Hoymiles HM-1500N Manual de usuario

1. Accessories

*Note: Please install the microinverter at least 50 cm above the ground/roof for better communication with the Hoymiles DTU

Step 2. Connect AC Cables of Microinverter

Item Description

AC End Cable (Female), 2 m 12 AWG Cable

M8 × 25 Screws

DC Extension Cable, 1 m

AC Female End Cap, IP67

A) Plug the AC connector of the first

microinverter into the connector of the

second microinverter to form a

continuous AC branch circuit.

B) Install the AC end cap on the open AC

connector of the last microinverter in

the AC branch circuit.

*Note: All accessories listed above are not included in the package, and need to be purchased separately. Please contact our sales representative

for pricing information. (M8 screws need to be prepared by the installer.)

2. Installation Steps

Ensure the microinverter is installed in the required environment. (Refer to product user manual for more details.)

Step 1. Attach Microinverter on Rail

A) Mark the approximate center of each panel on the frame.

HM-1500N Series Quick Installation Guide

B) Fix the screw on the rail.

C) Hang the microinverter on the screw (as

shown in the picture below), and tighten

the screw. The silver cover side of the

microinverter should be facing the panel.

*Note: The length of AC cable on

microinverter is around 2.04 m. Use AC

extension cable if two microinverters are

more than 2.04 m apart.

*Applicable to HM-1000N/1200N/1500N microinverters

Tosheet ______

Sheet_____of_____

Hoymiles Microinvert er Installation Map

PleaseMake N for North

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

COLUMN

ROW

AP040228 V1.3

CustomerInformation: DTUSerial Number

Azimuth:

Tilt:

Paneltype:

Step 5. Connect PV Modules

Step 6. Energize the System

A) Turn on the AC breaker of the branch circuit.

B) Turn on the main AC breaker of the house.

Your system will start to generate power in

about two minutes.

A) Mount the PV modules above the

microinverter.

B) Connect the PV modules’ DC cables to the

DC input side of the microinverter.

Step 4. Create an Installation Map

A) Peel the removable serial number label

from each microinverter (the position of

the label is shown as below).

B) Affix the serial number label to the

respective location on the installation map.

*Note: L: Brown wire N: Blue wire G: Yellow/Green wire

Please use a 12 AWG cable as the AC end cable.

Product information is subject to change without notice. (Please download reference manuals at www.hoymiles.com.)

Step 3. Connect AC End Cable

Step 7. Set Up the Monitoring System

Refer to the DTU User Manual, DTU Quick Installation Guide, and

Quick Installation Guide for S-Miles Cloud to install the DTU and set

up your monitoring system.

A) Make the AC end cable.

1. Separate the AC port into 3 parts.

2. Insert the AC cable through Part 3 into Part

2, and complete the wiring for the L, N and

Ground inside the AC port in Part 1.

Coated with solder

Part 1 Part 2 Part 3 AC Cable

Part 1 Part 2

3. Plug the AC port Part 2 into Part 1 once the

wiring is complete, and then screw on Part

3 to complete the AC extension cable.

Part 3

B) Connect the AC end cable to the AC male

connector from the first microinverter to

complete the circuit.

C) Connect the other side of the AC end cable to the distribution box, and wire it to the local grid network.

Tabla de contenidos

Otros manuales de Inversor de Hoymiles

Hoymiles

Hoymiles HMS-1000W-2T Series Manual de usuario

Hoymiles

Hoymiles HM-300N Manual de usuario

Hoymiles

Hoymiles HMS-300-1T Manual de usuario

Hoymiles

Hoymiles HM-1800T-S Manual de usuario

Hoymiles

Hoymiles DTU-Pro Manual de usuario

Hoymiles

Hoymiles MI-1000 Manual de usuario

Hoymiles

Hoymiles HM-1000 Manual de usuario

Hoymiles

Hoymiles HMS-350-1T Manual de usuario

Hoymiles

Hoymiles HME-1500-AU Manual de usuario

Hoymiles

Hoymiles MI-300 Manual de usuario

Hoymiles

Hoymiles MI-600 Manual de usuario

Hoymiles

Hoymiles HMS-1600-4T-NA Manual de usuario

Hoymiles

Hoymiles HMS-900-2T Manual de usuario

Hoymiles

Hoymiles HMS-500-1T Manual de usuario

Hoymiles

Hoymiles HMS-500-1A Manual de usuario

Hoymiles

Hoymiles HMS-500-1T Manual de usuario

Hoymiles

Hoymiles HMS-2000C-4T Series Manual de usuario

Hoymiles

Hoymiles HYS-3.0LV-EUG1 Manual de usuario

Hoymiles

Hoymiles HM-800 Manual de usuario

Hoymiles

Hoymiles HMS-2000C-4T Series Manual de usuario

Hoymiles

Hoymiles MI-1000 Manual de usuario

Hoymiles

Hoymiles MI-1000 Guía de instalación

Hoymiles

Hoymiles HM-1000 Manual de usuario

Hoymiles

Hoymiles HM-600P Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario