I3 International C-AX401C1MN Manual de usuario

C-AX401C1MN

Network Camera User Guide

WARNING:

Before attempting to connect or operate this product, read these instructions carefully.

Save this manual for future use.

To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the camera.

Refer servicing to qualified personnel only.

CONTENTS

PRECAUTIONS

NOTES OF USE

NETWORKING

SETTINGS

SPECIFICATIONS

PRECAUTIONS

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause

harmful interference, in which case users will be required to correct the

interference at their own expense.

FCC Caution:

To ensure continued compliance, use only shielded interface cables

when connecting to computer or peripheral devices. Any changes

or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

The serial number of this product may be found on top of the unit. It is

recommended that you note the serial number of this unit in the space

provided and retain this book as a permanent record of your purchase to

aid identication in the event of theft.

Model No.

Serial No.

Date of Purchase:

NOTES OF USE

Power Supply

Ensure the supplied voltage meets the power consumption requirements of this

camera before powering the camera on. Incorrect voltage may cause irreparable

damage to the video camera and will effectively void the camera warranty

Operating or storage location

Avoid shooting very bright objects (such as light ttings) for an extended pe-

riod. Avoid operating or storing the unit in the following locations:

• Extremely hot or cold places (operating temperature: -10oC to +50oC)

•Close to sources of strong magnetism

• Close to sources of powerful electromagnetic radiation, such as

radios or TV transmitters

•Close to humid or excessively dusty places

•Where exposed to mechanical vibrations

• Close to uorescent lamps or objects reecting light

• Under unstable light sources (may cause ickering)

Transportation

When transporting the camera, repack it as originally packed at the

factory, or in materials equal in quality.

Cleaning

• For maximum optical clarity, the dome cover must remain clean. Use

a soft, dry cloth to remove nger prints or dust from the dome cover.

•Use a blower to remove dust from the lens.

•Clean the body with a soft, dry cloth. If it is very dirty, use a cloth

dampened with a small quantity of neutral detergent, then wipe dry.

•Do not use volatile solvents such as alcohol, benzene, or thinners,

as they may damage the surface nishes.

Servicing

To avoid electrical shock and to preserve the product warranty, DO NOT

disassemble the camera. Refer servicing to qualied personnel only.

NOTES OF USE

Included in the box

1. Camera (C-Ax401C1MN)

2. Software CD

3. Quick start guide

Feature & Functions

SD card slot

Power (White:-/Red:+)

Network

Default Button Reset Button

Power Indicator

TV/IP Select

AL. I(Alarm In) &

AL. O(Alarm Out)

Audio In

(White)

Audio Out

(Black)

Power 24VAC 12VDC

Red 24VAC Positive

White 24VAC Negative

NETWORKING

Connecting to a camera using a network

1. Connect the camera to a PoE (Power over Ethernet) enabled switch or

router using a RJ45 Cat5 or Cat6 connection cable.

1.1. Connect the users computer to the PoE switch or router.

1. Connect the camera to a personal computer or a switch or router using

a RJ45 Cat5 or Cat6 connection cable.

1.1. Connect a properly grounded 24Volt AC power source to the camera.

Operating or storage location

2. Use the Annexxus Finder located on this CD to nd the Camera’s IP

address (default is 192.0.0.64)

3. Open an internet browser and type the IP Address of the camera into

the address bar. Hit enter.

NETWORKING

4. If you cannot connect try the following:

4.1. Wait. sometimes the router or switch will take a few seconds to

refresh the routing table

4.2. Go to control panel, network connections, and properties of the LAN

or WAN the camera is connected to. Under the Internet Protocol

(TCP/IP) properties, change the 2nd section of the IP to match the

same as your camera EG IP: 192.0.0.90 Camera: 192.0.0.64

4.3. Check the connection. Ensure all cables are properly connected.

5. Login to the camera using the proper username and password

5.1. Default Username: admin

5.2. Default Password: 1234

Network connections

SPECIFICATIONS

The specifications are subjects to be change without notice

Camera

Synch System Internal

Day & Night (IICR) D/N (auto/manual)

Image Sensor 1/3" progressive transfer CCD

Number of Effective Pixels Full scanning mode: 1280 (H) x 960 (V)

Lens Optional Mega-pixel lens: f=2.4~6mm, F1.2, f=3.0 ~ 8 mm, F1.0,

f=5~50mm F1.4

Frame rate SXVGA 1280x960 @15 fps; VGA 640x480 @30 fps,

QVGA 320x240 @30 fps

Motion detection Yes

Image Compression Method MJPEG / MPEG4

Min. Illumination Day: 0.4 lux. Night: 0.06 lux.

White Balance 2500K~10000K

Angle of view 27.73~100.18 (H) X 20.45 ~ 73.33 (V)

Video Output 1 BNC for VGA composite video (PAL/NTSC)

QVGA 320x240 @30 fps

Gamma correction 0.45

Software

Web Browser IE 6.0 or above, Netscape 7.0 or above

Password Protection Multiple password for user to login

Communication

Protocol TCP/IP, UDP/IP, HTTP, SMTP, DNS, DHCP, NTP, DDNS, FTP, RTP

Network

Ethernet 1 x 10/100 base-T Ethernet connection for LAN/WAN

Image compression method MJPEG / MPEG4

Protocol TCP/IP, UDP/IP, HTTP, SMTP, DNS, DHCP, NTP, DDNS, FTP, RTP

Connectors Screw less Terminal Jack

Environment

Weight 470g (1 lb)

Operating Temperature -10ºC ~ 50ºC (14ºF~122ºF)

Storage Temperature -20ºC ~ 60ºC (-4ºF ~ 140ºF)

Humidity 80% RH or less

Dimensions 180mm x 66mm x 55mm (7.09” x 2.6” x 2.17”)

SPECIFICATIONS

Interface

Network Port RJ45 with LEDs

Video Port BNC

Audio IN & OUT Ports 3.5mm phone jack

Alarm IN & OUT Ports 1x Alarm In / 1x Alarm out

Electrical

Audio Two-way mono audio; Full-duplex

Alarm Yes, 1 x Alarm in, 1 x Alarm out

SD card slot Yes, SD card up to 2GB supported

Power Requirement DC12V/AC24V/PoE+

Power Consumption Approx. 8W

Electric Shutter PAL:1/25, 1/50, 1/120, 1/250,1/1000, 1/10000 sec

NTSC:1/30, 1/60, 1/120, 1/250,1/1000, 1/10000 sec

Black light compensation Off, BLC1~BLC6, Auto

i³ INTERNATIONAL INC.

1.866.840.0004

www.i3international.com

Canada 780 Birchmount Road,

Unit 16, Scarborough,

ON, M1K 5H4

U.S.A. 440 Lawrence Bell Drive,

Suite 16, Williamsville

NY, 14221

Otros manuales de Cámara de seguridad de i3 International

i3 International

i3 International Ax65W Manual de usuario

i3 International

i3 International i3F416U Manual de usuario

i3 International

i3 International Am73 Manual de usuario

i3 International

i3 International Ax40W2 series Manual de usuario

i3 International

i3 International Ax45RM series Manual de usuario

i3 International

i3 International Am52RM Manual de usuario

i3 International

i3 International Ax85 Manual de usuario

i3 International

i3 International Ax32VD14 Manual de usuario

i3 International

i3 International M77R2 Manual de usuario

i3 International

i3 International Ax68R Manual de usuario

i3 International

i3 International Am57 Manual de usuario

i3 International

i3 International A 65W Series Manual de usuario

i3 International

i3 International Ax52 Series Manual de usuario

i3 International

i3 International M71 Manual de usuario

i3 International

i3 International Di721 Manual de usuario

i3 International

i3 International Ax61 series Instrucciones de funcionamiento y mantenimiento

i3 International

i3 International Ax47R series Manual de usuario

i3 International

i3 International Annexxus 52C Manual de usuario

i3 International

i3 International Ax41C1M Manual de usuario

i3 International

i3 International Ax47R4 Manual de usuario

i3 International

i3 International C-AX401C1M Manual de usuario

i3 International

i3 International Ax83C Manual de usuario

i3 International

i3 International i3F417U Manual de usuario

i3 International

i3 International Ax45RM series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

i3 International C-AX401C1MN Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas