HP Pro100B Manual de usuario

Intel Ether Express Pro100B

Adapter

Installation Guide

Pro100B.book Page 1 Friday, December 10, 1999 4:02 PM

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use

of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent

of Hewlett-Packard Company.

Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft

Corporation.

MMXTM is a trademark of Intel Corporation.

Pentium® is a registered trademark of Intel Corporation.

Hewlett-Packard France

Commercial Desktop Computing Division

38053 Grenoble Cedex 9

France

1999 Hewlett-Packard Company

Pro100B.book Page 2 Friday, December 10, 1999 4:02 PM

Contents

Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before installing the network adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro100B PC

adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connecting to a Novell NetWare 5.0 Server . . . . . . . . . . . . . . . . . . . . 4

Microsoft Windows 95 SR2.5

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Known Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting to a Microsoft Windows NT 4.0 Server . . . . . . . . . . . . . . 7

Microsoft Windows 95 SR2.5

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Known Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting to a Novell NetWare 4.11 Server . . . . . . . . . . . . . . . . . . . 9

Microsoft Windows 95 SR2.5

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Known Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to a Novell NetWare 5.0 Server . . . . . . . . . . . . . . . . . . . 12

Microsoft Windows NT 4.0 Workstation

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting to a Microsoft Windows NT 4.0 Server . . . . . . . . . . . . . 14

Microsoft Windows NT 4.0 Workstation

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to a Novell NetWare 4.11 Server . . . . . . . . . . . . . . . . . . 16

Microsoft Windows NT 4.0 Workstation

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Pro100B.book Page 1 Friday, December 10, 1999 4:02 PM

Connecting to a Novell NetWare 5.0 Server. . . . . . . . . . . . . . . . . . . 18

Microsoft Windows 98 2nd edition

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting to a Microsoft Windows NT 4.0 Server. . . . . . . . . . . . . 19

Microsoft Windows 98 2nd edition

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting to a Novell NetWare 4.11 Server. . . . . . . . . . . . . . . . . . 20

Microsoft Windows 98 2nd edition

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting to a Windows NT 4.0 Server . . . . . . . . . . . . . . . . . . . . . 21

Microsoft Windows for Workgroups v3.11

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting to a Novell NetWare 4.11 Server. . . . . . . . . . . . . . . . . . 23

Microsoft Windows for Workgroups v3.11

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Pro100B.book Page 2 Friday, December 10, 1999 4:02 PM

Read This First

1 Read This First

Before installing the network adapter:

•If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS

field to YES.

•If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field

to NO.

•If your OS is Windows 98 2nd edition, go into the BIOS setup and set PnP

OS field to YES.

•If your OS is Windows for Workgroup 3.11, go into the BIOS setup and set

PnP OS field to NO.

How to Forcibly Modify Resources Allocated to the Intel EtherEx-

press Pro100B PCI adapter:

Do this only if needed and only if you are an advanced user.

•For advanced users only: In case of resource conflict, you can try to

change the resources for the network adapter. To do this, turn the Vectra

system power off, remove the network adapter and install it into a differ-

ent PCI slot.

Pro100B.book Page 3 Friday, December 10, 1999 4:02 PM

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95 SR2.5

2 Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95

SR2.5

Requirements

Procedure

1With the HP Vectra turned off, install the network adapter into a PCI slot.

2Connect the network cable to the newly installed network adapter.

3Power on the machine and boot to Windows 95.

4Windows 95 will detect the network adapter as “PCI Ethernet Controller”.

5Insert the driver disk and click on “Next”to continue the installation.

6When Windows 95 detects the updated driver, “Intel PRO/100B Adapter

(10/100)”, click on “Finish”.

7Click on “OK”when Windows prompts for the driver disk.

8Remove the driver disk and click on “Yes”to restart the system.

9After restarting the system, additional changes in the network properties,

such as: workgroup name, computer name, etc. may be necessary. Ask

your Network Administrator for more information. Restart the system if

changes are made.

10 From the location of the “Novell Client v3.1 for Windows 95/98”

installation files, execute “Setup.exe”.

11 Click on “Yes”to accept the “Novell Terms and Conditions”.

Operating System Windows 95 SR2.5

Driver Version 3.36.10

Driver File E100bnt.sys

Server OS Novell NetWare 5.0 Server

Client OS Client v3.1 for Windows 95/98

Pro100B.book Page 4 Friday, December 10, 1999 4:02 PM

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95 SR2.5

12 Select either “Typical”or “Custom”and click on “Install”. Typical

Installation is normally chosen. Select Custom Installation only if you are

an administrator or an advanced user. When prompted for options during

installation, ask your Network Administrator for more information.

13 Click on “Reboot”once the Novell client installation is complete.

Known Problems

Problem 1

Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5

driver) for the “Intel PRO/100B PCI adapter”, from the Intel driver diskette

during installation. This driver will not successfully install in Microsoft

Windows 95 SR2.5. A yellow exclamation mark in Device Manager will

appear next to the NIC device.To fix this problem the E100BNT.SYS-NDIS 4

driver must replace the NDIS 5 driver

To fix this problem:

1Double-click on the NIC device in device manager.

2Double-click on “Intel PRO/100B PCI adapter (TX)”.

3Select the “Driver”tab and click on “Update Driver…”

4Select “No, select driver from list”.

5Insert the driver disk and click on “Have Disk…”

6Type in the location of the driver disk and click on “OK”.

7Select “Show all devices”.

8Select “8255x-based PCI Ethernet adapter (10/100)”from the list and

click “OK”.

9Type in the location of the driver disk and click on “OK”.

10 Click on “Yes”when prompted to keep an existing file.

11 Click on “Yes”to restart the system.

Pro100B.book Page 5 Friday, December 10, 1999 4:02 PM

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95 SR2.5

Problem 2

Windows 95 will lose all network connections when thesystem comes out of

suspend mode. This APM problem is known and acknowledged by Microsoft

under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/

Q238/8/71.asp)

To prevent this problem:

1From the “Control Panel”, double-click on the “Power”icon.

2On the “Power”tab, disable “Allow Windows to manage power use on this

computer”and click on “OK”.

3Click on “Yes”to confirm the change.

4Click on “Yes”to restart the system.

Pro100B.book Page 6 Friday, December 10, 1999 4:02 PM

Connecting to a Microsoft Windows NT 4.0 Server

Microsoft Windows 95 SR2.5

3 Connecting to a Microsoft Windows NT 4.0 Server

Microsoft Windows 95

SR2.5

Requirements

Procedure

1With the HP Vectra turned off, install the network adapter into a PCI slot.

2Connect the network cable to the newly installed network adapter.

3Power on the machine and boot to Windows 95.

4Windows 95 will detect the network adapter as “PCI Ethernet Controller”.

5Insert the driver disk and click on “Next”to continue the installation.

6When Windows 95 detects the updated driver, “Intel PRO/100B Adapter

(10/100)”, click on “Finish”.

7Click on “OK”when Windows prompts for the driver disk.

8Remove the driver disk and click on “Yes”to restart the system.

9After restarting the system, additional changes in the network properties,

such as: workgroup name, computer name, etc. may be necessary. Ask

your Network Administrator for more information. Restart the system if

changes are made.

Operating System Windows 95 SR2.5

Driver Version 3.36.10

Driver File E100bnt.sys

Server OS Windows NT 4.0 Server

Client OS Microsoft

Pro100B.book Page 7 Friday, December 10, 1999 4:02 PM

Connecting to a Microsoft Windows NT 4.0 Server

Microsoft Windows 95 SR2.5

Known Problems

Problem 1

Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5

driver) for the “Intel PRO/100B PCI adapter”, from the Intel driver diskette

during installation. This driver will not successfully install in Microsoft

Windows 95 SR2.5. A yellow exclamation mark in Device Manager will appear

next to the NIC device. To fix this problem the E100BNT.SYS-NDIS 4 drive

must replace the NDIS 5 driver.

To fix this problem:

1Double-click on the NIC device in device manager.

2Double-click on “Intel PRO/100B PCI adapter (TX)”.

3Select the “Driver”tab and click on “Update Driver…”

4Select “No, select driver from list”.

5Insert the driver disk and click on “Have Disk…”

6Type in the location of the driver disk and click on “OK”.

7Select “Show all devices”.

8Select “8255x-based PCI Ethernet adapter (10/100)”from the list and click

“OK”.

9Type in the location of the driver disk and click on “OK”.

10 Click on “Yes”when prompted to keep an existing file.

11 Click on “Yes”to restart the system.

Problem 2

Windows 95 will lose all network connections when the system comes out o

suspend mode. This APM problem is known and acknowledged by Microsoft

under ref ID: Q238871 (http://support.microsoft.com/support/kb/articles/

Q238/8/71.asp)

To prevent this problem:

1From the “Control Panel”, double-click on the “Power”icon.

2On the “Power”tab, disable “Allow Windows to manage power use on this

computer”and click on “OK”.

3Click on “Yes”to confirm the change.

4Click on “Yes”to restart the system.

Pro100B.book Page 8 Friday, December 10, 1999 4:02 PM

Tabla de contenidos

Otros manuales de Tarjeta de red de HP

HP 289166-40B Manual de usuario

HP External Media Cards Manual de usuario

HP 441877-00B Manual de usuario

HP Q6275A Manual de usuario

HP NetMail/3000 Manual de usuario

HP 3C905B-TX Manual de usuario

HP Memory Modules Manual de usuario

HP A7011A Manual de usuario

HP ESL E-Series Manual de usuario

HP Ethernet USB Network Adapter hn210e Manual de usuario

HP Vectra VE5 4 Manual de usuario

HP 100B-TX Manual de usuario

HP HP-UX SNAplus2 Manual de instrucciones

HP hn210w Manual de usuario

HP NC373F Manual de usuario

HP 517 Manual de usuario

HP Broadband Service Analyzer Manual de usuario

HP 3C509B-TP Manual de usuario

HP NC510C Manual de usuario

HP Ethernet USB Network Adapter hn210e Manual de usuario

HP StorageWorks AB232A Manual de usuario

HP hn210w Manual de usuario

HP AD331A Manual de usuario

HP PN1050 Manual de usuario

Manuales populares de Tarjeta de red de otras marcas

FirstComm

FirstComm OBiWiFi5G Manual de usuario

Sun Microsystems

Sun Microsystems Interface Adapter Manual de usuario

TRENDnet

TRENDnet TU2-ETG Manual de usuario

YASKAWA

YASKAWA SI-EN3 Manual de usuario

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manual de usuario

Belkin

Belkin F5D7050 Manual de usuario

3Com

3Com EtherLink 3C509B Manual de usuario

TRENDnet

TRENDnet TEG-PCITX Manual de usuario

Cisco

Cisco MC16E Manual de usuario

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manual de usuario

TwinMOS

TwinMOS Booming Manual de usuario

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manual de usuario

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manual de usuario

National Instruments

National Instruments NI 9234 Manual de usuario

Hama

Hama 49276 Manual de usuario

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manual de operación

Compaq

Compaq Wireless LAN 100 Manual de usuario

Bose

Bose PowerMatch Dante Manual de usuario