ICOP Technology VDX-6326RD Manual de usuario

VDX-6326RD / VDX-6326RD-512

DM&P Vortex86DX 800MHz

3.5” CPU Module

with 4S/3USB/VGA/LCD/LVDS/AUDIO/3LAN/GPIO/

CF/FDD/PWMx16

256MB DDR2 Onboard

User’s Manual

(Revision 1.2A)

The information in this manual is subject to change without notice for continuous improvement in

the product. All rights are reserved. The manufacturer assumes no responsibility for any

inaccuracies that may be contained in this document and makes no commitment to update or to

keep current information contained in this manual.

No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,

in any form or by any means without the prior written permission of the IC P Technology Inc.

Manual No. IUM6326000-01 Ver.1.0A August, 2009

Manual No. IUM6326000-01 Ver.1.1A April, 2010

Manual No. IUM6326000-01 Ver.1.2A December, 2014

Trademarks Acknowledgment

Vortex86DX is the registered trademark of IC P Technology Inc.

ther brand names or product names appearing in this document are the properties

and registered trademarks of their respective owners. All names mentioned herewith

are served for identification purpose only.

T a b l e o f C o n t e n t s

T a b l e o f C o n t e n t s ............................................................. iii

C h a p t e r 1 Introduction……………………………………………1

1.1 Packing List ............................................................ 1

1.2 Product Description ................................................ 1

1.3 Specifications ......................................................... 3

1.4 Board Dimension .................................................... 5

C h a p t e r 2 Installation……………………………………………..6

2.1 Board utline ......................................................... 6

2.2 Connectors & Jumpers Location .................... ........7

2.3 Connectors & Jumpers Summary ........................... 9

2.4 Pin Assignments & Jumper Settings ......................11

2.5 System Mapping ................................................... 25

2.6 Watchdog Timer ................................................... 28

2.7 GPI .................................................................... 29

2.8 SPI flash ............................................................... 30

2.9 PWM .................................................................... 31

3.0 IDE to SD ............................................................. 32

C h a p t e r 3 Driver Installation……………………………………33

Appendix ………………………………………………………………..34

A. TFT Flat Panel Data utput ...................................... 34

B. TFT Flat Panel Support List ....................................... 35

C. LVDS Flat Panel Support List .................................... 37

D. Flat Panel Hardware Setting ..................................... 38

E. Flat Panel Wiring and Lighting .................................. 39

F. TCP/IP library for D S real mode .............................. 40

G. BI S Default Setting ................................................. 41

Warranty ............................................................................................ 42

This page is blank

VDX-6326RD Vortex86DX 3.5” CPU Module

C h a p t e r 1

Introduction

1.1 Packing List

Product Name Package

VDX-6326RD

VDX-6326RD-512

Embedded Vortex 6DX CPU All-in-One Board

Manual & Drivers CD x 1

RS232 cable x 3

PRINT cable x1

IDE cable x 1

FDD cable x 1

USB cable x 1

(USB port x 2

)

LAN cable x 2

GPIO cable x 1

AUDIO Line x2

YKB for Keyboard & PS/2 Mouse x 1

VDX-6326RD Vortex86DX 3.5” CPU Module

1.2 Product Description

The VDX-6326RD family of low-power x86 embedded controller is designed to meet 3.5”

specification, and integrated with the following features.

800MHz Vortex86DX System- n-Chip

VGA, TFT/LVDS LCD support up to

1280x1024 resolution

256/ 512MB DDR2 system memory

Enhanced IDE (UltraDMA-100/66/33)

3x 10/100Mbps Ethernet

3 USB 2.0 (Host)

Up to 4 serial ports

Parallel port

16-bit GPI x1

nboard 4MB SPI Flash

PC/104-Plus expansion bus ( pt.)

Meet PC/104 stacking spec.

2 watchdog timer

PWM 16~24 channels

JTAG interface

AMI BI S

Mini-PCI (TypeⅢ)

Single voltage +5V DC

Support extended operating

temperature range of -20°C to +70°C

The VDX-6326RD 3.5” family of embedded controller is designed with backward compatibility

in mind, to provide migration path for projects facing end-of-life challenges with their existing

x86 based 3.5” controller. The VDX-6326RD family of controller is designed as a plug in

replacement, with backward compatibility to support legacy software to help extend existing

product life cycle without heavy re-engineering.

VDX-6326RD is suitable for broad range of data-acquisition, Industrial automation, Process

control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,

Human machine interface, Robotics, machinery control And more…application that required

small footprint, low

power and low

cost hardware with open industry sta

ndard such as

3.5

”

VDX-6326RD Vortex86DX 3.5” CPU Module

1.3 Specifications

Features VDX-6326RD

CPU

DM&P SoC CPU Vortex86DX- 800MHz

Real Time Clock with Lithium Battery Backup

Cache

L1:16K I-Cache, 16K D-Cache L2:128KB Cache

BI S

AMI BIOS

Bus Interface

PC/104 Standard Compliant

PCI-104 (Optional)

System Memory

256/ 512MB DDR2 Onboard

Watchdog Timer

Software programmable from 30.5 us to 512 seconds x2

sets(Watchdog 1 fully compatible with M6117D)

VGA

XGI Volari Z9s Chipset

VGA and TFT Flat Panel Interface Support

LVDS Flat Panel Interface Support

Onboard 32MB VGA Memory

Support resolution up to 1280 x 1024,16MB colors

LAN

Integrated 10/100M Ethernet

Realtek 8100B 10/100Mbps Ethernet Controller

Half/Full duplex capability

Audio

CM119 USB Audio Controller

I / Interface

Enhanced IDE port (UltraDMA-100/66/33) x1

FDD port x1

RS-232 port x3

RS-232/422/485 port x1 (RS-485:Auto Direction)

Parallel port x1

USB port x3 (USB 2.0 version)

16-bit GPIO port x1

10/100Mbps Ethernet port x3

VDX-6326RD Vortex86DX 3.5” CPU Module

Connectors

2.00 mm ∅44-pin box header for IDE x1

2.00 mm ∅44-pin box header for LCD x 1

2.00 mm ∅34-pin box header for FDD x1

2.00 mm ∅26-pin box header for Printer x1

2.00 mm ∅20-pin box header for 16-bit GPIO x1

2.00 mm ∅16-pin header for LVDS x 1

2.00 mm ∅10-pin box header for RS-232 x3

2.00 mm ∅10-pin box header for USB x1

2.00 mm ∅8-pin header for Ethernet x 2

2.54 mm ∅4-pin header for DC-in x1

2.54 mm ∅3-pin header for RS-485 x1

2.54 mm ∅2-pin header for Reset x1

1.25 mm ∅6-pin wafer for JTAG x1

0.8mm ∅124-pin MiNi PCI connector x1

External 15-pin D-Sub female connector for VGA x1

External 9-pin D-Sub male connector for RS-232 x1

External RJ-45 connector for Ethernet x1

External USB connector for x1

External Mini DIN socket for Keyboard/Mouse x1

Type I/II Compact Flash slot x1

Flash Disk Support

Onboard 4MB SPI Flash Disk (Driver: A)

44-pin IDE Flash Disk( EmbedDisk 16MB or above)

Type I/II CF Card

44-pin IDE to Micro SD (Optional)

PWM

16~24 Channels

SRAM support

512KB (Optional)

Power Requirement

Single Voltage +5V

@ 880mA

Dimension

102 X 144mm (4.01 x 5.67 inches)

Weight

150g

perating

Temperature

-20

C ~ +70

-40°C ~ +85°C (Optional)

VDX-6326RD Vortex86DX 3.5” CPU Module

1.4 Board Dimension

VDX-6326RD Vortex86DX 3.5” CPU Module

C h a p t e r 2

Installation

2.1 Board Outline

(Note1: COM2 RS232/422/4 5 is selected by BIOS setting)

(Note2: J39 Default setting of JTAG Has to be Disable: Pin 1 & Pin 2 short)

(Note3: PCI-104 connector is optional)

(Note4: VI/O Default setting of PCI-104 connector is +5V)

(Note5: VDX-6326RD-512 is optional)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de ICOP Technology

ICOP Technology

ICOP Technology ICOP-602X Manual de usuario

ICOP Technology

ICOP Technology VSX-6150E-V2 Manual de usuario

ICOP Technology

ICOP Technology HMI-043T-EM41N-BF Manual de usuario

ICOP Technology

ICOP Technology VSX-6150-V2 Manual de usuario

ICOP Technology

ICOP Technology VDX-6357RD Manual de usuario

ICOP Technology

ICOP Technology VDX-6372RD Manual de usuario

ICOP Technology

ICOP Technology VEX-SOM Manual de usuario

ICOP Technology

ICOP Technology VSX-6124-FD-V2 Manual de usuario

ICOP Technology

ICOP Technology IBW-35 Manual de usuario

ICOP Technology

ICOP Technology VDX-6350E Manual de usuario

ICOP Technology

ICOP Technology VDX-6358 Manual de usuario

ICOP Technology

ICOP Technology VDX3-6724-V2 Manual de usuario

ICOP Technology

ICOP Technology VDX3-6724 Manual de usuario

ICOP Technology

ICOP Technology VDX-6354RD Manual de usuario

ICOP Technology

ICOP Technology VDX-6354D Manual de usuario

ICOP Technology

ICOP Technology Vortex86SX VSX-6101 Manual de usuario

ICOP Technology

ICOP Technology VSX-6158-V2 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario