HP ProCurve 8116fl Instrucciones de montaje

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

ProCurve 8116fl Redundant Switch Fabric Module (J8730A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

1 in product, 1

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing 0

EL-MF877-00 Page 1

Template Revision A

EL-MF877-00 Page 2

Template Revision A

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Philips Head Screw Driver # 2

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Carefully detach the cable that is connecting the LEDs on one end of the bulkhead and the PCA on the other end.

Refer to Picture 1 for more details.

2. Remove the screws securing the bulkhead to PCA using a Philips screw driver (4 per for J8730A).

3. Remove the EMI gasket from the top (1 per) and the side (2 per) of the bulkhead. Refer to Picture 2 for more details.

4. Remove the screws securing the clip to heat sink using a Philips screw driver (24 per for J8730A). Refer to Picture 3

for more details

5. Separate the clip (12 per for J8730A) & standoff (24 for J8730A) from the heat sink.

6. Remove the screws securing the guide pins to the PCA using a Philips screw driver (3 per for J8730A). Refer to

Picture 4 for more details.

7. Separate the guide pins, heat sink, clip, standoff, EMI gasket, cable, PCA and bulkhead

10. .

11.

12.

13.

14.

15.

16.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Picture 1

Picture 2

EL-MF877-00 Page 3

Template Revision A

Picture 3

Picture 4

EL-MF877-00 Page 4

Template Revision A

Tabla de contenidos

Otros manuales de Hardware de red de HP

HP Bc1500 - BladeSystem - Blade PC Manual

HP StorageWorks X9720 Manual de servicio

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Manual de usuario

HP X5000 G2 Manual de servicio

HP Bc1500 - BladeSystem - Blade PC Manual

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manual de usuario

HP 400338-001 - KVM Switch Manual de usuario

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Manual de usuario

HP D7171A - NetServer - LPr Manual de usuario

HP AJ878A - StorageWorks 320 GB Hard Drive Manual de usuario

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Cómo utilizar

HP 180 Degree Turn Manual de usuario

HP JG602A Manual de usuario

HP zl2 Manual de usuario

HP E1459A Manual de usuario

HP HP 16500 Instrucciones de instalación y mantenimiento

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manual de usuario

HP procurve radio port 220 Manual de usuario

HP E-MSM466-R Instrucciones de montaje

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manual de usuario

HP ProLiant DL980 G7 Guía de referencia rápida

HP Deskjet 870 Manual de usuario

HP Ethernet Network Interface Card hn230e Manual de usuario

HP 634041-006 Guía de referencia rápida

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario