Honeywell SmartEye Transmitter Manual de usuario

7157 602 EN1B-0003UK07 0402

SmartEye

Transmitter

Installation Instructions

Contents

EN1B-0003UK07 0402

Contents

Contents 1

Overview 2

Mounting 4

Glossary 13

Technical data 14

Troubleshooting 15

Overview

For your information

Technical terms are identified by an * and are explained in the

glossary.

Application

− The SmartEye Transmitter is part of the SmartEye System* for

wireless temperature monitoring applications.

− It is a stand-alone battery operated device that measures the

temperature of a wired temperature probe e.g. in a food mobile

casecabinet.

− It sends the temperature & digital input* information to a

SmartEye Receiver* within the building.

− It monitors the state of a digital input that can be used for

applications e.g. defrost inhibit to prevent over-temperature

alarms during defrost cycle.

− SmartEye Transmitters should not be confused with Hometronic

HB30 weathersensor range.

The measured data* is transferred by radio to the SmartEye

Receiver*. This data is used by the rest of the SmartEye system* to

log temperature.

Overview

EN1B-0003UK07 0402

Delivery Includes

(1) SmartEye Transmitter

(2) Mounting bracket

(3) 2 battery cells AA 1.5V,

type LR6 (mignon)

e.g. Energiser LR6 or

Energizer HI Energy Lithium

(longer life span)

(4) Temperature probe cable

assembly. (Not shown)

(5) TP002K temperature probe.

(Not shown)

Mounting

Safety instructions

Caution!

The SmartEye Transmitter has a radio transmitter

whose function can be impaired by metallic objects or

radio devices.

- When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio

devices.

- Select a different mounting site if radio interference

occurs.

Information on mounting the SmartEye Transmitter

Best results are achieved when all devices are mounted at a height

where clear RF paths are uninhibited by metal objects.

When selecting the mounting site, ensure that:

− Avoid metal objects directly in the path between SmartEye

Transmitter and the SmartEye Receiver.

− Transmitters and Receivers mounted at height will have RF

communication less impaired by floor objects.

Mounting

EN1B-0003UK07 0402

- Mount Transmitter with the back plate facing away from Receiver.

- Mount Receiver vertically i.e. antenna pointing up or down

− Mount Transmitter so that it is easily accessible for Teach-In* and

batterychange

Information on temperature sensor & digital input

Temperature Sensor

Only the approved Temperature sensor (TP002K) may be used. A

non-approved Temperature sensor will result in incorrect

temperature readings.

Digital Input

Refer to installation guide of SmartEye Genus Interface for

configuration of Digital Input. If configured as defrost inhibit, connect

the Digital Input to NO contacts of a relay activated during the

defrost cycle. This will prevent over-temperature alarms during

defrost.

The Digital Input and Common Ground (refer to page 8) must be

wired to voltage-free relay contacts. Closed contacts activate the

input. If the input is left unterminated it will default to a clear state.

Mounting

Therefore, if the digital input is not required, it can be left

unterminated.

Teach-In Button

Accessing the Teach-In button requires the removal of the battery

lid. This button is located next to the cable assembly socket and is

used during the Teach-In process in the commissioning stage of the

system.

Mounting the SmartEye Transmitter

1. Securing the mounting bracket

The metallic mounting bracket snaps onto the back of the

Transmitter.

When mounting the unit, ensure that the horizontal screw

hole of the mounting bracket is positioned at the top.

Mounting

EN1B-0003UK07 0402

- Select a suitable mounting site.

- Use suitable fasteners to secure the mounting

bracket firmly to the mounting surface.

2. Battery Insertion

- Remove the SmartEye Transmitter

from the mounting bracket.

- Open the battery compartment:

–Press in the battery lid.

–Pull up the housing frame.

–Remove the battery lid.

- Remove the used battery cells, if

necessary.

- Dispose of used battery cells in conformance with the local

statutoryrequirements.

Battery cells should not be disposed of in the household

waste.

You may be required by local law to dispose of used battery

Mounting

You may be required by local law to dispose of used battery

cells in a certain manner.

Always replace both battery cells.

Only use 1.5 V AA type LR6(mignon) cells e.g. Energizer LR6

or Energizer HI Energy Lithium (longer life span)

- Insert the battery cells into the battery compartment. Ensure that

the polarity is correct!

- Close the battery compartment and insert the Transmitter into the

mounting bracket.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Honeywell

Honeywell

Honeywell XYR 5000 Series Manual de usuario

Honeywell

Honeywell ST 3000 Manual de usuario

Honeywell

Honeywell OELD Manual de usuario

Honeywell

Honeywell SMV800 Manual de usuario

Honeywell

Honeywell 5834 Instrucciones de montaje

Honeywell

Honeywell 5834-4 Series Instrucciones de montaje

Honeywell

Honeywell ADEMCO 5811 Manual de usuario

Honeywell

Honeywell 5816WMBR Manual de usuario

Honeywell

Honeywell STT750 SmartLine Manual de instrucciones

Honeywell

Honeywell SMV800 Manual de instrucciones

Honeywell

Honeywell 5822T Manual de usuario

Honeywell

Honeywell STT750 SmartLine Manual de usuario

Honeywell

Honeywell ST 800 Series Manual de usuario

Honeywell

Honeywell Fema Moduflex F Series Manual

Honeywell

Honeywell STT700 SmartLine Manual de instrucciones

Honeywell

Honeywell STT850 SMARTLINE Manual de usuario

Honeywell

Honeywell oneWireless XYR 6000 Manual de usuario

Honeywell

Honeywell oneWireless XYR 6000 Manual de usuario

Honeywell

Honeywell TCC800MS Manual de usuario

Honeywell

Honeywell Ademco 5811 Manual de usuario

Honeywell

Honeywell ST 3000 Manual de usuario

Honeywell

Honeywell SmartLine Manual de usuario

Honeywell

Honeywell APT2000 Series Manual de usuario

Honeywell

Honeywell ADEMCO 5804 Instrucciones de montaje

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario

Excalibur

Excalibur SoundMaster FM Transmitter 144 Manual de usuario