HP MSR 50-40 Manual de usuario
Face the front panel, install the
front mounting brackets on both
sides of the router and secure
them with M4 countersunk-head
screws, mount the router on a
rack shelf (skip this step if the
router is not to be mounted on a
rack), and attach the opacity
shield.
Install hex bolts on the chassis
as shown in the figures.
Align the holes on the opacity
shields with the hex bolts.
Press the opacity shields against
the side panels, and use M3
countersunk-head screws to
secure the opacity shields.
Apply tamper-evidence labels to
opacity shields, screws that secure
the opacity shields, field
replaceable units (FRUs), USB
ports, and air vents on interface
cards and filler panels.
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
5998-3555
Este manual sirve para los siguientes modelos
1
Otros manuales de Enrutador inalámbrico de HP
HP
HP PS110 Manual de usuario
HP
HP StorageWorks e1200-160 Manual de usuario
HP
HP P1980A Manual de usuario
HP
HP HSTNC-003W Manual de usuario
HP
HP MSR 2000 Manual de usuario
HP
HP HSR6600 Series Manual de usuario
HP
HP R110 Manual de instrucciones
HP
HP Officejet Pro 8500 Manual de usuario
HP
HP R100 Series Manual de usuario
HP
HP PS110 Manual de instrucciones
