Horiba D-73 Manual de usuario

Portable pH/ORP/Ion Meter

D-73

Instruction Manual

CODE:GZ0000333606A

Preface

This manual describes the operation of the Portable pH/ORP/Ion Meter D-73.

Be sure to read this manual before using the product to ensure proper and safe

operation of the product. Also safely store the manual so it is readily available whenever

necessary.

Product specifications and appearance, as well as the contents of this manual are

subject to change without notice.

■Warranty and responsibility

HORIBA, Ltd. warrants that the Product shall be free from defects in material and

workmanship and agrees to repair or replace free of charge, at option of HORIBA, Ltd.,

any malfunctioned or damaged Product attributable to responsibility of HORIBA, Ltd. for

a period of one (1) year from the delivery unless otherwise agreed with a written

agreement. In any one of the following cases, none of the warranties set forth herein

shall be extended;

・Any malfunction or damage attributable to improper operation

・Any malfunction attributable to repair or modification by any person not authorized

by HORIBA, Ltd.

・Any malfunction or damage attributable to the use in an environment not specified in

this manual

・Any malfunction or damage attributable to violation of the instructions in this manual

or operations in the manner not specified in this manual

・Any malfunction or damage attributable to any cause or causes beyond the

reasonable control of HORIBA, Ltd. such as natural disasters

・Any deterioration in appearance attributable to corrosion, rust, and so on

・Replacement of consumables

HORIBA, LTD. SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM ANY

MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA, OR ANY OTHER

USES OF THE PRODUCT.

■Trademarks

・Microsoft, Windows, Windows Vista are registered trademarks or trademarks of

Microsoft Corporation in the United States and other countries.

Other company names and brand names are either registered trademarks or trademarks

of the respective companies. (R), (TM) symbols may be omitted in this manual.

CODE:GZ0000333606A

September, 2013 　　2013 HORIBA, Ltd.

Check items

■Items in package

After opening the package, check for damage on the instrument and that the standard

accessories (see below) all exist.

If damage or defects are found on the product, contact your dealer.

Note

・The accessories are not waterproof.

・The supplied alkaline batteries are used to check operation, thus it is possible that the

battery will be run out quickly.

Instrument Instruction manual

(this book)

Quick-start Manual AAA alkaline batteries

Regulations

III

■Conformable directive

This equipment conforms to the following directives and standards:

●Installation environment

This product is designed for the following environment.

・Overvoltage Category II

・Pollution degree 2

WARNING: Do not use the equipment for measurements within measurement

categories II, III and IV.

●Information on disposal of electrical and electronic

equipment and disposal of batteries and accumulators

The crossed out wheeled bin symbol with underbar shown on the product or

accompanying documents indicates the product requires appropriate treatment,

collection and recycle for waste electrical and electronic equipment (WEEE) under the

Directive 2002/96/EC, and/or waste batteries and accumulators under the Directive

2006/66/EC in the European Union.

The symbol might be put with one of the chemical symbols below. In this case, it satisfies

the requirements of the Directive 2006/66/EC for the object chemical.

This product should not be disposed of as unsorted household waste.

Your correct disposal of WEEE, waste batteries and accumulators will contribute to

reducing wasteful consumption of natural resources, and protecting human health and

the environment from potential negative effects caused by hazardous substance in

products.

Contact your supplier for information on applicable disposal methods.

Directives: The EMC Directive 2004/108/EC

The Low Voltage Directive 2006/95/EC

The RoHS Directive 2011/65/EU

Standards: [the EMC Directive] EN61326-1:2006

Class B, Basic requirements

[the Low Voltage Directive] EN61010-1:2010(Ed.3.0)

[the RoHS Directive] EN50581:2012

Category: 9. Monitoring and control instruments

Regulations

■FCC rules

Any changes or modifications not expressly approved by the party responsible for

compliance shall void the user's authority to operate the equipment.

●WARNING

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

■Korea certification

●

■Taiwan battery recycling mark

For your safety

■Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and

follow the instructions carefully.

●Hazard classification

●Warning symbols

This indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury. This is to

be limited to the most extreme situations.

This indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury. It may

also be used to alert against unsafe practices.

Without safety alert indication of hazardous situation

which, if not avoided, could result in property damage.

Description of what should be done, or what should be followed

Description of what should never be done, or what is prohibited

For your safety

■Safety precautions

This section provides precautions for using the product safely and correctly and to

prevent injury and damage. The terms of DANGER, WARNING, and CAUTION indicate

the degree of imminency and hazardous situation. Read the precautions carefully as it

contains important safety messages.

●Instrument and electrode

WARNING

Do not use an unspecified AC adapter.

Otherwise, it may heat up or be ignited resulting in a fire or an accident.

Do not disassemble or modify the instrument.

Otherwise, it may heat up or be ignited resulting in a fire or an accident.

CAUTION

Harmful chemicals

Some ion electrodes are used with hazardous standard solutions. Handle

them with care. If the internal solution comes in contact with the skin, wash it

off immediately. If it gets into the eyes, flush with plenty of water and then

consult a doctor.

Harmful chemicals

The internal solution of pH electrode is highly concentrated potassium

chloride (3.33 mol/L KCl). If the internal solution comes in contact with the

skin, wash it off immediately. If it gets into the eyes, flush with plenty of water

and then consult a doctor.

Broken glass

Broken glass may cause injury. The outer tube and tip of an electrode are

made of glass. Handle them with care.

Do not use the RS-232C communication and the AC adapter under wet or

humid conditions. Otherwise, it may cause a fire, electric shock, or

breakage.

For your safety

VII

●Battery

WARNING

Keep batteries out of reach of children. If someone accidentally swallows a

battery, consult a doctor immediately.

If alkaline fluid from a battery gets into the eyes, do not rub the eyes, rinse

with clean water immediately and then consult a doctor.

Contact with alkaline fluid could cause blindness.

Do not put batteries in a fire, expose to heat, disassemble or remodel.

Doing so could case fluid leakage, overheating or explosion.

CAUTION

Do not remove or scratch the external label of the battery.

Doing so could cause injury to hands and fingers.

For your safety

VIII

■Product handling information

●Operational precautions (instrument)

・Do not drop, crash, or give any physical impact on the instrument.

・The instrument is made of solvent-resistant materials but that does not mean it is

resistant to all chemicals. Do not dip the instrument in strong acid or alkali solution, or

wipe with such solution.

・If the instrument is dropped into water or gets wet, wipe it using soft cloth. Do not heat

to dry it with a hair-dryer (or the like).

・The instrument has a dust-proof and waterproof structure. Waterproof performance is

following specification: the instrument does not malfunction even when immersed in

water of 1 m depth for 30 minutes.

This does not mean to guarantee non-destructive, trouble-free, dust-proof, and

waterproof performance in all situations. If the instrument is correctly handled

according to the descriptions in this manual, the instrument provides dust-proof and

waterproof performance.

・When replacing the batteries, while connected to the AC adapter, or during the RS-

232C communication, the instrument does not have the dust-proof and waterproof

performance. The dust-proof and waterproof performance is maintained only when the

covers are attached correctly.

・After replacing the batteries, connecting the AC adapter, and using the RS-232C

communication, make sure that the waterproof packing attached to each cover is not

deformed or discolored, or has foreign matter adhering to it. If the waterproof packing

is deformed, discolored or has foreign matter adhering to it, or dust could get inside,

water leaks could occur that could lead to instrument malfunction.

・To disconnect an electrode or AC adapter cable or serial cable, hold the connector

and pull it off. If you pull at the cable, it may cause a breakage.

・The RS-232C communication between the instrument and a personal computer (PC)

may fail because of environmental conditions, such as (radio/electromagnetic) noise.

・Do not replace the batteries, connect the AC adapter, or use the RS-232C

communication in a dusty place or with wet hands. Dust or moisture could get inside

the instrument, possibly causing instrument malfunction.

・Do not use the tip of a nail or an object with a sharp end to press the keys.

・If the power supply is interrupted while measurement data is being saved in the

instrument, the data could be corrupted.

・A NiMH rechargeable battery can be used in this instrument, but the battery used in

the instrument cannot be charged using the AC adapter.

Otros manuales para D-73

Tabla de contenidos

Otros manuales de Instrumento de medición de horiba

horiba

horiba F-70 Series Manual de usuario

horiba

horiba D-73 Guía de instalación

horiba

horiba 9680-10D Manual de usuario

horiba

horiba DO Tip Manual de usuario

horiba

horiba Laqua Act ES-71 Guía de instalación

horiba

horiba 9551-20D Manual de usuario

horiba

horiba 9551-20D Manual de usuario

horiba

horiba OCMA-500 Manual de usuario

horiba

horiba 5002S-10C Manual de usuario

horiba

horiba 9615S-10D Manual de usuario

horiba

horiba HU-200TB SS-120 Manual de usuario

horiba

horiba LAQUAact D-74 Guía de instalación

horiba

horiba LAQUAtwin LAQUAtwin-Salt-11 Manual de usuario

horiba

horiba LAQUA-PC1100 Manual de usuario

horiba

horiba U-50FC Manual de usuario

horiba

horiba Phosphorimeter Trigger Instrucciones de instalación y funcionamiento

horiba

horiba HEMAPREP RAB316AEN Manual de usuario

horiba

horiba 3551-10D Manual de usuario

horiba

horiba CFO-ONE Manual de usuario

horiba

horiba 9678-10D Manual de usuario

horiba

horiba ENDA-5000 Manual de usuario

horiba

horiba OPSA-150 Manual de usuario

horiba

horiba IG-320 Manual de usuario

horiba

horiba IG-340 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

horiba D-73 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas