HP T200 Manual de usuario

Implementation and Best Practice Guide

HP MultiSeat Computing Solution

Development Company, L.P. The information

contained herein is subject to change

without notice.

Microsoft, Internet Explorer, MultiPoint, and

Windows are U.S. registered trademarks of

Microsoft Corporation.

Adobe and Adobe Flash Player are

trademarks or registered trademarks of

Adobe systems Incorporated.

Intel and Intel Active Management

Technology (AMT) are trademarks of Intel

corporation in the U.S. and other countries.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products and

services. Nothing herein should be

construed as constituting an additional

warranty. HP shall not be liable for technical

or editorial errors or omissions contained

herein.

This document contains proprietary

information that is protected by copyright.

No part of this document may be

photocopied, reproduced, or translated to

another language without the prior written

consent of Hewlett-Packard Company.

Second Edition (August 2011)

First Edition (March 2011)

Document Part Number: 656125-002

Table of contents

1 Fundamentals ................................................................................................................... 1

Offerings of Microsoft® Windows® MultiPoint™ Server 2011 ...................................................... 1

OEM Standard ......................................................................................................... 1

OEM Premium .......................................................................................................... 1

Academic Volume License .......................................................................................... 1

Description of Modes ............................................................................................................... 2

Maintenance ............................................................................................................ 2

Normal .................................................................................................................... 2

Remapping Stations .................................................................................................................. 2

Topology ................................................................................................................................ 2

Topology Examples ................................................................................................... 4

Private USB .............................................................................................................. 4

Qualified USB Hubs .................................................................................................. 4

2 Best Practices for Setting Up a MultiSeat Environment ....................................................... 5

USB-connected MultiSeat Environment ........................................................................................ 5

Ethernet-connected MultiSeat Environment ................................................................................... 5

3 Best Practices for Installation of Drivers with the Volume License Operating System .......... 7

Recommended Method (Automatic Driver Installation) ................................................................... 7

Manual Driver Installation ......................................................................................................... 7

4 Performance Considerations ............................................................................................. 8

5 Licensing and Support ...................................................................................................... 9

6 External Links ................................................................................................................. 10

Appendix A Troubleshooting ............................................................................................. 11

Appendix B LED Codes ....................................................................................................... 12

iii

1 Fundamentals

Offerings of Microsoft

Windows

MultiPoint™

Server 2011

OEM Standard

●HP MultiSeat ms6005 or ms6200 Desktop (the host PC) ships preinstalled from the factory with

Windows MultiPoint Server 2011, which includes the server Certificate of Authenticity (COA) and

the host station Client Access License (CAL)

●HP zero clients sell separately; client operating system CAL is included

●HP preinstalls Windows MultiPoint Server 2011 in 18 languages

●Domain join not allowed

●Operating system maximum number of users: ten (see Performance Considerations on page 8)

●Maximum memory: 8 GB

OEM Premium

●HP MultiSeat ms6005 or ms6200 Desktop (the host PC) ships preinstalled from the factory with

Windows MultiPoint Server 2011, which includes the server Certificate of Authenticity (COA) and

the host station Client Access License (CAL)

●HP zero clients sell separately; client operating system CAL is included

●HP preinstalls Windows MultiPoint Server 2011 in 18 languages

●Domain join allowed

●Operating system maximum number of users: 20 (see Performance Considerations on page 8)

●Maximum memory: 32 GB

Academic Volume License

●HP MultiSeat ms6005 or ms6200 Desktop sold with FreeDOS installed and no Client Access

License (CAL) provided

●Requires the purchase of the Academic Volume License version of MultiPoint Server 2011

●Device drivers must be downloaded from HP and installed

●HP zero clients do not include the user CAL

●Available in multiple languages: 18 fully localized, 20 with operating system localized (MultiPoint

Manager is not localized)

Offerings of Microsoft® Windows® MultiPoint™ Server 2011 1

●Domain join allowed

●Operating system maximum number of users: 20 (see Performance Considerations on page 8)

Description of Modes

Microsoft Windows MultiPoint Server 2011 can operate in two different modes described below:

●Maintenance, see Maintenance on page 2

●Normal, see Normal on page 2

Maintenance

Maintenance mode is the state of the MultiPoint Server 2011 system in which the administrative user

performs maintenance tasks. No stations switch to this mode—this mode ends all user sessions. All

software and driver installations are performed in Maintenance mode, including updating system

settings.

Maintenance Mode can be accessed by choosing "Switch to Maintenance Mode" from within the

MultiPoint Manager.

Normal

Normal mode is the default mode. Users normally log in and perform individual task on each station in

Normal mode. Each session runs a separate RDP session. Software updates and driver installations

should not be performed in Normal mode.

Remapping Stations

MultiSeat uses an auto-mapping function to associate each attached zero client. If the auto-mapping

function fails to work, then the user can manually associate their workstation with this function. Auto-

mapping does not apply to the host PC station. The remap function could be used to reconfigure the

host PC station’s association if the configuration has changed.

To perform this action, choose "Remap all stations" from the MultiPoint Manager.

Topology

●Windows MultiPoint Server 2011

◦Windows MultiPoint Server 2011 supports PS/2 keyboard/mouse on the host system.

◦Windows MultiPoint Server 2011 supports audio and microphone on the host PC station.

NOTE: For this to function, the host stations must be configured using PS/2 keyboard and

mouse. It will not function with USB keyboard or mouse.

◦Windows MultiPoint Server 2011 supports daisy-chaining of client devices connected by USB

cable. Daisy-chaining can simplify cabling and extend the distance between the host and a

station without additional USB hubs.

2 Chapter 1 Fundamentals

NOTE: Daisy-chaining is not supported for Ethernet-connected zero clients.

HP supports no more than three client devices per chain.

All clients in the chain must be AC powered.

NOTE: The maximum cable length supported by USB 2.0 specification is five meters.

You cannot mix t100 or t150 clients with t200 Zero Clients connected to the same MultiSeat host

PC, but you can mix t100 and t150 client devices.

●HP MultiSeat Thin Client t100 Series (t100 and t150 client devices)

◦All t100 series client devices are connected by USB cable directly to the host system.

◦The MultiSeat Thin Client t100 has ports for PS/2 keyboard/mouse, microphone, speakers/

headphones, and a VGA monitor.

◦The MultiSeat Thin Client t150 has two USB ports and a power connector, which can be

used with an AC adapter or with an HP monitor with power-pass-through (such as the HP

LE1851wt 18–inch Widescreen LCD Monitor). (AC adapter and monitor are sold separately).

◦If the optional DC adapter is not connected, the t150 client supports only one 100 mA USB

device (low power), such as some flash drives.

●HP t200 Zero Client for MultiSeat

NOTE: The host PC must be an HP MultiSeat ms6005 or ms6200 Desktop. The t200 Zero Client

is not supported with the HP MultiSeat ms6000 Desktop.

◦The t200 Zero Clients may be connected by Ethernet or by USB cable directly to the host

system.

◦The t200 Zero Client has ports for Ethernet, microphone, speakers/headphones, and a VGA

monitor.

◦The t200 Zero Client has four USB ports and a power connector, which can be used with an

AC adapter or with an HP monitor with power-pass-through (such as the HP LE1851wt 18–

inch Widescreen LCD Monitor). (AC adapter and monitor are sold separately).

◦If the optional DC adapter is not connected, the t200 Zero Client supports a standard USB

mouse and keyboard and one 100 mA USB device (low power), such as some flash drives.

If the optional DC adapter is connected to a working power outlet or to the monitor, the t200

Zero Client supports a USB keyboard, a USB mouse, and two 500 mA (high power) USB

devices.

Topology 3

Topology Examples

●HP MultiSeat Thin Clients t100 Series

◦Six sessions: five t100 series clients connected directly to the host PC + host station

◦Ten sessions: nine t100 series clients connected directly to the host PC + host station

(configured with PS/2 mouse and keyboard)

●HP t200 Zero Clients for MultiSeat

◦Five sessions: four t200 Zero Clients connected directly via USB cable to the host PC + host

station

◦Six sessions: five t200 Zero Clients and the host station, each connected to the LAN (local

area network) via Ethernet cable

◦Seven sessions: three t200 Zero Clients daisy-chained (the first connected to the second

which is connected to the third which is connected directly via USB cable to the host PC +

host station) and three t200 Zero Clients and the host station, each connected to the LAN via

Ethernet cable

Private USB

Windows MultiPoint Server 2011 now provides private USB functionality on client stations. For

example, a USB flash drive connected to a USB port on a t150 client or a t200 Zero Client will be

accessible only to the user on that station. A USB flash drive connected to the host PC, however, will be

accessible to all users. Refer to the Microsoft TechNet page for details of the behavior with various USB

device types.

Qualified USB Hubs

●Belkin 4-port, powered USB 2.0 hub: HP p/n A519110

●Belkin 7-port, powered USB 2.0 hub: HP p/n A519109

●Belkin 7-port, lighted hub: vendor p/n F5U700-BLK

●Belkin Hi-Speed USB 2.0 4-port lighted hub: vendor p/n F5U403TTBLK

4 Chapter 1 Fundamentals

2 Best Practices for Setting Up a

MultiSeat Environment

A USB-connected environment is ideal when plug-and-play simplicity is desired or in settings with no

Ethernet network infrastructure. An Ethernet-connected environment is ideal when the distance needed

between the host PC and its clients must be greater than USB allows. It can also help reduce cable

clutter around the host PC.

NOTE: If the t200 Zero Client drivers are not preinstalled on your host PC, please download them

from the HP website. Go to hp.com, click SUPPORT & DRIVERS, click Drivers & Software, type

the host PC model number (ms6005 or ms6200) in the field, and click SEARCH to find the latest

t200 Zero Client drivers.

USB-connected MultiSeat Environment

This setup is suitable for either t100 series clients or t200 Zero Clients.

NOTE: You cannot mix t100 series clients and t200 Zero Clients connected to the same MultiSeat

host PC, but you can mix t100 and t150 client devices.

▲Connect the zero clients to the host PC:

●Connect singleton zero clients (not in a daisy chain) via USB cable directly to the host PC.

●To connect zero clients in a daisy chain, connect each client via USB cable to the next, and

then connect one end of the daisy chain via USB cable to the host PC.

NOTE: Up to three zero clients may be connected by USB cable in a daisy chain.

Each zero client in a daisy chain must be powered using the optional power adapter

connected to an AC power source or an HP monitor with power-pass-through.

Ethernet-connected MultiSeat Environment

This setup is suitable for the t200 Zero Client only.

●Daisy chaining off an Ethernet-connected zero client is not supported.

●With no USB connection to supply power, zero clients must have another source of power: either

an optional power adapter connected to an AC power source or an HP monitor with power-pass-

through.

●An Ethernet network infrastructure is required.

◦This should be a 100 Mb or one Gb system.

◦DHCP is highly recommended.

◦Can only see t200 Zero Clients on same subnet as host PC.

USB-connected MultiSeat Environment 5

●Ethernet-connected t200 Zero Clients look like local USB devices to the operating system as

displayed in MultiPoint Manager.

●There are two types of hardware reset:

◦Clear assignment—hold recessed reset button while powering on until LED blinks blue/amber

◦Clear all (factory defaults)—hold the reset button for seven seconds until the LED goes out.

This does not need to be during power on, but the device must NOT be connected to a host

(according to the Network Stations tab in MultiPoint Manager).

1. Connect the host PC to the LAN via Ethernet cable.

2. Connect the t200 Zero Clients to the LAN via Ethernet cable.

3. (Recommended) Power on one at a time or small groups at a time.

4. (Recommended) In the Network Stations tab of the MultiPoint Manager, change the Name

and/or Location.

5. (Recommended) Label each unit.

6. Use one of two methods of assigning t200 Zero Clients to a host PC:

●Client-based (hotkey)

●Host-based (GUI)

Client-based (hotkey) Assignment

1. In the Network Stations tab of the MultiPoint Manager, set up hotkeys on hosts.

Each host in the subnet must have a unique hotkey.

2. Ensure that the t200 Zero Client is not already assigned to a host by confirming that the LED blinks

alternately blue and amber. Refer to the reset methods above, if needed.

3. On the keyboard connected to the t200 Zero Client, press the key that matches the hotkey set on

the host PC to which you want this client assigned.

4. Wait 30 seconds to one minute until device is ready for login.

Host-based (GUI) Assignment

1. Go to the Network Stations tab in MultiPoint Manager.

2. Select the client(s) you want to assign to this host.

3. Choose Assign to this server from the task area on the right.

NOTE: You may include USB-connected t200 Zero Clients and daisy-chained t200 Zero Clients

along with Ethernet-connected t200 Zero Clients on a host PC. They must be connected as described in

USB-connected MultiSeat Environment on page 5.

6 Chapter 2 Best Practices for Setting Up a MultiSeat Environment

Otros manuales para T200

Tabla de contenidos

Otros manuales de De oficina de HP

HP Presario SR5500 - Desktop PC Manual de usuario

HP Omni 120-1125 Manual de usuario

HP Pavilion t300 - Desktop PC Manual de usuario

HP Pro 3520 Series Instrucciones de uso

HP Pavilion MS214 Manual de usuario

HP KAYAK XM600 Manual de lista de piezas

HP DL740 - ProLiant - 4 GB RAM Manual de usuario

HP Vectra VEi 7 Manual del producto

HP Pavilion Slimline s7500 - Desktop PC Hoja de especificaciones

HP LaserJet 4300 series Manual de usuario

HP Model 745 - VME Workstation Manual de usuario

HP Presario SR5600 - Desktop PC Manual de funcionamiento

HP Xw4600 - Workstation - 2 GB RAM Manual de uso y cuidado

HP Pavilion t330 Manual de usuario

HP dx2310 - Microtower PC Manual de usuario

HP Compaq Business Desktop dx2000 Instrucciones de uso

HP HP 402 G1 Manual de operación y mantenimiento

HP EliteOne 705 G2 Manual de usuario

HP Pavilion a700 - Desktop PC Instrucciones de instalación

HP ZBook 15u G5 Manual

HP DB252A Manual de usuario

HP Compaq D315 Manual de uso y cuidado

HP ENVY Recline 27-k050xt TouchSmart Manual de instrucciones

HP SR5605F - Compaq Presario - 1 GB RAM Manual de uso y mantenimiento

Manuales populares de De oficina de otras marcas

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario

Everex

Everex eXplora Manual de usuario

Lenovo

Lenovo ThinkCentre M75e Manual de usuario

Dell

Dell Alienware Area-51 R4 Manual de usuario