IBM N3240 Manual

IBM System Storage

N3240

Installation and Setup Instructions

Covering the N3240 model

GA32-2203-02



Notices

Mail comments to:

IBM Corporation

Attention Department GZW

9000 South Rita Road

Tucson, AZ 85744-0001

www.ibm.com/storage/support/nseries

References in this publication to IBM products or services do not imply that IBM intends to make them available in

every country or region.

IBM, the IBM logo, and ibm.com®are trademarks or registered trademarks of International Business Machines

Corporation in the United States, other countries, or both. A complete and current list of other IBM trademarks is

available on the web at .www.ibm.com/legal/copytrade.shtml

Data ONTAP, NetApp, and Network Appliance are trademarks and/or registered trademarks of NetApp, Inc in the

United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Before you begin ................................v

Overview of the N3240 .............................vii

Installation and setup instructions ........................1

Unpacking the N3240 series filer.............................1

Installing the rails in an IBM 19-inch rack .........................2

Installing the N3240 in the rack .............................4

Setting storage expansion unit shelf IDs ..........................5

Setting SAS expansion unit shelf IDs ..........................5

Setting EXN4000 or EXN1000 storage expansion unit shelf IDs .................6

Attaching the cable management arms...........................7

Connecting the N3240 filer to a network ..........................7

Connecting the system to expansion units .........................10

Installing the power cables ..............................10

Setting up and booting the system in Data ONTAP 7-Mode ...................11

Setting up and booting the system in Clustered Data ONTAP ..................12

Appendix. Troubleshooting and additional resources................13

Troubleshooting tips ................................13

Additional resources ................................13

Before you begin

Read this information before beginning your installation.

Before you begin your installation, print and complete a Configuration worksheet for your storage system

to gather the information that the software setup process requires. The configuration worksheet is

provided in the Data ONTAP Software Setup Guide for your version of Data ONTAP, which is available on

the IBM®N series support website:

www.ibm.com/storage/support/nseries/

If you are configuring a storage system as part of a high-availability configuration, some information

types must be unique for each storage system node in the configuration, and some information types

must be identical on both storage system nodes. If you have a high-availability configuration, IBM

recommends that you print and complete two copies of the configuration worksheet, one for each system

node.

About this document

This document provides installation and setup instructions for the IBM System Storage®N3240 filer

storage system.

For additional information about your system and related topics, refer to the following resources.

vIBM System Storage N3150, N3220, and N3240 Hardware and Service Guide

vIBM System Storage N series Introduction and Planning Guide

vIBM Environmental Notices and User Guide

vIBM System Storage N series Safety Notices

vIBM System Storage N series support website at www.ibm.com/storage/support/nseries/

Additional information about the N series storage expansion units you connect to your system can be

found in the Hardware and Service Guides and the Installation and Setup Instructions for your storage

expansion units.

Read the safety notices

Before continuing, make sure that you have reviewed the safety notices, IBM System Storage N series Safety

Notices, shipped with this product. Do not plug any cables into the system, adapters, or any electrical

outlets until you have reviewed the safety information and followed the procedures in this document.

Need help?

If you encounter any difficulties while setting up your system, contact IBM service and support for

assistance. Information can also be found on the IBM N series support website:

www.ibm.com/storage/support/nseries/

About the IBM N series support website

The IBM System Storage N series support website requires users to register in order to obtain access to N

series support content on the web. To understand how the N series support web content is organized and

navigated, and to access the N series support website, go to the following publicly accessible web page:

www.ibm.com/storage/support/nseries/

This web page also provides links to AutoSupport information as well as other important N series

product resources.

Items supplied by you for the installation

You need to supply the following items to complete the installation:

vEthernet LAN cables

vFibre Channel (FC) cables

vConsole (for example, a PC or notebook)

v#2 Phillips screwdriver and slotted screwdriver

Installing in a non-IBM rack

The rack installation instructions provided in this document apply specifically to the installation of the N

series product in an IBM 19-inch rack. IBM service personnel cannot install the N series product in a

non-IBM rack.

If the N series product is being installed in a non-IBM rack, the rails shipped with the N series product

may or may not work with the non-IBM rack. Physical installation of the N series product in a non-IBM

rack is the customer's responsibility.

Overview of the N3240

Refer to the following figures to familiarize yourself with the N3240.

1 Shelf power LED 3 Shelf activity LED

2 Shelf fault LED 4 Two-digit shelf ID digital display

1 Operation panel 3 Tab for changing the shelf ID

2 Left mounting tab 4 Right mounting tab

Note: Disk drive bays are numbered horizontally starting from 0 at the upper left position to 23 at the

lower right position.

n324001

Figure 1. Front view with bezel

Drive

Bays

0-3

4-7

8-11

12-15

16-19

20-23

1 2 34

n324002

Figure 2. Front view without bezel

1 AC fault LED 10 Serial Console port

2 Fan fault LED 11 Remote Management port (wrench icon)

3 Power LED 12 ACP port (locked wrench icon)

4 DC fault LED 13 Gigabit Ethernet ports (4)

5 Power supplies (4, each with two integrated

fans)

14 Controller modules (1 or 2 depending on the

model)

6 SAS port (2) 15 Controller module blanks (2 or 3 depending

on the model)

7 Module fault LED 16 Mezzanine card ports 10 Gb option

8 NVMEM LED 17 Mezzanine card ports 8 Gb Fibre Channel

option

9 Mezzanine card ports (8 Gb FC or 10 Gb

Ethernet)

18 Slot map label

e0b e0d

e0a e0c

SLOT

MAP PSU 1

PSU 3

PSU 2

PSU 4

SBB A

SBB B

Slot A

Slot B

e0b e0d

e0a e0c

LNK LNK

0b 0a

e0b e0d

e0a e0c

LNK !+

LNKLNK

LNK

0b 0a

n324003

56789

12 13

14 15

LNKLNK

e1a e1b

ACTACT

Figure 3. Rear view

viii

Installation and setup instructions

Use these instructions to install and set up your N3240 series filer.

Unpacking the N3240 series filer

Use these instructions to unpack the N3240 filer.

Important: If your system was shipped already assembled and cabled in a rack, go directly to “Setting

up and booting the system in Data ONTAP 7-Mode” on page 11 or “Setting up and booting the system in

Clustered Data ONTAP” on page 12 depending on your configuration.

Each N3240 system enclosure ships with an accessories kit and set-up kit containing documentation and

hardware parts for installing your system. The quantity of hardware parts is determined by your system

configuration and requirements.

Each shipment container includes the following contents:

vN3240 series system enclosure

vN3240 series system bezel

vN3240 Installation and Setup Instructions

vGeneral information kit, containing warranty, safety, and environmental information

vSoftware license

svc00168

32-55 kg (70.5-121.2 lbs)

CAUTION:

The weight of this part or unit is more than 45.4 kg (100 lb). It takes specially

trained persons, a lifting device, or both to safely lift this part or unit.

1. Remove the foam hardware protectors and the plastic surrounding the system.

2. Place the storage system on a table.

Contents for each N3240 model

The N3240 is a single-enclosure high availability (HA) capable system. Each N3240 model also ships with

at least one envelope with the software End User License Agreement (EULA) and license keys. The

following list describes the contents of the shipping packages included with the N3240 model:

v2 console adapters, RJ-45 to DB-9 (one per controller module)

v4 cable management arms (two per controller node)

v1 ESD wrist strap

v4 power cables

v2 serial null modem cables (one per controller)

v3U IBM rail kit

v1 set of IBM publications

Installing the rails in an IBM 19-inch rack

Use these instructions to install the rails on which you will mount the N3240.

Note: Read this document in its entirety before proceeding.

1. Loosen (but do not remove) the four rail adjustment screws on each rail.

2. Use Figure 5 on page 3 for reference. At the front of the rack, position the right-hand rail into the rack

at the appropriate EIA location (make sure that the two locating pins seat properly). The bottom of

the rail should line up with the bottom EIA boundary.

Right rail

Left rail

Front of rack

Rear of rack

Rail adjustment

screws

Locating pins

n620007

Figure 4. Installing the rails into the rack

Tabla de contenidos

Otros manuales de Almacenamiento de IBM

IBM

IBM DCS3700 Instrucciones de funcionamiento

IBM

IBM Travelstar 6GT Manual de usuario

IBM

IBM 4mm DDS-2 Tape Autoloader Manual de usuario

IBM

IBM TotalStorage SAN256N Director 2045-N16 Manual del producto

IBM

IBM SAN768B-2 Manual

IBM

IBM N2115 Manual de instalación

IBM

IBM DDRS-34560 Manual de usuario

IBM

IBM magstar mp 3570 Guía de configuración

IBM

IBM 7208-341 Manual

IBM

IBM TotalStorage NAS 100 Manual de usuario

IBM

IBM FC 5026 Manual de usuario

IBM

IBM B-Series Guía de configuración

IBM

IBM FlashSystem 820 Manual de usuario

IBM

IBM RDX Manual de usuario

IBM

IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Manual de usuario

IBM

IBM Power Systems Series Manual de usuario

IBM

IBM FlashSystem 810 Manual de instrucciones

IBM

IBM Ultrastar 9ZX Manual de usuario

IBM

IBM 3409-S03 Manual de usuario

IBM

IBM Deskstar 40GV Manual de instalación y funcionamiento

IBM

IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive Manual de usuario

IBM

IBM System Storage N3300 Manual

IBM

IBM DS3950 Instrucciones de funcionamiento

IBM

IBM DTLA-305040 - Deskstar 41.1 GB Hard Drive Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario