Honeywell ST 3000 Instrucciones de instalación y funcionamiento
04/03 34-ST-99-20 (Addendum to 33-ST-25-17A) 1 of 6
ST 3000 Smart Transmitter
Release 300 with HART®Communications
Option
34-ST-99-20
04/03
Addendum
(to User Manual
34-ST-25-17A)
Overview Replacement Meterbody and Heads for Model STD 110
The ST 3000 Pressure Transmitter (Model STD110) is now being shipped with newly
designed meter body and process heads. If a replacement meter body is needed, it
should be ordered from the Model Number stated on the meter body nameplate. This
meter body replacement number will start with STD110S-xxx...
This new transmitter is functionally identical to previous models, with the same
specifications and intended applications (Draft Range: 10” H2O [25 mbar]).
The new version, which will continue as Model STD110, differs only in the physical
size and form of the meter body, process head, and associated components.
With exceptions noted in this addendum, information given in User’s Manual
34-ST-25-17A applies also to this newer design.
Installation, operation, maintenance, calibration, and troubleshooting tasks remain
virtually the same as for the previous version. Differences appear primarily in torque
specifications when replacing meter bodies, and in part numbering and part
recognition when replacing components or assemblies.
Related
Publications
This addendum provides details for parts replacement that span a variety of
applications of the Model STD110. For applicability of parts for specific options
available for the newer design of the Model STD110, refer to:
For availability and applicability of parts, refer to:
ST 3000 Smart Transmitter
Series 100 Differential Pressure Models
Specification and Model Selection Guide
34-ST-03-60
2 of 6 34-ST-99-20 (Addendum to 33-ST-25-17A) 04/03
Additions to the
User Manual The additions to User Manual 34-ST-25-17A that relate to the newly designed meter
body and process heads are given in Table 1 of this addendum.
Use the information in Table 1 to reference and annotate your User Manual.
Table 1 – Additions to the User Manual
Page # in User
Manual
Sub-Section Description of Change
32 4 – Installation - Piping ST 3000
Transmitter
Table 13 Installing Flange
Adapter
In Step 5, do not use the torque specification of 47.5
to 54 N∙m (35 to 40 lb-ft).
Instead, torque Flange Adapter bolts evenly to
47,5 N·m +/- 2,4 N·m (35 Lb-Ft +/- 1.8 Lb-Ft).
98-100 9 - Maintenance - Inspecting and
Cleaning Barrier Diaphragms
Table 41 Inspecting and
Cleaning Barrier Diaphragms
Table 42 Process Head Bolt
Torque Ratings
In Step 8 of Table 41, do not use specifications for
head torque given in Table 42. Instead, torque head
bolts/nuts to the following specifications.
20,3 N·m ± 1 N·m (15.0 Lb-Ft ± 0.8 Lb-Ft)
103-105 9 - Maintenance Replacing Meter
Body
Table 44 Replacing Meter Body
Only
In Step 9, the reference to Table 42 for torquing
head bolts/nuts should be
20,3 N·m ± 1 N·m (15.0 Lb-Ft ± 0.8 Lb-Ft)
123-125 9 - Parts List – Replacement
Parts
Figure 44 Series 100 and Series
900 DP Meter Body for Models
STD924 & STD930 C, D, G, H,
K, and L STD974
Table 55 Parts Identification
for callouts in Figure 44.
Figure 44 illustrates the replacement parts available
for the previous style of the Model STD110
Transmitter, and Table 55 provides part numbers and
descriptions for the parts called out in Figure 44.
For the new style, use Figure 1 of this addendum to
locate replacement parts, and use Table 2 of this
addendum for part numbers and descriptions.
For applicability of parts, refer to:
ST 3000 Smart Transmitter
Series 100 Differential Pressure Models
Specification and Model Selection Guide
34-ST-03-60
04/03 34-ST-99-20 (Addendum to 33-ST-25-17A) 3 of 6
Figure 1 ST 3000 Model STD110 (Revision S or greater)
4 of 6 34-ST-99-20 (Addendum to 33-ST-25-17A) 04/03
Table 1 Parts Identification for Callouts in Figure 1
Key
No.
Part Number Description Qty/
Unit
1Specify complete
model number from
nameplate plus R300
Series 100 replacement meter body without heads 1
Specify complete
model number from
nameplate plus R300
Series 900 replacement meter body without heads 1
Kc
K4
K8
51452866-001
51452866-002
51452866-003
51452866-004
································
································
································
Bolts and Nuts Kit, Carbon Steel
Bolts SS (NACE) and Nuts, 302/304 SS (NACE) Kit
Bolts SS (non-NACE) and Nuts SS (NACE) Kit
Bolts B7M and Nuts B7M Kit
Each Bolts and Nuts Kit includes:
Bolt, Hex head, 7/16-20 UNF, 1.50 Inches long (Flange Adapter)········
Nut, Hex, 7/16 UNC (Process Head)····················································
Bolt, Hex Head, 7/16 UNC X 3.25 inches long (Process Head)············
4
4
4
K1
K2
K3
30753785-001
30753787-001
30753786-001
································
································
································
Drain and Plug Kit, stainless steel
Drain and Plug Kit, Monel
Drain and Plug Kit, Hastelloy C
Each Drain and Plug Kit includes:
Pipe Plug ····················································································
Vent Plug ·····························································································
Vent Bushing ·······················································································
4
2
2
K6
Ka
K7
51452865-001
51452865-002
·································
·································
·································
Meterbody Gasket Kit (PTFE Material); Kit includes:
Meterbody Gasket Kit (Viton Material); Kit includes:
Gasket, Process Head ·········································································
Gasket, Flange Adapter ·······································································
O-Ring, Meterbody to Electronics Housing ··········································
6
6
3
K6
K6
51452868-001
51452868-002
Gasket only, Process Head (12 PTFE Gaskets/pack)
Gasket only, Process Head (6 Viton Head O-Rings)
12
6
Ka
Ka
51452868-004
51452868-005
Gasket only, Flange Adapter, 6 PTFE Adapter Gaskets
Gasket only, Flange Adapter, 6 VITON Adapter O-Rings
6
6
04/03 34-ST-99-20 (Addendum to 33-ST-25-17A) 5 of 6
Table 2 Flange Adapter Kits
Key
No.
Part Number Description Quantity
Per Unit
Ka
Kb
Kc
51452867-110
51452867-210
51452867-310
51452867-410
51452867-150
51452867-350
51452867-450
51452867-130
51452867-330
51452867-430
···································
···································
···································
Flange Adapter Kit, with:
SS Flange Adapters and with carbon steel bolts
SS Flange Adapters and with SS (NACE) bolts
SS Flange Adapters and with SS (non-NACE) bolts
SS Flange Adapters and with B7M alloy steel bolts
Monel Flange Adapters and with carbon steel bolts
Monel Flange Adapters and with SS (non-NACE)bolts
Monel Flange Adapters and with B7M alloy steel bolts
Hastelloy C Flange Adapters and with carbon steel bolts
Hastelloy C Flange Adapters and with SS (non-NACE) bolts
Hastelloy C Flange Adapters and with B7M alloy steel bolts
Each Flange Adapter Kit includes:
Gasket, Flange Adapter ································································
Flange Adapter ··············································································
Bolt, hex head, 7/16-20 UNF, 1.50 inches long, Flange Adapter ··
2
2
4
Ka
Kb
Kc
51452867-100
51452867-200
51452867-300
51452867-400
···································
···································
···································
SS Blind Flange Adapter Kit, with Carbon Steel bolts
SS Blind Flange Adapter Kit, with SS (NACE) bolts
SS Blind Flange Adapter Kit, with SS (non-NACE) bolts
SS Blind Flange Adapters and B7M alloy steel bolts
Blind Flange Adapter Kit includes:
Gasket, Flange Adapter ································································
Flange Adapter ··············································································
Bolt, hex head, 7/16-20 UNF, 1.50 inches long, Flange Adapter ··
2
2
4
6 of 6 34-ST-99-20 (Addendum to 33-ST-25-17A) 04/03
Table 3 Process Head Assembly Kits
Key
No Part Number Description Quantity
Per Unit
K1
K2
K3
K5
K6
Ka
51452864-032
51452864-012
51452864-022
51452864-042
51452864-010
51452864-020
51452864-132
51452864-112
51452864-122
51452864-142
51452864-110
51452864-120
···································
···································
···································
···································
···································
···································
Process Head Assembly Kit, with PTFE Gasket and with:
Hastelloy C head with side vent/drain
Carbon steel head with side vent/drain
Stainless steel head with side vent/drain
Monel head with side vent/drain
Carbon steel head without side vent/drain
Stainless steel head without side vent/drain
Process Head Assembly Kit, with VITON Gasket and with:
Hastelloy C head with side vent/drain
Carbon steel head with side vent/drain
SS head with side vent/drain
Monel Head with side vent/drain
Carbon Steel Head without side vent/drain
Stainless Steel Head without side vent/drain
Each Process head Assembly Kit includes:
Pipe Plug (See Note.)···································································
Vent Plug (See Note.)············· ·····················································
Vent Bushing (See Note.)·····························································
Process Head ··············································································
Gasket (PTFE), Process Head ····················································
Gasket (PTFE), Flange Adapter···················································
NOTE: This item is made of the same material as the
Process Heads, except for Kits with carbon steel Process
Heads, which include stainless steel Pipe Plug, Vent Plug,
and Vent Bushing.
2
1
1
1
1
1
Tabla de contenidos
Otros manuales de Transmisor de Honeywell
Honeywell
Honeywell HVB16TPTX Manual de usuario
Honeywell
Honeywell MCE 2 Manual de usuario
Honeywell
Honeywell 5819AP Instrucciones de montaje
Honeywell
Honeywell SMV 3000 Manual de usuario
Honeywell
Honeywell XNX Manual de usuario
Honeywell
Honeywell 5800Micra - Single Door/window Transmitter Manual de usuario
Honeywell
Honeywell Ademco 5804AP Manual de usuario
Honeywell
Honeywell STT750 SmartLine Manual de instrucciones
Honeywell
Honeywell Ademco 5817CBXT Instrucciones de montaje
Honeywell
Honeywell 5878 Instrucciones de montaje
Honeywell
Honeywell 5817CBXT Manual de usuario
Honeywell
Honeywell STT850 SMARTLINE Manual de usuario
Honeywell
Honeywell ADEMCO 5804-2 Manual de usuario
Honeywell
Honeywell XNX Universal Transmitter Manual de usuario
Honeywell
Honeywell SmartLine SLG 700 Manual de usuario
Honeywell
Honeywell 5820L - Slim Line Wireless Door/Window... Instrucciones de montaje
Honeywell
Honeywell ST 800 Series Manual de usuario
Honeywell
Honeywell 5834-4 Series Instrucciones de montaje
Honeywell
Honeywell ST 3000 Manual de usuario
Honeywell
Honeywell STT700 STT700 Manual de usuario
Manuales populares de Transmisor de otras marcas
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
MG
MG 10JRE Manual de usuario
