2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If

the host is only equipped with an RS-232 interface, then an RS-232 to RS-485

converter will be required.

3. Connect the module to the power supply using the +Vs and GND terminals. Note that

the voltage supplied should be in the range of +10 to +30V DC.

4. Open DCON utility pro

click on COM port(first icon).

It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to

search module. The default settings for the module can be found in Section 3. Click OK

after selecting the COM port setting.

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. DCON utility pro will search for the selected COM port according the setting

previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS

and the others modules.

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

6. Configuration I/O module setting on PC

7. For M-7000 modules using the Modbus RTU protocol, configure the module using the

following functions.

Sub-function 04h of Function 46h, see user manual Section 3.3.2

Sub-function 06h of Function 46h, see user manual Section 3.3.4

Sub-function 08h of Function 46h, see user manual Section 3.3.6

For M-7000 modules using the Modbus RTU protocol, use Function 04h to read the

data from the input channels. See user manual Section 3.2 for details.

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

8. If user doesn’t know command, user can select Address and ID, it will show some

refer commands as below. User can select necessary command to test or debug

modules.

M-7053 16 Channel DI DAQ Module - QuickStart (Feb/2017)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

Tabla de contenidos

Otros manuales de Sistema de E/S de ICP DAS USA

ICP DAS USA

ICP DAS USA tM-R5 Manual de usuario

ICP DAS USA

ICP DAS USA M-7018Z Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

ICP DAS USA

ICP DAS USA PCI-82x Series Manual de usuario

ICP DAS USA

ICP DAS USA I-7060 Manual de usuario

ICP DAS USA

ICP DAS USA UA-2241M Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2053 Manual de usuario

ICP DAS USA

ICP DAS USA I-9018W Manual de usuario

ICP DAS USA

ICP DAS USA CAN-2024C Manual de usuario

ICP DAS USA

ICP DAS USA I-7050D Manual de usuario

ICP DAS USA

ICP DAS USA EC2-C32 Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2050 Manual de usuario

ICP DAS USA

ICP DAS USA I-7018Z Series Manual de usuario

ICP DAS USA

ICP DAS USA I-7061D Manual de usuario

ICP DAS USA

ICP DAS USA PISO-P64 Series Manual de usuario

ICP DAS USA

ICP DAS USA HRT-711 Manual de usuario

ICP DAS USA

ICP DAS USA SG-3081 Manual de usuario

ICP DAS USA

ICP DAS USA I-7017(F)C Manual de usuario

ICP DAS USA

ICP DAS USA PCI-D64HU Manual de usuario

ICP DAS USA

ICP DAS USA I-7050 Manual de usuario

ICP DAS USA

ICP DAS USA PCI-D64HU Manual de usuario

ICP DAS USA

ICP DAS USA IR-712-MTCP Manual de usuario

ICP DAS USA

ICP DAS USA EC2-DIO Series Manual de usuario

ICP DAS USA

ICP DAS USA PISO-813 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario