HP Sangoma 2 Instrucciones de instalación

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category:

Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

Sangoma 2 Port FXO2 Port FXS Voice Card / J9518A

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0

Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm 5

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 2

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers

EL-MF877-00 Page 2

Template Revision A

Components, parts and materials containing

radioactive substances 0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Slotted Screw Driver

Phillips Screw Driver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove the 12V power cable. Refer to Pic.1

2. Remove the fax sync cable. Refer to Pic 2

3. Snap off the 2 rivets attaching the insulator pad. Using slotted screw driver, remove the nylon screw attaching the

insulator pad to the PCA. Refer to Pic.3

4. Remove the insulator pad

5. Using the slotted screw driver, remove the 3 stand-offs that connects the 2 main PCAs

6. Remove the low profile bracket by removing the 2 screws securing the bracket onto the PCA. Remove the screws

using Phillips screw driver.

7. Remove the 2 small PCAs (1 green and 1 red) from 1 of the main PCA

8. Using Phillips screw driver, unscrew the 2 screws which attached the smallest PCA to the PCA which does not has

any RJ ports.

10.

11.

12.

13.

14.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Pic Illustration

EL-MF877-00 Page 3

Template Revision A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de HP

HP t628 Manual de usuario

HP P Class 450/500/550/600/650/700/750 Manual

HP Xw8400 - Workstation - 4 GB RAM Manual de usuario

HP 6-Port SATA RAID Manual de usuario

HP 64782 Manual de usuario

HP MCS G2 Guía de instalación

HP FlexFabric 12908E LSXM108XFAN Manual de usuario

HP 3000 Series Manual

HP 98640A Manual de instalación y funcionamiento

HP 405132-B21 Manual de usuario

HP CB001A Manual de usuario

HP E2465A PowerPC 604 PGA Manual de usuario

HP AF079A Guía de instalación

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manual de usuario

HP D7171A - NetServer - LPr Manual de usuario

HP Smart Array 5300A Manual de usuario

HP USB 3.0 4-Port SuperSpeed PCIe x1 Card Manual de usuario

HP E5000 Manual de usuario

HP 64793 Series Manual de usuario

HP A4800A Guía

HP StorageWorks FC1142SR Manual de usuario

HP 5998-1600 Manual de usuario

HP 8168E Manual de usuario

HP StoreOnce 2700 Manual del operador

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario