Honeywell Wireless Alarm Bar Manual de usuario

Wireless Alarm Bar Installation Guide

Wireless Alarm BarTM

Rev. B

August 2018

P/N: F08-4007-000

Installation Guide

Wireless Alarm Bar Installation Guide

Product Registration

http://www.raesystems.com/support/product-registration

By registering your product, you can:

•Receive notification of product upgrades or enhancements

•Be alerted to Training classes in your area

•Take advantage of RAE Systems special offers and promotions

Wireless Alarm Bar Installation Guide

Contents

1. General Information.............................................................................................................6

2. Purpose Of This Guide........................................................................................................6

3. Flexible Configurations........................................................................................................7

3.1. Wireless Alarm Bar Mounting.......................................................................................8

3.1.1. Mounting The Wireless Alarm Bar ..........................................................................8

3.1.2. Optional Pole Mounting ..........................................................................................9

3.2. Wireless Alarm Bar Wiring..........................................................................................10

3.2.1. Complete Wireless Alarm Bar Wiring Diagram .....................................................10

3.2.2. Opening The Junction Box ...................................................................................12

3.2.3. Connecting AC Power (Mains) Wiring...................................................................13

3.2.4. Reassembly..........................................................................................................14

3.2.5. External Grounding...............................................................................................14

4. Powering And Programming..............................................................................................15

5. AC-Powered Wireless Alarm Bar Specifications................................................................15

6. DC-Powered Wireless Alarm Bar Specifications................................................................16

Wireless Alarm Bar Installation Guide

IMPORTANT!

Read Before Installing

This Installation Guide is for wiring and installation of the Wireless Alarm Bar only. It must be used in

conjunction with the RAEPoint User’s Guide for safe configuration and operation. The RAEPoint User’s Guide is

available at www.raesystems.com.

WARNINGS

This Manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,

or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in

accordance with the manufacturer’s instructions. The user should understand how to set the correct parameters and

interpret the obtained results.

For safety reasons, this equipment must be operated and serviced by qualified personnel only. Read and

understand the instruction manual completely before operating or servicing.

AVERTISSEMENT

Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé uniquement par un personnel

qualifié. Étudier le manuel d’instructions en entier avant d’utiliser, d’entretenir ou de réparer l’équipement.

Read Before Operating

This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,

or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in

accordance with the manufacturer’s instructions. The user should understand how to set the correct parameters and

interpret the obtained results.

CAUTION!

To reduce the risk of electric shock, turn the power off before opening this instrument or performing service. Never

operate the instrument when the instrument is open. Service this product only in an area known to be non-

hazardous.

Proper Product Disposal At End Of Life

EU Directive 2012/19/EU: Waste Electrical and Electronic Equipment (WEEE)

This symbol indicates that the product must not be disposed of as general industrial or domestic

waste. This product should be disposed of through suitable WEEE disposal facilities. For more

information about disposal of this product, contact your local authority, distributor, or the

manufacturer.

Wireless Alarm Bar Installation Guide

Caution

This device complies with Part 15 of the FCC Rules / Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditionssuivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en

compromettre le fonctionnement.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energyand, if not installed

and used in accordance with the instructions, maycause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference byone or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technicianfor help.

Under Industry Canada regulations, this radio transmittermay only operate using an antenna of a type and

maximum (or lesser) gain approved for the transmitter byIndustry Canada. To reduce potential radio interference to

other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une

antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but

de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type

d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité

nécessaire à l'établissement d'une communication satisfaisante.

Wireless Alarm Bar Installation Guide

1. General Information

As part of a wireless mesh network, the Wireless Alarm Bar communicates with wireless detectors

and controllers and can direct any of its five internal relays to trigger audible and visible alarms.

Remote alarm notifications are critical for many applications where local device alarms are simply

not visible enough or loud enough to alert a wide area. RAEPoint relay settings can be fully

configured wirelessly via the system controller. The Wireless Alarm Bar is suitable for use in

Class I, Division 2, Groups C & D hazardous locations (USA only).

Key Features

•Mounted and pre-wired with two 10J xenon lights and a 112dB horn.

•Five internal SPDT relays

•Wireless transmission distance of 1000 ft (300m) line-of-sight. Range can be extended by using

wireless routers.

•Suitable for use in Class I, Division 2, Groups C & D hazardous locations (USA only)

•LEDs indicate status

Applications

•Oil and gas exploration

•Refineries and petrochemical plants

•Fenceline monitoring

2. Purpose Of This Guide

This guide is designed to provide information on installing and wiring the Wireless Alarm Bar. Refer

to the RAEPoint User’s Guide for testing and operation information (all functions of the RAEPoint

Wireless Alarm Bar are controlled through the RAEPoint that is integrated with the horn and strobe

lights).

Wireless Alarm Bar Installation Guide

3. Flexible Configurations

The Wireless Alarm Bar can be configured for large or small systems, and the network can be

expanded or units removed, depending on the facility or facilities being monitored.

Simple configuration that uses MeshGuard sensors and a Wireless Alarm Bar host:

Full network, including externally controlled devices:

Wireless Alarm Bar Installation Guide

3.1. Wireless Alarm Bar Mounting

Make sure that there is approximately 12" (30 cm) of clearance on all sides of the Wireless Alarm

Bar so that the horn’s sound is not attenuated and to ensure clear view of the two visible alarm

lights.

3.1.1. Mounting The Wireless Alarm Bar

When mounting the RAEPoint on a wall, use heavy-duty steel screws located as indicated below.

Follow these steps:

1. Locate the Wireless Alarm Bar on a wall or other flat surface. Make sure there is at least 12”

(30 cm) of clearance around the unit. Mark the mounting holes’ locations.

2. Remove the Wireless Alarm Bar.

3. Drill pilot holes in the wall or mounting surface.

4. Hold the Wireless Alarm Bar firmly against the wall or mounting surface and insert and tighten

the screws.

The Wireless Alarm Bar is now ready for electrical wiring and testing.

456.0 mm/18″

476.0 mm/18.75″

Wireless Alarm Bar Installation Guide

3.1.2. Optional Pole Mounting

If it is not mounted on a wall or other flat surface, the Wireless Alarm Bar can be attached to a pole

using optional brackets (Part Number 019-2052-000).

Note: The pole must be between 1” (25mm) and 2.5” (63mm) in diameter.

Slip the screws through the two holes that are side by side in order to mount the Wireless Alarm

Bar’s plate to a vertical pole.

Loosely assemble the clamp parts around the pole. Note that the screws have nuts that fit into the

clamp parts. The clamp parts are designed to hold the nut so that you do not need to use a wrench

on this side. Hand-tighten the parts until snug.

Use a hex wrench to tighten the hex screws from the front of the enclosure:

Once the clamp parts and the enclosure are securely held against the pole, stop tightening.

Wireless Alarm Bar Installation Guide

3.2. Wireless Alarm Bar Wiring

The Wireless Alarm Bar already has most wiring done at the factory. It is only necessary to connect

the power supply wires and grounding (according to local requirements). Power and internal

grounding wires must be fed through a connector at the bottom of the unit.

IMPORTANT!

Prior to factory shipment, the RAEPoint is tested. However, the instrument should be tested after

installation.

3.2.1. Complete Wireless Alarm Bar Wiring Diagram

The schematic diagram below shows internal wiring of the Wireless Alarm Bar. Refer to the

diagram on page 13 for power connections.

Note: Thermistors are pre-installed in the Junction Box to protect the relays.

Wires must be fed in

through a 1/2" NPT insert

(UL-certified). Conduit

seals are required within

18″ (45 cm) of conduit

entrances for Group C

hazardous locations.

Tabla de contenidos

Otros manuales de Sistema de seguridad de Honeywell

Honeywell

Honeywell Galaxy Dimension Manual de usuario

Honeywell

Honeywell First Alert FA168CPS Manual de usuario

Honeywell

Honeywell ADEMCO VISTA-20PSIA Manual de usuario

Honeywell

Honeywell VISTA-128FBP Manual de usuario

Honeywell

Honeywell TCPA1BS Manual de usuario

Honeywell

Honeywell LYNX Touch Series Instrucciones de montaje

Honeywell

Honeywell SEF8MS Manual de usuario

Honeywell

Honeywell ADEMCO VISTA-40 Instrucciones de funcionamiento

Honeywell

Honeywell 5800WAVE - Ademco Wireless Siren Instrucciones de montaje

Honeywell

Honeywell ADEMCO VISTA-10P Instrucciones de montaje

Honeywell

Honeywell ADEMCO 5809 Instrucciones de montaje

Honeywell

Honeywell LYNX Touch L5210 Series Instrucciones de montaje

Honeywell

Honeywell Domonial Manual de usuario

Honeywell

Honeywell Lynx Plus Series Manual de usuario

Honeywell

Honeywell LYNX Touch L7000 Series Manual de usuario

Honeywell

Honeywell Ademco Vista-48 series Manual de usuario

Honeywell

Honeywell V4000 Instrucciones de montaje

Honeywell

Honeywell Optiflex Interactive Manual de usuario

Honeywell

Honeywell NOTIFIER DSE3-23 Series Manual de usuario

Honeywell

Honeywell LYNX Touch Security System Manual de usuario

Honeywell

Honeywell Comtronics Smart Homes Manual de usuario

Honeywell

Honeywell INTELLIGUARD 9000 Manual

Honeywell

Honeywell XL4600SM Manual de usuario

Honeywell

Honeywell VISTA-128BPT Instrucciones de funcionamiento

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario