HUANUO HNCM5 Manual de usuario

Thank you for choosing this Huanuo product! At Huanuo we

strive to provide you with the best quality products and

services in the industry. Please share your experience of our

product with others at www.huanuoav.com/reviews if you

are satisﬁed. Should you have any issues, please don't

hesitate to contact us.

Technical Support:

1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info:

[email protected] (US/CA/DE/UK/FR/IT/ES/AU)

Website:

www.huanuoav.com

Model:HNCM5

Monitor Stand

Instruction Manual

Supplied Parts and Hardware

MAX:100

mm/4 in.

MAX:100

mm/4 in.

100 mm ≈ 4 in.

75 mm ≈ 3 in.

01 X1

02 X1

04 X1

IMPORTANT SAFTY INSTRUCTIONS

Check the VESA Pattern of Monitor Before the Installation

Please carefully read all instructions before attempting installation. If you do

not understand the instructions or have any concerns or questions, please

contact our customer service at [email protected]

CAUTION: Avoid potential personal injuries and property damage!

Do not use this product for any purpose that is not explicitly speciﬁed in this

manual. Do not exceed weight capacity. We are not liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

Minimum VESA pattern:75mm/3 in.(W)x75mm/3 in.(H)

If your TV VESA is greater than 100x100 mm/4x4 in. or less than

VESA 75x75mm/3x3in., this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at

[email protected] to ﬁnd a compatible mount.

Monitor Plate

Support Pillar Cable Clip Knob Grommet Plate

06 X1

Monitor Connector Base

Tools Required [Not Included]

Drill(Optional)

Note: If there isn’t a hole on your desk, you

can use a 0.47 in.-1.18 in.(12 mm-30mm)

drill to drill a hole. The drill is NOT included.

Secure the Support Pillar [04] to the Base [03]

Step 1

(A) X3 (B) X1

M4x12mm

M-A X4

M4x16mm

M-B X4

M5x12mm

M-C X4

M5x16mm

M-D X4

M-E X4 M-F X4

5/32 in.(4mm)

(D) X1

15/64 in.(6mm)

Bolt Bolt Allen Key Allen Key

Bolt Bolt Bolt Bolt Washer Spacer

Option A

Option B

Secure the support pillar [04] to the base [03] using bolts [A] and

Allen key [C]

Secure the support pillar [04] with base [03] to desktop using

grommet plate [07] and knob [06]

Dφ 3/8（10mm）

Step 2-1

Step 2-2

Secure Cable Clip [05] and Monitor Connector [02] in

Sequence to the Support Pillar [04]

Step 2

Slide the cable clip [05] and monitor connector [02] in sequence to

the support pillar [04].

Tighten monitor connector [02] to the support pillar [04] using

Allen key [D]

Attach the Monitor Plate to the Monitor

Step 4

Select Monitor Bolts

Step 3

M5M4

Only one bolt size ﬁts your monitor.

Bolt length:Verify adequate thread engagement with bolts or bolts/spacers

combination.We recommend thread engagement by at least 5 turns.

-Too short will not hold the monitor.

-Too long will damage the monitor.

M-A/M-C

M-E

FLAT BACK MONITOR

(UNIVERSAL MONITOR PLATE)

Hang Monitor to the Stand and Secure with Bolt [B].

Step 5

M-B/M-D

M-E

M-F

ROUND BACK MONITOR

(UNIVERSAL MONITOR PLATE)

(If Needed)

Fix Tilt Angle of the Monitor

Step 6

Manage Cables

Step 7

360°

Store Allen Keys into the Cable Clip

Step 8

Features

D 15/64 in.(6mm)

C 5/32 in.(4mm)

180°

Tilt

Otros manuales para HNCM5

Tabla de contenidos

Otros manuales de Rack y soporte de HUANUO

HUANUO

HUANUO HNCM16 Manual de usuario

HUANUO

HUANUO HNLL11 Manual de usuario

HUANUO

HUANUO HNCM7 Manual de usuario

HUANUO

HUANUO HNDSK4 Manual de usuario

HUANUO

HUANUO HNLL3 Manual de usuario

HUANUO

HUANUO HNCM2 Manual de usuario

HUANUO

HUANUO HNCM7 Manual de usuario

HUANUO

HUANUO HNDSK1 Manual de programación

HUANUO

HUANUO HNCM1 Manual de usuario

HUANUO

HUANUO HNCM16 Manual de usuario

HUANUO

HUANUO HNLS07S Manual de usuario

HUANUO

HUANUO HNDS8 Manual de usuario

HUANUO

HUANUO HNCM20 Manual de usuario

HUANUO

HUANUO HNMS02 Manual de usuario

HUANUO

HUANUO HNTS3S Manual de usuario

HUANUO

HUANUO HNCM17 Manual de usuario

HUANUO

HUANUO HNDS6 Manual de usuario

HUANUO

HUANUO HNPS01 Manual de usuario

HUANUO

HUANUO HNWDS1 Manual de usuario

HUANUO

HUANUO HNHM4 Manual de usuario

HUANUO

HUANUO HNCPB Manual de usuario

HUANUO

HUANUO HNWSS1 Manual de usuario

HUANUO

HUANUO HNSS12 Manual de usuario

HUANUO

HUANUO HNCM9 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario