Hyundai N100 plus Manual de usuario
INSTRUCTION MANUAL
VECTOR INVERTER
plus
RUN
DOC. NO HHIS-WZ-PK-008 (02)
Accredited
by the RvA
ISO 9001/ISO 14001/OHSAS 18001(N/A)
REGISTERED FIRM
DNV Certification B.V., THE NETHERLANDS
CONTENTS
1. Safety Message
2. Receiving and Checking
3. General Specifications
4. External dimensional diagrams and
Identifying the parts
5. Mounting
6. Wiring
7. Operation
8. Using Intelligent Input Terminals
9. Function List
10. Protective functions
11. Trouble shooting Tips
12. Maintenance and Inspection
13. Option
Page
plus
1. Safety Messages
For the best results with the N100 Series inverter,
carefully read this manual and all of the warning labels
attached to the inverter before installing and operating it, and
follow the instructions exactly. Keep this manual handy for
quick reference.
plus
Definitions and Symbols
A safety instruction(message) includes a hazard alert symbol
and a signal word, DANGER or CAUTION. Each signal
word has the following meaning:
This symbol is the "Safety Alert Symbol." It occurs with
either of two signal words : DANGER or CAUTION, as
described below
Indicates a potentially hazardous situation
which, if not avoided, can result in serious injury or death.
Indicates a potentially hazardous situation
which, if not avoided, can result in minor to moderate injury,
or serious damage to the product. The situation described in
the may, if not avoided, lead to serious results.
Important safety measures are described in CAUTION (as
well as DANGER), so be sure to observe them.
Notes indicate an area or subject of special merit,
emphasizing either the product's capabilities or common
errors in operation or maintenance.
DANGER :
CAUTION :
CAUTION
NOTE :
plus
Some drawings in this manual are shown with the protective or
shields removed in order to describe detail with more clarity.
Make sure all covers and shields are replaced before operating
this product.
This manual may be modified when necessary because of the
improvement of the product, modification, or changes in
specifications.
To order a copy of this manual, or if your copy has been
damaged or lost, contact your representative.
Hyundai is not responsible for any modification of the product
made by the user, since that will void the guarantee.
CAUTION
plus
Index to Dangers and Cautions in This Manual
Installation-cautions for Mounting Procedures
Be sure to install the unit on flame-resistant
material such as a steel plate.
Otherwise, there is the danger of fire.
Be sure not to place any flammable materials
near the inverter.
Otherwise, there is the danger of fire.
Be sure not to let the foreign matter enter vent
openings in the inverter housing, such as wire
clippings, spatter from welding, metal shavings, dust, etc.
Otherwise, there is the danger of fire.
Be sure to install the inverter in a place which can
bear the weight according to the specifications in the text.
Otherwise, it may fall and cause injury to personnel.
Be sure to install the unit on a perpendicular wall
which is not subject to vibration.
Otherwise, it may fall and cause injury to personnel.
Be sure not to install or operate an inverter which
is damaged or has missing parts.
Otherwise, it may cause injury to personnel.
Lift the cabinet by the cooling fin. When moving the
unit, never lift by the plastic case or the terminal covers.
Otherwise, the main unit may be dropped causing damage
to the unit.
When mounting units in an enclosure, install a fan or
other cooling device to keep the intake air temperature
below 40 .
5-1
5-1
5-1
5-1
5-1
5-1
CAUTION
5-1
5-1
plus
Be sure to maintain the specified clearance
area around the inverter and to provide adequate
ventilation.
Otherwise, the inverter may overheat and cause eguipment
damage or fire.
Be sure to install the inverter in a well-ventilated
room which does not have direct exposure to
sunlight, a tendency for high temperature, high
humidity of dew condensation, high levels of dust,
corrosive gas, explosive gas, inflammable gas,
grinding-fluid mist, salt damage, etc.
Otherwise, there is the danger of fire.
5-2
5-2
CAUTION
plus
DANGER
Wiring-Dangers for Electrical Practices and Wire
Specifications
Be sure to connect grounding terminal.
Otherwise, there is a danger of electric shock and/or fire.
Wiring work shall be carried out only by qualified
personnel.
Otherwise, there is a danger of electric shock and/or fire.
Implement wiring after checking that the power
supply is off. You may incur electric shock and/or fire.
Do not connect wiring to an inverter or operate an
inverter that is not mounted according the instructions
given in this manual.
Otherwise, there is a danger of electric shock and/or
injury to personnel.
When wiring the emergency stop circuit, check the
wiring thoroughly before operation.
Otherwise, it may cause injury to personnel.
For 400V class, make sure to ground the supply
neutral.
Otherwise, there is a danger of electric shock.
6-2
6-2
6-2
6-2
6-2
6-2
plus
Wiring-Cautions for Electrical Practices
Be sure that the input voltage matches the inverter
specifications:
Single-phase 200 to 230 V 50/60Hz
Be sure not to input a single phase to a three-phase
only type inverter.
Otherwise, there is the danger of fire.
Be sure not to connect an AC power supply to the
output terminals(U.V.W).
Otherwise, there is the danger of injury and/or fire.
Do not Run/Stop operation by switching ON/OFF
electromagnetic contactors on the primary or secondary
sides of the inverter.
Otherwise, there is the danger of fire.
To connect a braking resistor, follow the procedures
described in this manual.
Otherwise, there is the danger of fire.
Three-phase 200 to 230V 50/60Hz
Three-phase 380 to 460V 50/60Hz
Otherwise, there is the danger of injury and/or fire .
6-1
6-1
6-1
6-1
6-1
CAUTION
plus
Fasten the screws with the specified fastening
torque. Check for any loosening of screws.
Otherwise, there is the danger of fire.
Be sure to install a fuse in the wire for each phase
of the main power supply to the inverter.
Otherwise, there is the danger of fire.
Do not perform a withstand voltage test of the
inverter.
Otherwise, it may cause semi-conductor elements
to be damaged.
To connect a braking resistor, braking resistor unit
or braking unit, follow the procedures in this manual.
Improper connection may cause a fire.
Do not connect or disconnect wires or connectors
while power is applied to the circuit.
Otherwise, it may cause injury to personnel.
6-1
6-1
6-1
6-1
6-1
CAUTION
plus
Dangers for Operations and Monitoring
Be sure to turn on the input power supply after
closing the front case. While being energized, be
sure not to open the front case.
Otherwise, there is the danger of electric shock and/or fire.
Be sure not to operate the switches with wet hands.
Otherwise, there is the danger of electric shock.
While the inverter is energized, be sure not to touch
the inverter terminals even when the motor is stopped.
Otherwise, there is the danger of electric shock.
If the Retry Mode is selected, the motor may
suddenly restart during the trip stop. Do not approach
the machine(be sure to design the machine so that safety for
personnel is secure even if it restarts.)
Otherwise, it may cause injury to personnel and/or fire.
If the power supply is cut off for a short period of
time, the inverter may restart operation after the power
supply recovers if the command to operate is active.
If a restart may pose danger to personnel, so be sure to use
a lock out circuit so that it will not restart after power recovery.
Otherwise, it may cause injury to personnel.
The Stop Key is effective only when the stop function
is enabled. Be sure to prepare emergency stop key
separately.
Otherwise, it may cause injury to personnel.
DANGER
7-1
7-1
7-1
7-1
7-1
7-1
plus
Otros manuales para N100 plus
1
Tabla de contenidos
Otros manuales de Inversor de Hyundai
Hyundai
Hyundai N100 plus Manual de usuario
Hyundai
Hyundai HY2000sei Manual de usuario
Hyundai
Hyundai N5000 Manual de usuario
Hyundai
Hyundai N700E Manual de usuario
Hyundai
Hyundai N700 Series Manual de usuario
Hyundai
Hyundai DHY6000SE Manual de usuario
Hyundai
Hyundai N800 Series Manual de usuario
Hyundai
Hyundai HG2201-A Manual de usuario
Hyundai
Hyundai DHY18KSEm Guía de instalación
Hyundai
Hyundai HPS-300 Manual de usuario
Hyundai
Hyundai HiRun N50 Series Manual de usuario
Hyundai
Hyundai N300 Series Manual de usuario
Hyundai
Hyundai N100 Manual de usuario
Hyundai
Hyundai N700E Manual de usuario
Hyundai
Hyundai N700 Series Manual de usuario
Hyundai
Hyundai GreenPower Manual de usuario
Hyundai
Hyundai N300-P Manual de usuario
Hyundai
Hyundai HiE-S UF Series Manual de usuario
Hyundai
Hyundai HY3100LE Manual de usuario
Hyundai
Hyundai HY300SEI Manual de usuario
