Honeywell FocusPRO 5000 Series Instrucciones de montaje

678

FocusPRO® 5000

and 6000 Series

Thermostats

INSTALLER SETUP AND

SYSTEM TEST POCKET GUIDE

INSTALLER SYSTEM TESTS

Test the system’s heating, emergency heat, cooling, and fan.

Available tests vary by thermostat and system type.

Table 2. Installer System Test

System Test

Number

Test Type System Status Number

and Description

10 Heating system 0 Heat and fan off

1 First stage heat

on (Fan turns on if

Setup Function 1 is

set to 1, 5, 9, or 10

OR setup Function

3 is set to 1)

2 Second stage heat

3 Third stage heat

20 Emergency

heating system

0 Heat and fan off

1 Heat and fan on

2 Second stage heat

(Aux. heat) turns on

30 Cooling system 0 Compressor and

fan off

1 Compressor and

fan on

2 Second stage

compressor on

40 Fan system 0 Off

1 On

caution

EQUIPMENT DAMAGE HAZARD.

Compressor protection is bypassed during testing.

To prevent equipment damage, avoid cycling the

compressor quickly.

INSTALLER SYSTEM TEST

To begin, press and hold the s and t buttons until the

display changes.

Presss/t to turn system on/off.

Press NEXT to advance to next test.

Press DONE to terminate system test.

Proceed to Installer System Tests on page 8.

To begin, press and hold the s and t buttons until the

display changes.

Presss/t to turn system on/off.

Press NEXT to advance to next test.

Press DONE to terminate system test.

Proceed to Installer System Tests on page 8.

69-2026

10 0

Done Next

10 0

Done Next

FocusPRO®5000 Series

System test System status

number number

FocusPRO®6000 Series

System test System status

number number

2345

Automation and Control Solutions

Honeywell International Inc.

1985 Douglas Drive North

Golden Valley, MN 55422

Honeywell Limited-Honeywell Limitée

35 Dynamic Drive

Toronto, Ontario M1V 4Z9

http://yourhome.honeywell.com

Printed in U.S.A. on recycled

paper containing at least 10%

post-consumer paper fibers.

® U.S. Registered Trademark

US Patent No. 6595430, D509151; other

69-2026 M.S. 09-06

INSTALLER SETUP

To begin, press and hold the sand FAN buttons until

the display changes.

Press s or t to change settings.

Press NEXT to advance to the next function.

Press DONE to exit and save settings.

Proceed to Installer Setup Functions on page 4.

To begin, press and hold the sand FAN buttons until

the display changes.

Press s or t to change settings.

Press NEXT to advance to the next function.

Press DONE to exit and save settings.

Proceed to Installer Setup Functions on page 4.

INSTALLER SETUP FUNCTIONS

Available option and default settings vary by thermostat.

Table 1. Installer Setup

Setup functions Setting & Options

(factory default in bold)

1 System type 0 1 heat / 1 cool Conv.

1 1 heat / 1 cool heat

pump (no Aux. heat)

2 Heat only (2-wire, 3-wire

zone valves [Series 20],

and normally open zone

valves)

3 Heat only with fan

4 Cool only

5 2 heat / 1 cool heat

pump (with Aux. heat)

6 2 heat / 2 cool Conv.

7 2 heat / 1 cool Conv.

8 1 heat / 2 cool Conv.

9 2 heat / 2 cool heat pump

(no Aux. heat)

10 3 heat / 2 cool heat

pump (with Aux. heat)

2 Changeover valve

(O/B terminal)

0 Controls valve in cooling

1 Controls valve in heating

3 Fan control

(heating)

0 Gas/Oil heat (equipment

controls heating fan)

1 Electric furnace (thermo-

stat controls heating fan)

5 First stage heat

cycle rate

5 Gas or oil furnaces of

less than 90%

efciency

1 Steam or gravity

3 Hot water systems or fur-

naces of 90%+ efciency

9 Electric furnaces

[Other options: 1–12]

6 Second stage

heat/Aux heat

cycle rate

5 Gas or oil furnaces of

less than 90% efciency

1 Steam or gravity

3 Hot water systems or fur-

naces of 90%+ efciency

9 Electric furnaces

[Other options: 1–12]

7 Auxiliary heat

cycle rate

5 Gas or oil furnaces of

less than 90% efciency

1 Steam or gravity

3 Hot water systems or fur-

naces of 90%+ efciency

9 Electric furnaces

[Other options: 1–12]

Table 1. Installer Setup

Setup functions Setting & Options

(factory default in bold)

8 Emergency heat

cycle rate

9 Electric emergency heat

1 Steam or gravity

3 Hot water systems or fur-

naces of 90%+ efciency

5 Gas or oil furnaces of

less than 90% efciency

[Other options: 1–12]

9 First stage

compressor cycle

rate

3 Recommended

[Other options: 1–6]

10 Second stage

compressor cycle

rate

3 Recommended

[Other options: 1–6]

12 Manual/Auto

changeover

0 Manual changeover

(Heat/Cool/Off)

1 Auto changeover (Heat/

Cool/Auto/Off)

2 Auto changeover only

(Auto)

13 Adaptive Intel-

ligent RecoveryTM

1 On

0 Off

14 Temperature

display

0 Fahrenheit

1 Celsius

15 Compressor

protection

5 5-minute compressor

off time

[Other options: 0–4

minutes]

16 Schedule format 0 5/2 (weekdays

and weekends

programmable)

1 5/1/1 (weekdays,

Saturday, and Sunday

programmable)

26 Auxiliary heat

control

0 Comfort

1 Economy

27 Heat temperature

range stops

90 Max. heat temperature

setting is 90°F (32°C)

[Other options: 40–89°F

(4.5°C to 32°C)]

28 Cool temperature

range stop

50 Min. cool temperature

setting is 50°F (10°C)

[Other options: 51–99°F

(10.5°C to 37°C)]

Functions 13 and 16 only available on the 6000 series;

function 26 only available on the 5000 series

Done Next

Function Setting

FocusPRO® 6000 Series

Function Setting

FocusPRO®5000 Series

Otros manuales para FocusPRO 5000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell VisionPRO Series Manual de usuario

Honeywell

Honeywell PRO TH1100D Manual de usuario

Honeywell

Honeywell T7200D Manual de operación

Honeywell

Honeywell TP9600 Series Manual de usuario

Honeywell

Honeywell FocusPRO TH5000 Series Manual de usuario

Honeywell

Honeywell TH9320WF5003/U Manual de usuario

Honeywell

Honeywell TH2110DV1008/U Manual de usuario

Honeywell

Honeywell TL8230A Manual de usuario

Honeywell

Honeywell DT92E Manual de usuario

Honeywell

Honeywell TL8230A Manual de usuario

Honeywell

Honeywell Chronotherm T4600 Manual de operación

Honeywell

Honeywell HEAT PUMP THERMOSTAT T8411R Manual de usuario

Honeywell

Honeywell CT3200 series Especificaciones técnicas

Honeywell

Honeywell T7300F Manual de usuario

Honeywell

Honeywell T7100D Manual de operación

Honeywell

Honeywell EConnect TL9160AR Manual de usuario

Honeywell

Honeywell MagicStat CT3300 Especificaciones técnicas

Honeywell

Honeywell RTH221 Series Manual de usuario

Honeywell

Honeywell TP970 Series Manual de usuario

Honeywell

Honeywell TH9000 Series Manual de usuario

Honeywell

Honeywell MagicStat T8132 Manual de usuario

Honeywell

Honeywell TRADELINE T8400C Manual de usuario

Honeywell

Honeywell TH8110R1008/U Manual de usuario

Honeywell

Honeywell DT70 Series Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario