Hoymiles HM-1000NT Manual de usuario

Quick Installation Guide

HM-1000NT/HM-1200NT/HM-1500NT AP040239 REV1.1 1 / 2

1. Accessories

Item

Description

AC Bus Cable, 12/10 AWG Cable

DC Extension Cable, 1m

M8*25 screws

AC Connector Unlock Tool

Bus Connector Unlock Tool

AC Sub Cap

AC Bus End Cap, IP67

*Note: All accessories above are not included in the package, and need to be purchased

separately. Please contact our sales representative for the price. (M8 screws need to be

prepared by installer-self.)

2. Installation Steps

Please make sure the microinverter is installed under the required environment.

(Please refer to product user manual for more details.)

2.1 Pre-installation

A) Plan the cable length to make the bus cable aligned with each PV module.

B) Install the AC bus end cap:

- Uses the bus connector unlock tool to unlock the port upper cover;

- Loose the three screws with the screwdriver. Untighten the cap as circled below,

and remove the extra cable.

- Screw the cap back to port, and plug in the AC bus end cap.

- Plug the upper cover back to the bus connector.

2.2 Installation Steps

Step 1. Fix Microinverter on the Rail

A) Mark the approximate center of each panel on the frame.

B) Fix the screw on the rail.

C) Hang the microinverter on the screw (shown as picture below), and tighten the

screw. The silver cover side of the microinverter should be facing the panel.

*Note: Please install the microinverter at least 50cm above the ground/roof for better

communication with Hoymiles DTU.

Step 2. Complete the AC Connection

A) Attach the AC bus cable to the mounting rail, and fix the cable with tie wraps.

Quick Installation Guide

HM-1000NT/HM-1200NT/HM-1500NT AP040239 REV1.1 2 / 2

B) Push the AC connector of microinverter to the trunk cable connector until you hear

“click”.

C) If there is any vacant bus port, please plug the AC sub cap on the vacant plug to

ensure waterproof and dustproof

*Note: Under the circumstances that need to remove the inverter AC cable from bus port,

please use the AC connector unlock tool and insert the tool into the side of AC port.

Step 3. Install AC End Cable

A) Prepare the AC end cable with the proper length, and insert one side of the cable

into the cap. Match the L, N and Ground line into the slot accordingly. Tighten

the screws, and then tighten the cap back to the port. Plug the upper cover back

to the bus connector.

B) Connect the other side of the AC end cable to the distribution box, and wire it to

the local grid network.

Step 4. Create an Installation Map

A) Peel the removable serial number label from each microinverter (The position of

the label is shown as below.)

B) Affix the serial number label to the respective location on the installation map.

Step 5. Connect PV Modules

A) Mount the PV modules above the microinverter.

B) Connect the PV modules’ DC cables to the DC input side of the microinverter.

Step 6. Energize the System

A) Turn on the AC breaker of the branch circuit.

B) Turn on the main AC breaker of the house. Your system will start to generate

power after about two-minute wait time.

Step 7. Set Up the Monitoring System

Refer to the DTU User Manual or DTU Quick Install Guide, and Quick Installation

Guide for HMP Online Registration to install the DTU and set up your monitoring

system.

Product information is subject to change without notice. (Please download reference

manuals at www.hoymiles.com.)

Este manual sirve para los siguientes modelos

Otros manuales de Inversor de Hoymiles

Hoymiles

Hoymiles HM-800N Series Manual de usuario

Hoymiles

Hoymiles MI-1000N Manual de usuario

Hoymiles

Hoymiles HM-1500N Manual de usuario

Hoymiles

Hoymiles HYS-3.0LV-EUG1 Manual de usuario

Hoymiles

Hoymiles HME-1000T-AU Manual de usuario

Hoymiles

Hoymiles MI-300NT Manual de usuario

Hoymiles

Hoymiles HM-600T Manual de usuario

Hoymiles

Hoymiles HME-1500-AU Manual de usuario

Hoymiles

Hoymiles HM-1500NT Manual de usuario

Hoymiles

Hoymiles DTU-WLite Manual de usuario

Hoymiles

Hoymiles MI-1000NT Manual de usuario

Hoymiles

Hoymiles HM-2000T-S Series Manual de usuario

Hoymiles

Hoymiles HM-1000 Manual de usuario

Hoymiles

Hoymiles MI-300T Manual de usuario

Hoymiles

Hoymiles HM-800 Manual de usuario

Hoymiles

Hoymiles HMS-1800 Manual de usuario

Hoymiles

Hoymiles HMS-900-2T Manual de usuario

Hoymiles

Hoymiles HMS-1800-4T Manual de usuario

Hoymiles

Hoymiles HM-1000 Manual de usuario

Hoymiles

Hoymiles HMS-2000C-4T Series Manual de usuario

Hoymiles

Hoymiles HM-1200NT Manual de usuario

Hoymiles

Hoymiles HM-600 Manual de usuario

Hoymiles

Hoymiles HMS-500-1T-NA Series Manual de usuario

Hoymiles

Hoymiles HM-300 Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario