IBM Redbooks ServeRAID-MR10M Manual de usuario

IBM P/N: 81Y1995

ServeRAID-MR10M

USER’S

GUIDE

June 2010

Fourth Edition (June 2010)

US Government Users Restricted Rights – Use, duplication or disclosure

restricted by GSA ADP Schedule Contract with IBM Corp.

ServeRAID-MR10M User’s Guide iii

Preface

This book is the primary reference and user’s guide for the ServeRAID-

MR10M SAS/SATA Controller. It contains installation instructions and

specifications for the adapter. In addition, it explains how to install and

use the intelligent Battery Backup Unit (iBBU) that is used with the

ServeRAID-MR10M controller.

For details on how to configure the storage adapter, refer to the

ServeRAID-MR Software User’s Guide. For information about the

operating system drivers, refer to the ServeRAID-MR Device Driver

Installation User’s Guide.

Audience

This document assumes that the reader is familiar with RAID controllers

and related support devices. The people who benefit from this book are:

•Engineers who are designing a system that will include the

ServeRAID-MR10M SAS/SATA Controller

•Anyone installing the ServeRAID-MR10M SAS/SATA Controller in a

RAID system

•End users who need to install the iBBU product on the ServeRAID-

MR10M SAS/SATA Controller

•Engineers and managers who are evaluating BBU products for

possible use with ServeRAID-MR controllers

Organization

This document has the following chapters and appendices:

iv Preface

•Chapter 1, Overview, provides a general overview of the

ServeRAID-MR10M SAS/SATA Controller.

•Chapter 2, ServeRAID-MR10M SAS/SATA Controller

Hardware Installation, describes the procedures for installing the

ServeRAID-MR10M SAS/SATA Controller.

•Chapter 3, ServeRAID-MR10M SAS/SATA Controller

Characteristics, provides the characteristics and technical

specifications for the ServeRAID-MR10M SAS/SATA Controller.

•Chapter 4, Introduction to the Intelligent Battery Backup Unit,

describes the iBBU model and explains how it operates.

•Chapter 5, Installing the Intelligent Battery Backup Unit, explains

how to install the iBBU model.

•Chapter 6, Using the Intelligent Battery Backup Unit, explains

how to use and monitor the iBBU model and how to replace it.

•Chapter 7, Intelligent Battery Backup Unit Specifications, has

complete technical information and specifications for the iBBU

model.

•Appendix A, Notices, contains information about the warranty,

patents, license inquiries, and trademarks.

•Appendix B, Glossary of Terms and Abbreviations, lists and

explains the terms and abbreviations used in this manual.

Related Publications

ServeRAID-MR Device Driver Installation User’s Guide

IBM Document Number: 46M1382

This document explains how to install the ServeRAID-MR10 device

driver for your operating system. The information in this document is

independent of the back-end bus and applies to the ServeRAID-MR10M

controller.

ServeRAID-MR Software User’s Guide

IBM Document Number: 46M1381

Preface v

This document explains how to use the MegaRAID Storage Manager,

WebBIOS, and Command Line Interface (CLI) utilities to configure,

monitor, and maintain the ServeRAID-MR10M controller and the

storage-related devices connected to them.

IBM Systems Safety Notices

IBM Document Number: G229-9054-01

This book contains safety notices from IBM Systems documentation. The

safety notices include danger and caution notices.

Notices and Statements in This Document

The caution and danger statements in this document are also in the

multilingual IBM Systems Safety Notices document, which is on the

ServeRAID-MR Support CD. Each statement is followed by a reference

number that you can use to locate the corresponding statement in your

language in the IBM Systems Safety Notices document. The following

notices and statements are used in this document:

Note: These notices provide important tips, guidance, or advice.

Important: These notices provide information or advice that might help

you avoid inconvenient or problem situations.

Attention: These notices indicate potential damage to programs,

devices, or data. An attention notice is placed just before

the instruction or situation in which damage might occur.

CAUTION: These statements indicate situations that can be potentially

hazardous to you. A caution statement is placed just before

the description of a potentially hazardous procedure step or

situation.

DANGER:These statements indicate situations that can be poten-

tially lethal or extremely hazardous to you. A danger

statement is placed just before the description of a

potentially lethal or extremely hazardous procedure

step or situation.

vi Preface

Revision History

IBM Customer Support

Web site:

http://www.ibm.com/systems/support/

Note: Record your controller serial number in a safe location in

case you need to contact IBM.

Safety Instructions

Use the following safety guidelines to help protect your computer system

from potential damage and to ensure your own personal safety.

Note: Use the ServeRAID-MR10M SAS/SATA Controller

with UL-listed Information Technology Equipment (ITE)

products only.

IBM Document

Number Edition/Date Remarks

81Y1995 Fourth Edition

June 2010

Updated the minimum and maximum number of drives sup-

ported by the different RAID levels.

46M1380 Third Edition

January 2009

Updated the procedures for monitoring and maintaining the

intelligent Battery Backup Unit.

43W7851 Second Edition

November 2007

Second edition of document.

43W7842 First Edition

November 2007

Initial release of document.

Preface vii

DANGER

When working on or around the system, observe the following precautions:

Electrical voltage and current from power, telephone, and communication

cables are hazardous. To avoid a shock hazard:

•Connect power to this unit only with the provided power cord. Do not use

the provided power cord for any other product.

•Do not open or service any power supply assembly.

•Do not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical storm.

•The product might be equipped with multiple power cords. To remove all

hazardous voltages, disconnect all power cords.

•Connect all power cords to a properly wired and grounded electrical

outlet. Ensure that the outlet supplies proper voltage and phase rotation

according to the system rating plate.

•Connect any equipment that will be attached to this product to properly

wired outlets.

•When possible, use one hand only to connect or disconnect signal cables.

•Never turn on any equipment when there is evidence of fire, water, or

structural damage.

•Disconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

•Connect and disconnect cables as described in the following procedures

when installing, moving, or opening covers on this product or attached

devices.

To disconnect:

1. Turn off everything (unless instructed otherwise).

2. Remove the power cords from the outlets.

3. Remove the signal cables from the connectors.

4. Remove all cables from the devices.

To connect:

1. Turn off everything (unless instructed otherwise).

2. Attach all cables to the devices.

3. Attach the signal cables to the connectors.

4. Attach the power cords to the outlets.

5. Turn on the devices.

(D005)

viii Preface

CAUTION:

The battery is a lithium ion battery. To avoid possible explosion, do not

burn. Exchange only with the IBM-approved part. Recycle or discard the

battery as instructed by local regulations. In the United States, IBM has a

process for the collection of this battery. For information, call 1-800-426-

4333. Have the IBM part number for the battery unit available when you

call. (C007)

Protecting against Electrostatic Discharge – Static electricity can

harm delicate components inside your computer. To prevent static

damage, discharge static electricity from your body before you touch any

of your computer’s electronic components, such as the microprocessor.

You can do so by touching an unpainted metal surface, such as the

metal around the card-slot openings at the back of the computer.

As you continue to work inside the computer, periodically touch an

unpainted metal surface to remove any static charge your body may

have accumulated. In addition to the preceding precautions, you can also

take the following steps to prevent damage from electrostatic discharge:

•When unpacking a static-sensitive component from its shipping

carton, do not remove the component from the antistatic packing

material until you are ready to install the component in your

computer. Just before unwrapping the antistatic packaging, be sure

to discharge static electricity from your body.

•When transporting a sensitive component, first place it in an

antistatic container or packaging.

•Handle all sensitive components in a static-safe area. If possible, use

antistatic floor pads and workbench pads.

ServeRAID-MR10M User’s Guide ix

Contents

Chapter 1

Overview

1.1 Overview 1-1

1.2 ServeRAID-MR10M SAS/SATA Controller Description 1-3

1.2.1 Controller Limitations 1-3

1.3 General Description 1-3

1.4 Configuration Scenarios 1-5

1.4.1 Number of Physical Disks Supported 1-7

1.5 Benefits of the SAS Interface 1-8

1.5.1 PCI Express Architecture 1-8

1.5.2 Operating System Support 1-9

1.6 Summary of the ServeRAID-MR10M SAS/SATA Controller

Characteristics 1-9

1.6.1 SAS Features 1-10

1.6.2 SAS Array Limitations 1-11

1.6.3 SATA II Features 1-12

1.6.4 PCI Express Performance 1-12

1.6.5 Usability Features 1-12

1.6.6 Flexibility Features 1-13

1.6.7 Drive Roaming 1-13

1.6.8 Drive Migration 1-14

1.7 Hardware Specifications 1-16

1.8 Technical Support 1-17

Chapter 2

ServeRAID-MR10M SAS/SATA Controller Hardware Installation

2.1 Requirements 2-1

2.2 Quick Installation 2-2

2.3 Detailed Installation 2-2

xContents

2.4 SAS Device Cables 2-6

2.4.1 Connecting the ServeRAID-MR10M Controller to a Drive

Enclosure 2-6

2.5 After Installing the Controller 2-7

2.6 Replacing a Failed Controller Containing Data in the iBBU 2-8

Chapter 3

ServeRAID-MR10M SAS/SATA Controller Characteristics

3.1 ServeRAID-MR10M SAS/SATA Controller 3-1

3.1.1 Board Layout and Connector Information 3-1

3.2 ServeRAID-MR10M SAS/SATA Controller Characteristics 3-3

3.3 Technical Specifications 3-3

3.3.1 Controller Specifications 3-4

3.3.2 Array Performance Features 3-5

3.3.3 Fault Tolerance 3-6

3.3.4 Power Supply Requirements for the ServeRAID-MR10M

Controller 3-6

3.3.5 Operating and Non-operating Conditions 3-7

3.3.6 Safety Characteristics 3-7

Chapter 4

Introduction to the Intelligent Battery Backup Unit

Chapter 5

Installing the Intelligent Battery Backup Unit

5.1 Installing the iBBU on the ServeRAID-MR10M Controller 5-2

Chapter 6

Using the Intelligent Battery Backup Unit

6.1 Monitoring the IBBU with the MegaRAID Configuration Utilities

6-2

6.1.1 Monitoring the iBBU with the WebBIOS Configuration

Utility 6-2

6.1.2 Monitoring the iBBU with the MegaCLI Utility 6-5

Display BBU Information 6-6

Display BBU Status Information 6-6

Display BBU Capacity 6-7

Tabla de contenidos

Otros manuales de Almacenamiento de IBM

IBM

IBM XIV STORAGE SYSTEM Manual de usuario

IBM

IBM Travelstar 3GN Manual de usuario

IBM

IBM TotalStorage DS5100 Instrucciones de funcionamiento

IBM

IBM System storage DS6000 Series Guía de instalación

IBM

IBM B01 Manual de usuario

IBM

IBM System Storage DS3524 Express Manual de usuario

IBM

IBM Deskstar 16GP Manual de usuario

IBM

IBM Travelstar VP Manual de usuario

IBM

IBM DS8882F Manual técnico

IBM

IBM FlashSystem 820 Manual de usuario

IBM

IBM N Series Manual de usuario

IBM

IBM DYLA-26480 Manual de usuario

IBM

IBM SAN192C-6 Manual

IBM

IBM FlashSystem 840 Manual de usuario

IBM

IBM SAN384B-2 Manual

IBM

IBM 3581 Manual de usuario

IBM

IBM Storwize V7000 Manual de usuario

IBM

IBM TotalStorage IP Storage 200i 110 Manual de usuario

IBM

IBM System Storage TS2240 Manual de usuario

IBM

IBM 3401-A00 Manual de usuario

IBM

IBM T400 Manual de instrucciones

IBM

IBM Modbus Plus Manual de usuario

IBM

IBM Storwize V7000 Manual de usuario

IBM

IBM Storwize V7000 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario