Human Touch IJoy-100 Manual de usuario

Tabla de contenidos

Otros manuales de Masajeador de Human Touch

Human Touch

Human Touch CERTUS Manual de usuario

Human Touch

Human Touch Robotic Massage iJoy2400 Manual de usuario

Human Touch

Human Touch CirQlation 2 Manual de usuario

Human Touch

Human Touch feel better Cirqlation HT-1355 Manual de usuario

Human Touch

Human Touch NOVO Manual de usuario

Human Touch

Human Touch HT-820/9200 Manual de usuario

Human Touch

Human Touch HT-Reflex 4 Manual de usuario

Human Touch

Human Touch ThermoStretch HT-7120 Manual de usuario

Human Touch

Human Touch Perfect Chair Serenity PC-086 Manual de usuario

Human Touch

Human Touch PC500 Manual de usuario

Human Touch

Human Touch foot soother elite Manual de usuario

Human Touch

Human Touch GRAVIS ZG Manual de usuario

Human Touch

Human Touch ht 135 Manual de usuario

Human Touch

Human Touch feel better HT-245PS Manual de usuario

Human Touch

Human Touch NOVO Manual de usuario

Human Touch

Human Touch SUPER NOVO 2.0 Manual de usuario

Human Touch

Human Touch acuTouch 9500 Manual de usuario

Human Touch

Human Touch acuTouch 9500 Manual de usuario

Human Touch

Human Touch IJOY HT-2720 Manual de usuario

Human Touch

Human Touch HT-3000 Manual de usuario

Human Touch

Human Touch AcuTouch 8.0 Manual de usuario

Human Touch

Human Touch iJoy 2580 Manual de usuario

Human Touch

Human Touch HT 7120 Manual de usuario

Human Touch

Human Touch IJOY HT-2720 Manual de usuario

Manuales populares de Masajeador de otras marcas

ELEEELS

ELEEELS P2 Manual de usuario

Cenocco

Cenocco CC-9111 Manual de usuario

Panasonic

Panasonic EP790-C1 Manual de usuario

Adler

Adler AD 2167 Manual de usuario

Taurus

Taurus Wellness TW-MC-M Manual de usuario

Infinity

Infinity Syner-D Circadian Manual de usuario

Hydas

Hydas LH-095 Manual de usuario

AEG

AEG FM 5567 Manual de usuario

OBH Nordica

OBH Nordica Shiatus Tunes Manual de usuario

Hutech

Hutech Q9 Manual de usuario

Medisana

Medisana MM 825 Manual de usuario

SOLAC

SOLAC Therma Hydro Manual de usuario

Invacare

Invacare Texas Manual de usuario

Casada

Casada Bismarck II Manual de usuario

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manual de usuario

Medisana

Medisana HM 886 Manual de usuario

HoMedics

HoMedics BA-C200 Manual de usuario

Repose

Repose Lynton Manual de usuario

Human Touch Confidential Page 1

JJHuman Touch iJoy-100 Replacing the Main PCB

Initiator: MG Replaces: 07/22/03 Revision date: 08/24/2006

Title: Replacement of the iJoy Main PCB Module

Purpose: To provide end users with the procedure for replacement of the iJoy’s Main Control Board PCB

module assembly.

Tools/Parts Required: Phillips Screwdriver, diagonal cutters, (Paper Clip or needle Nose Pliers)

Requires Main PCB Module

Procedure:

1) TURN OFF AND UNPLUG YOUR iJoy FROM AC WALL OUTLET

2) Carefully tip your chair onto its Right Side (the side opposite the AC

cord). NOTE: Your Model may vary in appearance from the model

shown.

3) Locate the zippered flap underneath the iJoy. Unzip the zipper to reveal

the inside cavity of the seat assembly. If the zipper does not have a Pull

Tab, insert a Paper Clip through the pull hole as a temporary tab.

4) Remove the four screws securing the Main PCB Module to the frame of

the chair. The Main PCB Module (case) will be white or black depending

on your model. While supporting the weight of the Main PCB Module,

carefully move it out from the cavity of the chair.

5) Disconnect the Three (3) white plugs leading to the Main PCB Module.

You may need to cut cable/zip ties that are securing the cables. Take

care not to cut the wires. In some cases, you may also need to remove

hot melt glue from the connectors. This may be carefully removed with

the blade of a screwdriver, or by hand.

6) Remove the Main PCB Module from the seat cavity and set aside for

return to Human Touch.

7) Place the new Main PCB Module in position and replace the four (4)

screws removed in step 5.

8) Reconnect the Three (3) white plugs removed in step 5.

9) Close the zippered bottom flap, and place the iJoy upright.

10) Plug the iJoy back into the wall outlet, and turn the Main Power Switch

on.

11) Test the chair for proper operation.

Human Touch Confidential Page 2

Title: Replacement of the iJoy Main PCB Module

PCB

Module

IJoy on its Right Side

Bottom cover open

Bottom

Cover

Four

Screws

Detail insert of Zipper

with no tab

Four screws securing Main

PCB module to frame

Three cable connectors

Main

PCB

Module

Zipper

Main PCB

Module