IBASE Technology MB998 Series Manual de usuario

MB998 Series

Intel®13th/12th Gen Core™i9/i7/i5/i3

Micro ATX Motherboard

with Intel® R680/W680/Q670E PCH

User’s Manual

Version 1.0

(May 2023)

MB998 User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval

system, translated into any language or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior

written consent of IBASE Technology, Inc. (hereinafter referred to as

“IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the

products described in this document without prior notice. Every effort has

been made to ensure the information in the document is correct; however,

IBASE does not guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising

from misapplication or inability to use the product or the information

contained herein, nor for any infringements of rights of third parties, which

may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

MB998 User’s Manual

iii

Compliance

This product has passed CE tests for environmental specifications and limits.

This product is in accordance with the directives of the European Union (EU).

In a domestic environment, this product may cause radio interference in

which case users may be required to take adequate measures.

This product has been tested and found to comply with the limits for a Class

B device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications.

WEEE

This product must not be disposed of as normal household

waste, in accordance with the EU directive of for waste

electrical and electronic equipment (WEEE - 2012/19/EU).

Instead, it should be disposed of by returning it to a

municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits use of the following substances in

concentrations exceeding 0.1% by weight (1000 ppm)

except for cadmium, limited to 0.01% by weight (100 ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

MB998 User’s Manual

Important Safety Information

Carefully read the precautions before using the board.

Environmental conditions:

Use this product in environments with ambient temperatures between

0˚C and 60˚C.

Do not leave this product in an environment where the storage

temperature may be below -20°C or above 80°C. To prevent from

damages, the product must be used in a controlled environment.

Care for your IBASE products:

Before cleaning the PCB, unplug all cables and remove the battery.

Clean the PCB with a circuit board cleaner or degreaser, or use cotton

swabs and alcohol.

Vacuum the dust with a computer vacuum cleaner to prevent the fan

from being clogged.

WARNING

Attention during use:

Do not use this product near water.

Do not spill water or any other liquids on this product.

Do not place heavy objects on the top of this product.

Anti-static precautions

Wear an anti-static wrist strap to avoid electrostatic discharge.

Place the PCB on an anti-static kit or mat.

Hold the edges of PCB when handling.

Touch the edges of non-metallic components of the product instead of

the surface of the PCB.

Ground yourself by touching a grounded conductor or a grounded bit of

metal frequently to discharge any static.

CAUTION

Danger of explosion if the internal lithium-ion battery is replaced by an

incorrect type. Replace only with the same or equivalent type recommended

by the manufacturer. Dispose of used batteries according to the

manufacturer’s instructions or recycle them at a local recycling facility or

battery collection point.

MB998 User’s Manual

Warranty Policy

IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of

shipment cannot be ascertained, the product serial numbers can be

used to determine the approximate shipping date.

3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are

not manufactured by IBASE, such as CPU, CPU cooler, memory,

storage devices, power adapter, panel and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL

BE TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL

BE BILLED FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest

information about the product.

2. If you need any further assistance from your distributor or sales

representative, prepare the following information of your product and

elaborate upon the problem.

Product model name

Product serial number

Detailed description of the problem

The error messages in text or in screenshots if there is any

The arrangement of the peripherals

Software in use (such as OS and application software, including the

version numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the

form and contact your distributor or sales representative.

MB998 User’s Manual

Table of Contents

Chapter 1 General Information...............................................1

1.1 Introduction .........................................................................................2

1.2 Features..............................................................................................2

1.3 Packing List.........................................................................................3

1.4 Optional Accessories...........................................................................3

1.5 Specifications......................................................................................4

1.6 Block Diagram.....................................................................................6

1.7 Product View.......................................................................................7

1.8 Board Dimensions...............................................................................8

Chapter 2 HardwareConfiguration..........................................9

2.1 Essential Installations Before You Begin............................................10

2.2 Setting the Jumpers...........................................................................11

2.3 Jumper & Connector Locations..........................................................12

2.4 Jumpers Quick Reference.................................................................13

2.4.1 JP1: PCI Express Bifurcation................................................13

2.4.2 JP2: AT/ATX Select..............................................................14

2.4.3 JP3: Clear RTC....................................................................15

2.4.4 JP4: Clear CMOS.................................................................16

2.4.5 JP5: Flash Descriptor Security Overide (Factory use only)...17

2.4.6 JP6: Sierra EM919x 5G card USB/PCIe Select ....................18

2.5 Connectors Quick Reference.............................................................19

2.5.1 CN7: COM1 & COM2 RS-232/422/485 Ports .......................20

2.5.2 CN8, CN9, CN10, CN11: SATA Connectors.........................21

2.5.3 J1: S3 Status Connector.......................................................22

2.5.4 J2: Front Panel Audio Connector..........................................23

2.5.5 J3, J4: COM3, COM4 RS232 Serial Ports ............................24

2.5.6 J5: PS2 Keyboard/Mouse Connector....................................25

2.5.7 J6: M.2 M-Key NVME (CPU)................................................26

2.5.8 J7: PWM Programming (Factory use only) ...........................26

2.5.9 J8: DVI-D Connector............................................................27

2.5.10 J9: eSPI Debug (Factory use only).......................................28

2.5.11 J10: Digital I/O Connector (4 in, 4 out)..................................29

2.5.12 J11: DDR5 UDIMM CHA 0 ...................................................30

2.5.13 J12: DDR5 UDIMM CHB 0 ...................................................30

2.5.14 J13: M.2 E-Key Socket.........................................................31

MB998 User’s Manual

vii

2.5.15 J14: M.2 M-Key Socket.........................................................31

2.5.16 J15: M.2 B-Key Socket .........................................................32

2.5.17 J16: SIM Card Slot................................................................32

2.5.18 J17: Front Panel Connector..................................................33

2.5.19 J18: 24-pin ATX Power Connector........................................34

2.5.20 J19: SPI Flash Connector (Factory use only)........................35

2.5.21 J20: USB 2.0 #7/#8 Connector .............................................36

2.5.22 ATX_12V_2X1: AT 12V Power Connector............................37

2.5.23 CPU_FAN1: CPU Fan Power Connector ..............................38

2.5.24 SYS_FAN1, SYS_FAN2: System Fan Power Connectors.....39

Chapter 3 Drivers Installation.............................................41

3.1 Introduction........................................................................................42

3.2 Intel®Chipset Software Installation Utility...........................................42

3.3 VGA Driver Installation.......................................................................44

3.4 Realtek HD Audio Driver Installation ..................................................46

3.5 Intel®ME Drivers Installation..............................................................47

3.6 Intel®Serial IO Drivers Installation .....................................................48

3.7 LAN Drivers Installation......................................................................49

Chapter 4 BIOS Setup..........................................................51

4.1 Introduction........................................................................................52

4.2 BIOS Setup........................................................................................52

4.3 Main Settings.....................................................................................53

4.4 Advanced Settings.............................................................................53

4.5 Chipset Settings.................................................................................66

4.6 Security Settings................................................................................71

4.7 Boot Settings .....................................................................................73

4.8 Save & Exit Settings ..........................................................................74

4.9 MEBx.................................................................................................75

Appendix........................................................................................77

A. I/O Port Address Map ........................................................................78

B. Interrupt Request Lines (IRQ)............................................................80

C. Watchdog Timer Configuration...........................................................81

D. Onboard Connector Types.................................................................85

E. MB998 USB Power Control Bit Mapping. ...........................................86

viii

MB998 User’s Manual

This page is intentionally left blank.

Chapter 1

General Information

The information provided in this chapter includes:

Features

Packing List

Optional Accessories

Specifications

Block Diagram

Product View

Board Dimensions

MB998 User’s Manual

1.1 Introduction

MB998 is a Micro ATX motherboard based on 13th/12th Gen Intel® Core

i9/i7/i5/i3™processors. With support for two DDR5 slots accommodating up

to 64GB memory, it supports independent displays with HDMI (2.0b), DVI-D

and 2x DisplayPort(1.4) (DP++) interface. This high-performance platform

meets demands in next-generation applications in imaging, AI, and edge

computing.

1.2 Features

13th /12th Gen Intel Core i9/i7/i5/i3 and Pentium / Celeron Processors

2x DDR5 DIMM sockets, Max. 64GB

Intel processor integrated graphics supporting HDMI (2.0b), DVI-D and

2x DisplayPort (1.4) (DP++)

Dual Intel 2.5G LAN

4x USB 3.2, 2x USB 3.1, 2x USB 2.0, 4x COM, 4x SATA III

1x PCI-E (x16) [Gen.5.0], 1x PCI-E (x4) [Gen.4.0], 1x PCI-E (x4)

[Gen.3.0]

4x M.2 (B-key, E-key and 2x M-Key)

Watchdog timer, Digital I/O, iAMT(16.1), fTPM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de IBASE Technology

IBASE Technology

IBASE Technology IB822 Series Manual de usuario

IBASE Technology

IBASE Technology MB899 Manual de usuario

IBASE Technology

IBASE Technology MBN806 Manual de usuario

IBASE Technology

IBASE Technology MI963F Manual de usuario

IBASE Technology

IBASE Technology MBN500 Manual de usuario

IBASE Technology

IBASE Technology MB879 Manual de usuario

IBASE Technology

IBASE Technology IB804 Manual de usuario

IBASE Technology

IBASE Technology MI992 Manual de usuario

IBASE Technology

IBASE Technology MI997AF Manual de usuario

IBASE Technology

IBASE Technology ARRANDALE IB957 Manual de usuario

IBASE Technology

IBASE Technology MI999 Manual de usuario

IBASE Technology

IBASE Technology MB997 Manual de usuario

IBASE Technology

IBASE Technology IB885 Manual de usuario

IBASE Technology

IBASE Technology MI920 Manual de usuario

IBASE Technology

IBASE Technology MB966 Manual de usuario

IBASE Technology

IBASE Technology MB880 Manual de usuario

IBASE Technology

IBASE Technology MB886 Manual de usuario

IBASE Technology

IBASE Technology MBN800-8L Manual de usuario

IBASE Technology

IBASE Technology MB820 Manual de usuario

IBASE Technology

IBASE Technology MB995 Manual de usuario

IBASE Technology

IBASE Technology MB820 Manual de usuario

IBASE Technology

IBASE Technology MB991 Manual de usuario

IBASE Technology

IBASE Technology MI985 Manual de usuario

IBASE Technology

IBASE Technology IB908F Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario