HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de usuario
User’s Guide
HP SureStore HD Server 4000
© Copyright 1999
Hewlett-Packard Company.
All rights reserved. Reproduction, adaptation or
translation without prior written permission is
prohibited, except as allowed under the copyright
laws.
Publication number
5967-9979
User’s Guide, First Edition,
August 1999
Applicable Products:
J3290A, J3291A, J3292A
Trademark Credits
Microsoft®, Windows®, and Windows NT®are
U.S. registered trademarks of Microsoft
Corporation. Netscape and Netscape Navigator
are U.S. trademarks of Netscape
Communications Corporation.
Warranty
This Document. The information contained in
this document is subject to change without
notice.
HEWLETT-PACKARD COMPANY MAKES NO
WARRANTY OF ANY KIND WITH REGARD TO
THIS MATERIAL, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
Hewlett-Packard shall not be liable for errors
contained herein or for incidental or
consequential damages in connection with the
furnishing, performance or use of this material.
The Product. Your product warranty and
warranty service information is in appendix B in
this guide.
Hewlett-Packard Company
8000 Foothills Boulevard
Roseville, California
95747-6588
Product Support
HP's Electronic Support Center:
http://www.hp.com/support/hdserver
See also appendix A, “Getting Support”.
Safety Considerations
Prior to the installation and use of this product,
review all safety markings and instructions.
Do not proceed beyond a WARNING or CAUTION
notice until you have understood the hazard and
have taken appropriate precautions.
Grounding. This product provides a protective
earthing terminal. There must be an
uninterruptible safety earth ground from the
main power source to the product’s input wiring
terminals, power cords, or supplied power cord
set. Whenever it is likely that the protection has
been impaired, disconnect the power cords until
the ground has been restored.
If your LAN covers an area served by more than
one power distribution system, be sure their
safety grounds are securely interconnected.
LAN cables may occasionally be subject to
hazardous transient voltages (such as lightning
or disturbances in the electrical utilities power
grid). Handle exposed metal components of the
network with caution.
For more safety information, see the
“Safety Statements” section starting on page D-4.
Servicing. There are no user-serviceable parts
inside the user-replaceable modules comprising
the product. Any servicing, adjustment,
maintenance, or repair must be performed only
by service-trained personnel.
Register Now!
Register your HP NAS product now and receive:
•Technical support updates
•Special Hewlett-Packard offers
•Details on new products and technologies
http://www.hp.com/go/surestore_nas
Instruction Manual Symbol.
If the product is marked with
this symbol, refer to product
manuals to protect the product
from damage.
WARNING Denotes a hazard that can
cause injury.
CAUTION Denotes a hazard that can
damage equipment or data.
!
3
About This Guide
This User’s Guide aids in installation and use of the HP SureStore
HD Server 4000. How to use the chapters is described below.
You can read about network attached storage and the features of
this file server in chapter 1.
1. Product Overview is an introduction to the product.
The first time you install the server, you can use the large sheet
titled Quick Setup to aid in the initial installation of your server.
Using that sheet as your primary aid, you can follow its steps and
follow its references to this User’s Guide for optional hardware
additions and for customizing the configuration once the server is
started up.
Or you can use chapter 2 of this manual for installing the server.
2. Installation is a detailed guide to initial installation and
setup, including basic configuration, and to setting up and
maintaining the hardware. It contains references to other
chapters for options. For example, after completing chapter 2,
you may need to further customize your configuration using
chapter 4 (see below).
Once the server has been started up and you wish to change or
check the configuration, use chapters 3 and 4.
3. Configuration Using the Control Panel describes the
configuration and operational tasks done at the control panel in
front of the server.
4. Configuration Using a Browser: HD Server Admin
describes the configuration and management tasks that use
the embedded web tool HD Server Admin at any station on the
network.
After completing all the installation and configuration steps, the
server is ready to serve users on the network, just like any other file
server. For instructions to map a drive to the server for a client
station, use chapter 5.
5. Setting Up Client Access describes how a network client
can find and connect to the server.
4
When the server has been fully installed and you need instructions
on various methods to restart it, use chapter 6.
6. Shutting down and Restarting describes the procedures
for shutting down the server, restarting it, and power cycling,
along with the needs for those procedures. The operating states
of the server are described.
The previous chapters aid in setting up the server. The remaining
chapters aid in tasks that you may or may not need to perform.
When you need to add a hard disk module or an optional tape drive,
use chapter 7 or 8.
7. Adding Hard Disk Drives describes the selection,
installation, and setup of additional disk drive modules.
8. Adding a Tape Drive describes selection and installation of
an optional tape drive. You can add an internal tape drive or
attach an external tape drive.
Once a tape drive is installed or attached to the server, use
chapter 9 to aid in ongoing backup and restore tasks.
9. Backing Up and Restoring Files describes the tasks of
backing up your server and of restoring files to the server.
To update the firmware running on your server, use chapter 10.
10. Updating the Firmware describes checking the current
firmware version and checking for other versions available. It
describes downloading a new version and updating the server to
use new firmware.
If you encounter problems with your server, use chapter 11.
11. Resolving Problems with Your Server describes the
indicators and symptoms you could encounter, describes how to
isolate causes, and describes how to resolve the problem or
repair the faulty component.
The appendices provide supplemental reference information—
technical and regulatory specifications, and support and warranty
services.
5
Contents
1. Product Overview
What is Network Attached Storage? 1-1
HP SureStore HD Server 4000 1-1
Features 1-2
2. Installation
Installation Summary Checklist 2-2
Unpacking Components 2-3
Adding Modules 2-5
Rack Mounting 2-5
Preparation Checklist 2-6
Connecting and Starting Up 2-8
Startup Steps 2-8
Control Panel Setup 2-9
Verify Normal Operating State 2-12
Web Browser Network Setup 2-13
Maintain Hardware Operation 2-16
3. Configuration Using the Control Panel
Control Panel Reference 3-1
Accessing Control Panel Parameters 3-2
View Mode 3-2
Setup Mode 3-2
Supplying the Password for Access 3-3
Setup Parameters and Procedures 3-4
Setting Password, Auto-Restart, Link Speed 3-4
Exiting the Control Panel 3-5
Reference Table: Control Panel Parameters, Menus, and Settings 3-6
6
4. Configuration Using a Browser: HD Server Admin
Using a Web Browser on the Network 4-1
Setup with HD Server Admin 4-3
Initial Page 4-3
Operating Features of HD Server Admin 4-4
Server Name 4-5
Date and Time 4-5
Automatic Server Restart 4-5
Administrator Username and Password 4-5
Network Configuration 4-6
Set Up Disks 4-7
Set Up Shares 4-10
Set Up Users and Groups 4-11
SNMP 4-12
Event Logging 4-12
E-Mail 4-12
Set Up Backup Schedule 4-13
Back Up Changes 4-13
Restart the Server to Effect Changes 4-13
Monitoring Status with HD Server Admin 4-14
Check Status 4-14
Check File System 4-14
Check Events 4-14
Check Backup Schedule and Log 4-14
5. Setting Up Client Access
6. Shutting Down and Restarting
Starting Up the Server 6-1
Normal Operating State 6-4
Shutting Down, Restarting, Cycling Power 6-5
Shutdown Procedures 6-5
Restart Procedures 6-6
Power Cycle Procedure 6-6
Reset to “First Time”Defaults Procedure 6-7
Summary of Operating States 6-10
7
7. Adding Hard Disk Drives
Hard Disk Drive Modules Available 7-1
Install the Drive Module 7-2
Startup and Configuration 7-6
8. Adding a Tape Drive
Installing an Internal Tape Drive 8-2
Attaching an External Tape Drive 8-8
Using Network Backup with the HD Server 8-10
9. Backing Up and Restoring Files
Using an Installed or Attached Tape Drive 9-1
Capacity 9-2
Reliability 9-2
Maintaining Tape Drives 9-3
Specifying and Scheduling a Backup 9-4
Backup Now 9-6
Schedule Backups 9-7
Making a Disaster Recovery Backup Tape 9-7
Restoring Files 9-9
Start Restore 9-10
Recovering the File System 9-10
Tape Utilities 9-11
Select Tape Drive 9-11
Erase Tape 9-11
Create Tape Catalog 9-11
Test Tape 9-11
Unload/Eject Tape 9-11
Backup/Restore Log 9-11
10. Updating the Firmware
Checking Current Image 10-1
Checking for an Update 10-1
Downloading an Update 10-2
Updating the Server 10-2
Switching to the Backup Image 10-3
8
11. Resolving Problems with Your Server
Check Indicators 11-1
Normal Indications 11-1
Abnormal Indications 11-3
Check Status in HD Server Admin 11-5
Problem Lookup 11-7
Lights (LEDs) Not Normal 11-7
Alerts on Control Panel 11-7
Other Unexpected Messages on Control Panel 11-8
Failure/Warning Status in HD Server Admin 11-9
Writing/Reading Data Fails 11-9
Server Not Appearing in Network Neighborhood 11-10
Administrator Web Access Fails 11-10
Network Failures 11-11
Access Denied when Map Drive Attempted 11-11
Access Security Fails 11-11
Drive Fails to Spin Up 11-12
Excessive Drive Temperature 11-12
Lost Administrator Password 11-12
Lost or Damaged Files 11-13
Disaster: Lost or Damaged File System 11-13
Lost or Failed Server Configuration 11-14
Firmware Fails
to Run 11-15
Backup Device Not Appearing in HD Server Admin 11-16
Resolution and Repair Procedures 11-17
Shutdown 11-17
Restart 11-18
Power Cycle 11-18
Reset Defaults 11-19
Download New Firmware 11-19
Disaster Recovery 11-19
Replace Disk Drive Module 11-23
Open the Enclosure 11-25
Close the Enclosure and Start Up 11-27
Replace the Tape Drive 11-28
Replace the Server Module 11-31
To Repair Enclosure Components 11-35
Otros manuales para J3278B - SureStore CD-ROM Server/Tower 7 NAS...
11
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Servidor de almacenamiento en red de HP
HP
HP 3PAR StoreServ 7000 Manual de usuario
HP
HP EX495 - 1.5TB Mediasmart Home Server Manual de usuario
HP
HP EX495 - 1.5TB Mediasmart Home Server Instrucciones de instalación
HP
HP DL100 - ProLiant G2 320GB File Print... Manual de instrucciones
HP
HP NetStorage 6000 Manual de instrucciones
HP
HP ProLiant 300 Series Manual de instrucciones
HP
HP AH809B Guía de instalación
HP
HP ProLiant DL180 G Instrucciones de uso
HP
HP ML110 - ProLiant G5 2TB Storage Server NAS Cómo utilizar
HP
HP ProLiant DL100 G2 DPSS Manual de instrucciones
HP
HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Instrucciones de instalación y funcionamiento
HP
HP ProLiant DL38 Manual de usuario
HP
HP NAS 4000s Manual de usuario
HP
HP StorageWorks NAS e7000 v2 Manual de usuario
HP
HP ProLiant DL585 Manual de usuario
HP
HP 345646-001 - StorageWorks NAS 2000s External Storage... Manual de instrucciones
HP
HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de usuario
HP
HP Proliant DL580 Manual de usuario
HP
HP ProLiant Server Manual del operador
HP
HP NetStorage 6000 Manual de uso y cuidado
Manuales populares de Servidor de almacenamiento en red de otras marcas
Seagate
Seagate U10 ST320423A Manual de usuario
Synology
Synology RackStation RS816 Manual
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manual de usuario
Avid Technology
Avid Technology VideoRAID ST Guía de seguridad
Western Digital
Western Digital My Cloud Home Duo Manual de usuario
PrimeArray
PrimeArray 4xxx Manual de usuario
