Honeywell RTH6500WF Wi-Fi Series Manual de usuario

User Guide

Read and save these

instructions.

For help please visit

honeywellhome.com/support

RTH6500WF

Smart Series

RTH6580WF1001

RTH6585R1006

Programmable

Thermostat

HOLD

M37771

In the box you will find

• Thermostat

• Wallplate (attached to

thermostat)

• Screws and anchors

• Thermostat literature

• Thermostat ID Card

• Wire labels

• Quick Reference Card

Find rebates: HoneywellHome.com/Rebates

Input: 24 V~ @ 60 Hz, 1.0 A

69-2715EF—07 ii

This thermostat works with common 24 V systems such as forced air, hydronic, heat pump, oil, gas, and

electric. It will not work with millivolt systems, such as a gas fireplace, or with 120 V/240 V systems

such as baseboard electric heat.

MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a

sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1800

2388192 for information on how and where to properly and safely dispose of your old thermostat.

CAUTION: ELECTRONIC WASTE NOTICE: The product should not be disposed of with

other household waste. Check for the nearest authorized collection centers or authorized recyclers. The

correct disposal of end-of-life equipment will help prevent potential negative consequences for the

environment and human health.

NOTICE:To avoid possible compressor damage, do not run air conditioner if the outside temperature

drops below 50 °F (10 °C).

FCC statement available at

https://customer.resideo.com/enUS/support/residential/codes-and-standards/FCC15105/Pages/default.aspx

Need help?

Visit honeywellhome.com/support for assistance before returning the thermostat to

the store.

Welcome

Precautions and Warnings

Congratulations on your purchase of a Smart

programmable thermostat. When registered

to Total Connect Comfort, you can remotely

monitor and control the heating and cooling

system in your home or business—you can

stay connected to your comfort system

wherever you go.

Total Connect Comfort is the perfect solution

if you travel frequently, own a vacation

home, a business or manage an Investment

property or if you are simply looking for peace

of mind.

69-2715EF—07 1

About your new thermostat

Controls and Home screen

quick reference....................................................... 2

Preset energy-saving schedules................... 2

Installation

Installing your thermostat ................................ 3

Connecting to your WiFi network............. 10

Registering your thermostat online.......... 12

Operation

Setting the clock................................................. 14

Setting the fan ..................................................... 14

Selecting system mode................................... 14

Adjusting program schedules...................... 15

Overriding schedules temporarily ............. 15

Overriding schedules permanently........... 15

Unregistering thermostat .............................. 16

Disconnecting WiFi......................................... 16

Special features................................................... 17

Setting functions and options..................... 18

Appendices

Frequently asked questions.......................... 20

Troubleshooting.................................................. 21

Limited warranty................................................. 24

Table of contents

Features of your thermostat

With your new thermostat, you can:

• Connect to the Internet to monitor and control your heating/cooling system

• View and change your heating/cooling system settings

• View and set temperature and schedules

• Receive alerts via email and get automatic upgrades

Your new thermostat provides:

• Smart Response Technology

• Compressor protection

• Heat/cool auto changeover

69-2715EF—07 2

Controls and home screen quick reference

Once your thermostat is installed, it will display the home screen. Portions of this

display will change depending on how you are viewing it.

The screen lights when you press any button. It stays lit for 8 seconds after you

complete changes.

M31586

HOLD

Set up messages

describe steps in the

WiFi set up process

WiFi status

Set clock, day,

or schedule

Select fan

settings

Additional

settings

Temperature

adjustment buttons

Permanent override

button

Select system

mode

Preset energy-saving schedules

This thermostat is pre-set with energy-saving program settings for four time periods.

Using the default settings can reduce your heating/cooling expenses if used as

directed. Savings may vary depending on geographic region and usage. To change the

settings, see pages 15.

Default Heat Settings Default Cool Settings

WAKE

6:00 am 70 °78 °

LEAVE

8:00 am 62 °85 °

RETURN

6:00 pm 70 °78 °

SLEEP

10:00 pm 62 °82 °

3 69-2715EF—07

Setting up your thermostat

Setting up your programmable thermostat is easy. It is preprogrammed and ready to go

as soon as it is installed and registered.

Install your thermostat.

Connect your home WiFi network.

Before you begin, you may want to watch a brief installation video. Use

the QR Code®at the front of this guide, or go to

honeywellhome.com/support

Installing your thermostat

You might need the following tools to install this thermostat:

• No. 2 Phillips screwdriver

• Small pocket screwdriver

• Pencil

• Level (optional)

• Drill and bits (3/16” for drywall,

7/32” for plaster) (optional)

• Hammer (optional)

• Electrical tape (optional)

1 Switch OFF power to your

heating/cooling system.

Important! To protect your

equipment, switch OFF the power to

your heating/cooling system at the

breaker box or the system switch.

M31535

Circuit breaker

box

Heating/cooling

system power

switch

69-2715EF—07 4

MCR33823

If you have an older thermostat with

a sealed mercury tube, turn to page

ii for proper disposal instructions.

Terminal

designation

Installing your thermostat

2 Remove old thermostat faceplate

and leave wires connected.

2a Take a picture of the wire

connections for later reference.

2b If no wire is connected to a

terminal labeled C or no C terminal

exists on the old thermostat, view

the Alternate Wiring videos at

honeywellhome.com/support

Important! C wire is required and

is the primary power source for your

thermostat. Without a C wire, your

thermostat will not power up.

3 Label wires.

Do not label by wire color. Use

the supplied sticky tags to label

each wire as you disconnect it.

Label wires according to the old

thermostat terminal designations,

not by wire color.

Note: If no tag matches a wire

terminal label, write the terminal

label on a blank tag.

4 Remove wallplate.

Remove the old wallplate from

the wall after all wires have been

labeled and disconnected.

Blank sticky

tags

Sticky tags

Terminal

designation

MCR31537

5 Separate thermostat and its

wallplate.

On your new thermostat, grasp the

finger holds on the top and bottom

of the wallplate with one hand and

the thermostat (front) with the other

hand. Pull pieces apart.

Thermostat

Wallplate (back view)

Finger holds

M33856

PULL HERE

TO REMOVE

PULL HERE

TO REMOVE

5 69-2715EF—07

Installing your thermostat

6 Mount wallplate for thermostat.

Mount your new wallplate using screws and

anchors included with the thermostat.

If necessary:

Drill 3/16-in holes for drywall.

Drill 7/32-in holes for plaster.

Note: You may be able to use your existing

wall anchors. Hold the wallplate up to the

existing anchors to check for alignment.

Wallplate

Important! The thermostat requires a C wire to operate. The C, or common, wire

brings 24 VAC power to the thermostat. Many older mechanical or battery operated

thermostats do not require a C wire. If you don’t have a C wire, try:

• Looking for an unused wire that is pushed into the wall. Connect that wire to C and

check that it is connected to the 24 VAC common at your heating/cooling system.

Note: Not all heating/cooling systems label the 24 VAC common C. Check your system

manual or contact the manufacturer to find out which terminal is the 24 VAC common.

View the Alternate Wiring videos at honeywellhome.com/support

Wiring

For conventional heating/cooling systems (natural gas, oil or electric furnace, air

conditioner), see page 5. See “Glossary” on page 23 for further definition.

For a heat pump system, see page 7. See “Glossary” on page 23 for further

definition.

MCR33857

Wiring (conventional system)

7A Wire the thermostat to your conventional system.

a Starting with the C Wire, match the sticky tag on

the wire to the terminal labels.

You must have a C wire.

b Loosen screw, insert wire on inside edge

of terminal, then tighten screw.

c Verify wire is firmly secured by gently

pulling on wire.

d Repeat steps a–c for all other wires.

e Push any excess wire back into the wall

opening after all wires are installed.

f Continue to page 8.

Labels don’t match? See alternate

wiring key on pages 6.

W2 GWYR RCK Y2 C

MCR33878

HEAT PUMP

CONVENTIONAL

AUX/EGO/B YRRCK LC

Remove metal jumper

only if you have both R

and RC wires

Note: The wiring for your

application might be different

from the wiring shown above.

69-2715EF—07 6

Installing your thermostat

Wiring (heat pump system only)

7B Wire thermostat to your heat pump.

a Starting with the C Wire, match the sticky tag on the wire to the terminal

labels.

You must have a C wire.

b Loosen screw, insert wire on inside edge

of terminal, then tighten screw.

c Verify wire is firmly secured by gently

pulling on wire.

d Repeat steps a–c for all other wires.

e Push any excess wire back into the wall

opening after all wires are installed.

Continue to page 8.

Note: If old thermostat has separate wires on AUX and

E, place both wires into the E/AUX terminal.

If old thermostat has wire on AUX with a jumper to E,

place wire on E/AUX terminal. No jumper is required.

Labels don’t match? See alternate

wiring key on pages 7.

MCR33877

HEAT PUMP

AUX/EGO/B YRRCK LC

Aux

Note: The wiring for your

application might be

different from the wiring

shown above.

Alternate wiring (conventional system)

Use this if your wire labels don’t match the terminal labels.

Note: You must have

a C wire or equivalent.

Do not use Kterminal. For future use.

If your old thermostat had both Rand RH wires, remove metal jumper.

Connect the Rwire to the RC terminal, and the RH wire to the Rterminal.

Remove metal jumper connecting Rand RC only if you must connect both

Rand RC.

Alternate wiring key (conventional system)

RHY1

RYWG

W2 GWYRRC

Y2 C

MCR33885

CONVENTIONAL

7 69-2715EF—07

Installing your thermostat

Alternate wiring (heat pump system only)

Use this if your wire labels don’t match the terminal labels.

Note: You must have

a C wire or equivalent.

See page 6.

Alternate wiring key (heat pump system only)

Do not use Kterminal. For future use.

If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal.

If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No

jumper is required.

If your old thermostat had an Owire and not a Bwire, attach the Owire to the O/B terminal.

If your old thermostat had separate Oand Bwires, attach the Bwire to the Cterminal. If

another wire is attached to the Cterminal, check honeywellhome.com/support for help.

Attach the Owire to the O/B terminal.

If your old thermostat had separate Y1, W1 and W2 wires, check honeywellhome.com/support

for help.

If your old thermostat had both Vand VR wires, check honeywellhome.com/support for help.

Leave metal jumper between Rand RC terminals in place.

MCR33886

E AUX

XW FH

LOG

VRM

VY1

HEAT PUMP

AUX/EGO/B YRRCK LC

69-2715EF—07 8

Installing your thermostat

8 Insert quick reference card.

Fold quick reference card

along score lines, and slide

it into the slot on the back of

the thermostat.

9 Attach thermostat to wallplate.

Align the thermostat to the

wallplate and then snap into

place.

Back of thermostat

Quick

reference

card

MCR33916

M33860

HOLD

MCR33858

10 Switch heating/cooling system

ON.

Important!

10a Verify that the C wire is

connected at the thermostat

and at the heating/cooling

system.

10b Make sure the heating/

cooling system door is

firmly secured.

10c Switch power back ON

for your heating/cooling

system at the breaker box or

its power switch.

M31544

Circuit

breaker box

Heating/

cooling

system power

switch

Otros manuales para RTH6500WF Wi-Fi Series

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell T8635L Manual de usuario

Honeywell

Honeywell DT90E Manual de usuario

Honeywell

Honeywell T7200D Manual de usuario

Honeywell

Honeywell RTH2510B1000/U Manual de usuario

Honeywell

Honeywell CM907 Manual de usuario

Honeywell

Honeywell t8501A Manual de usuario

Honeywell

Honeywell XE99 series Manual de usuario

Honeywell

Honeywell VisionPRO 8000 Manual de operación

Honeywell

Honeywell RTH8500 Series Manual de usuario

Honeywell

Honeywell INTELLIGUARD 9000 Manual de usuario

Honeywell

Honeywell TH1100DV Manual de usuario

Honeywell

Honeywell Tradeline T8024D Manual de operación

Honeywell

Honeywell Braukmann T104F Manual de usuario

Honeywell

Honeywell Super Tradeline T874G Manual de usuario

Honeywell

Honeywell CMT707 Manual de usuario

Honeywell

Honeywell Q682 Manual de usuario

Honeywell

Honeywell RTHL2510 series Manual de usuario

Honeywell

Honeywell RTH230B - 5-2 Day Programmable Thermostat Manual de usuario

Honeywell

Honeywell Y9520Z Sundial RF2 Pack 5 Manual de usuario

Honeywell

Honeywell CT1800 Manual de usuario

Honeywell

Honeywell PROGRAMMABLE THERMOSTAT RTH6350 Manual de usuario

Honeywell

Honeywell Y9520Z Sundial RF2 Pack 5 Manual de usuario

Honeywell

Honeywell PRO 1000 Manual de usuario

Honeywell

Honeywell RTH2510 Series Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario