HP Surestore Disk Array 12h - And FC60 Manual de usuario

hp surestore disk array xp operating

system configuration guide

SGI IRIX

Notice

Order number A5951-90907

E1100 A5951-96071

Hewlett-Packard Company makes no warranty of any kind with

regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or

for incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

This document contains proprietary information, which is

protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language

without the prior written consent of Hewlett-Packard. The

information contained in this document is subject to change

without notice.

Warranty

If you have any questions about the warranty for this product,

contact your dealer or local HP sales representative.

Trademarks

Windows NT, Microsoft, Windows, MS Windows, and MS-DOS

are U.S. registered trademarks of Microsoft Corporation.

Other reserved names are trademarks of the respective

companies.

Safety notices

Any servicing, adjustment, maintenance, or repair must be

performed only by authorized service-trained personnel.

Caution Denotes a hazard that can cause

hardware or software damage.

WARNING Denotes a hazard that can cause personal

injury or death.

Format conventions

literal Indicates values discussed in text, such

as commands, file names, directory

names, paths, output, or returned values.

variable Indicates that you must supply a value.

output Denotes text displayed on the screen.

CONTENTS

About This Manual 5

Revision History 6

Updates 7

1 SGI IRIX Installation 9

Hardware Installation 9

Remote Console PC and LUN Configuration Manager Installation 10

Preparing for Disk Array Device Configuration 11

Installation Requirements 12

Connectivity Options 12

Device Types 13

Installation Procedures 14

Identify the Available SCSI Paths (XP256 Only) 15

Prepare the Disk Array 16

Setting the Host Mode for the Disk Array Ports 16

Configuring the Disk Array Fibre Channel Ports 16

Define the SCSI Paths (XP256 Only) 19

Connect the Disk Array 20

Verify New Device Recognition 21

Create the Device Files 23

Partition and Label the Devices 26

Enable Command Tag Queuing 29

Create the File Systems 31

Create and Verify the Mount Directories 32

2 Troubleshooting 35

Calling the HP Support Center 36

A SCSI Path Worksheet 37

B Disk Parameters 39

SCSI TID Map for Fibre Channel Adapters 47

Byte Information Table 49

Queue Depth Parameters Table 50

Parameter Tables for OPEN-K/3/8/9/E Devices 51

Physical Partition Size Table 57

4hp surestore disk array xp operating system configuration guide: SGI IRIX

Host Bus Adapter Modes 59

C Supported Host Modes 61

D Failover and SNMP Remote Disk Array Management 63

Failover Configuration 64

SNMP Configuration 65

Glossary 67

Index 77

About This Manual

This manual describes the requirements and procedures for connecting the XP family

of disk arrays to an SGI system, and configuring the new disk array for operation with

the SGI IRIX operating system.

Installation of the HP Surestore Disk Array XP is performed by users with

administrator privileges and the HP service representative. The HP service

representative performs the physical installation of the disk array and formats the disk

devices. The user configures the system for the new devices with assistance as needed

from the HP service representative.

The HP account representative can assist in determining the supported configurations

for your system.

6hp surestore disk array xp operating system configuration guide: SGI IRIX

Revision History

5 May 1999 First release.

1 November 2000 Added Fibre Channel support.

July 2001 Updated.

Updates

For the most current information about HP Surestore XP products, visit the support

web site:

www.hp.com/support/stressfree

For information about product availability, configuration, and connectivity, consult

your HP account representative.

8hp surestore disk array xp operating system configuration guide: SGI IRIX

SGI IRIX INSTALLATION

The disk array comes with all hardware and cabling required for installation.

Installation of the disk array includes these activities:

• hardware installation

• remote console and LUN Configuration Manager installation

Hardware Installation

The HP service representative performs hardware installation as specified in the disk

array maintenance manual. Follow all precautions and procedures in the disk array

maintenance manual. Check all specifications to ensure proper installation and

configuration. Hardware installation involves several tasks:

1. Assemble all hardware and cabling.

2. Load the latest microcode and service processor (SVP) updates for full Fibre

Channel support.

3. Install and format the logical devices (LDEVs) using the SVP.

Make sure to get the desired LDEV configuration information from the user,

including the desired number of OPEN-K/3/8/9/E, CVS, LUSE, and

multiplatform (Data Exchange) devices.

Caution The SGI IRIX system can only recognize up to 32 LUs (per port). Make sure to

determine the number of disk array LUs based on this restriction.

4. Install the Fibre Channel adapters and cabling.

The total Fibre Channel cable length attached to each Fibre Channel adapter must

not exceed 500 meters (1,640 feet). Do not connect any open fibre control (OFC)

type connector to the disk array. Do not connect or disconnect Fibre Channel

cabling that is being actively used for I/O. This can cause the SGI IRIX system to

hang. Always confirm that the devices on the Fibre Channel cable are offline

before connecting or disconnecting the cable.

10 hp surestore disk array xp operating system configuration guide: SGI IRIX

Fabric

Connect the disk array port to the F-port of the fabric switch. Connect the host adapter

to the FL-port of the fabric switch.

Disk Array FC Port

The Fibre Channel topology parameters for each disk array Fibre Channel port depend

on the type of device to which the disk array port is connected. Determine the topology

parameters supported by the device, and set your topology accordingly. The type of

disk array port is also important. See “Configuring the Disk Array Fibre Channel

Ports” (page 16).

Remote Console PC and LUN Configuration Manager Installation

The user or HP service representative can install the remote console PC and HP

Surestore LUN Configuration Manager XP. You will use the LUN Configuration

Manager software on the remote console PC to set the host modes for the disk array

ports and configure the Fibre Channel ports. For instructions on installing the LUN

Configuration Manager software, see the product manual:

HP Surestore LUN Configuration Manager XP: User’s Guide

If the LUN Configuration Manager software is not installed, the HP service

representative can use the SVP of the disk array to configure Fibre Channel ports.

Please contact your HP account team for further information on Fibre Channel

configuration services.

Otros manuales para Surestore Disk Array 12h - And FC60

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de HP

HP StorageWorks 2300 - Disk System Guía rápida

HP 3PAR StoreServ 7200 2-node Manual de usuario

HP StorageWorks DAT 40m Manual de usuario

HP AJ765A - StorageWorks RDX Removable Disk Backup... Manual de instrucciones

HP HPE XP P9500 Manual de usuario

HP Surestore Disk Array 12h - And FC60 Guía rápida

HP StorageWorks EML E Series Manual de usuario

HP StorageWorks 8000 - NAS Manual de instalación

HP StorageWorks 1/8 Manual de usuario

HP 3PAR StoreServ 7200 2-node Manual de usuario

HP Pavilion p6000 - Desktop PC Manual de usuario

HP AJ765A - StorageWorks RDX Removable Disk Backup... Manual de usuario

HP StorageWorks AiO600 Instrucciones de uso

HP StorageWorks XP10000 - Disk Array Manual de usuario

HP Ultrium 215 Instrucciones de uso

HP D2D100 Manual de usuario

HP StorageWorks X5000 Manual de instrucciones

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Manual de instrucciones

HP P2000 G3 Guía de referencia rápida

HP IBRIX 9300 Manual de servicio

HP StorageWorks DAT 72 Manual de usuario

HP Converged Architecture 700 Guía de referencia rápida

HP P9000 Manual de usuario

HP StorageWorks MSL2024 Manual

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario

Dell

Dell PowerVault MD3600f Series Manual de usuario

CFI

CFI TERA STOR SATA RAID IV Manual de usuario