Honeywell HCC334L Manual de usuario
Document G-113077-001 – 02/07 – Rev 3
L-Series
Color Camera
HCC334L HCC334LX
HCC484L HCC484LX
HCC335LX
HCC485LX
User Guide
NTSC PAL
Revisions
Issue Date Revisions
1.00 06/06 New document
1.01 08/06 Added 230V (HCC335LX, HCC485LX).
3 02/07 Updated document part no.; added
warning to p. iii.
Rev 3 ii G-113077-001
02/07
Rev 3 iii G-113077-001
02/07
Warnings
Installation and servicing should be performed only by
qualified and experienced personnel to conform to all local
codes and to maintain your warranty.
WARNING! 12 VDC/24 VAC models require the use
of CSA Certified/UL Listed Class 2
power adapters to ensure compliance
with electrical safety standards.
Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
WEEE (Waste Electrical and Electronic Equipment).
Correct disposal of this product (applicable in the
European Union and other European countries with
separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
Explanation of Graphical
Symbols
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
CAUTION
Rev 3 iv G-113077-001
02/07
FCC Compliance Statement
Information to the User: This equipment has been tested
and found to comply with the limits for a Class A digital
device. Pursuant to Part 15 of the FCC Rules, these limits
are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Manufacturer’s Declaration of
Conformance
The manufacturer declares that the equipment supplied
with this guide is compliant with the essential protection
requirements of the EMC directive 89/336/EEC and the Low
Voltage Directive LVD 73/23 EEC, conforming to the
requirements of standards EN 55013 for emissions.
Rev 3 G-113077-001
02/07
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpack Everything. . . . . . . . . . . . . . . . . . . . . . . . 2
Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Camera Functions . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Up Your Camera . . . . . . . . . . . . . . . . . . . 4
Selecting the Lens . . . . . . . . . . . . . . . . . . . . . . 4
Manual Lens . . . . . . . . . . . . . . . . . . . . . . . 4
Vari-focal Auto Iris Lens . . . . . . . . . . . . . . . 4
Direct Drive (DC) Lens . . . . . . . . . . . . . . . . 4
Video Drive (VSD) Lens. . . . . . . . . . . . . . . 5
Exposure Mode . . . . . . . . . . . . . . . . . . . . . . . . 5
Automatic Exposure Mode . . . . . . . . . . . . .5
Manual Exposure Mode . . . . . . . . . . . . . . 5
Backlight Compensation (BLC). . . . . . . . . . . . 6
Flickerless Mode (FL) . . . . . . . . . . . . . . . . . . . . 6
Automatic Gain Control (AGC) . . . . . . . . . . . . 6
Auto White Balance (AWB) . . . . . . . . . . . . . . . 6
Auto Trace White Balance (ATW) . . . . . . . 6
Auto White Balance Control (AWC). . . . . . 7
One Push Lock . . . . . . . . . . . . . . . . . . . . . . 7
Synchronization Selection (LL/INT) . . . . . . . . . 7
Line Lock Phase Adjustment Potentiometer. . 8
Lens Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the Back Focus . . . . . . . . . . . . . . . . . . . 9
Completing the Installation . . . . . . . . . . . . . . . . . . 11
Mounting the Camera . . . . . . . . . . . . . . . . . . . . . 11
Connecting the Camera . . . . . . . . . . . . . . . . . . . 12
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rev 3 1 G-113077-001
02/07
Introduction
The Honeywell L-Series Color cameras are ideally suited
for use in day-to-day surveillance applications. The L-
Series cameras are designed for exceptional value and
performance for everyday use. Their off-the-shelf feature
set is designed for high picture quality in standard
applications and they require little to no adjustment after
installation.
Figure 1 Camera Overview
Features
• 1/3” CCD
• C/CS adjustable lens mount adapter
• Excellent signal-to-noise ratio of more than 50 dB
• Minimum illumination:
• High Res — 0.4 lux (F1.2, 50 IRE, AGC ON)
• Standard Res — 0.2 lux (F1.2, 50 IRE, AGC ON)
• 2-way Auto Iris: Video Iris (VSD) or Direct Drive (DC)
Iris lens
Lens connector for
Auto Iris lens plug
Setscrew: loosen locking ring
with a Phillips screwdriver to
adjust mounting ring.
C/CS mount adapter:
C mount: turn
counterclockwise
CS mount: turn clockwise
Rev 3 2 G-113077-001
02/07
Before You Begin
Unpack Everything
Check that the items received match those listed on the
order form and packing slip. The L-Series packing box
should include, in addition to this User Guide:
• One L-Series Color camera
• One Auto Iris lens plug
If any parts are missing or damaged, contact the dealer you
purchased the camera from or call Honeywell Customer
Service (see Contact Information on the back of this
manual).
Note You will also require a Phillips screwdriver to
complete the installation.
Please read this guide carefully
before you install the L-Series Color
camera.
Keep this guide for future reference.
Rev 3 3 G-113077-001
02/07
Camera Settings
Camera Functions
Figure 2 Camera Rear View
Legend
#Description
1DIP switches for mode settings (see Figure 3)
2Auto Iris Lens select switch, VSD for Video or DC for Direct
Drive
3Sync select switch
4Video output connector
5Power input connector (24 VAC: 3 terminals)—Low Voltage
model only
6Power LED indicator
7DC Iris level adjustment, for use with DC Iris lens
8V-Phase adjustment, for use with Line lock
9Push Lock in White Balance (WB) mode
10 EEPROM data setting for factory use only
PUSH
LOCK
IR IS
LEVEL
PWR
L/L
IN T
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
VIDEO
~207-253VAC 50HZ
V-P H
PUSH
LOCK
IR IS
LEVEL V-PH
PWR
VIDEO
L/L
IN T
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
GND
DC 12V
AC 24V
2
3
9
1
4
1087
6
5
Low Voltage
(HCC334L/X, HCC484L/X)
Mains 230V —Line Voltage
(HCC335LX, HCC485LX)
9
10 874
6
Rev 3 4 G-113077-001
02/07
Setting Up Your Camera
Figure 3 shows the factory set DIP switch settings.
Automatic Gain Control (AGC) and Auto White Balance
Control (AWC) are set ON.
Figure 3 Factory Set DIP Switch Settings
Selecting the Lens
Manual Lens
Set the EE/ME DIP switch on the rear of the camera (see
Figure 3) to EE. Set the AES/AI switch to AES. EE and AES
are the typical settings.
Vari-focal Auto Iris Lens
Vari-focal Auto Iris lenses (Direct Drive [DC] or Video Drive
[VSD]) are connected to the camera via a 4-pin square
socket located at the side of the camera. Set the AES/AI
DIP switch to AI. EE and AI are the typical settings.
To set a different exposure, see Exposure Mode on page 5.
Direct Drive (DC) Lens
1. Set the VSD/DC switch on the rear of the camera to
DC. Set the AES/AI DIP switch to AI.
EE
AES
OFF
OFF
OFF
OFF
OFF
OFF
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
VSD
DC
IRIS
LEVEL
-+
PUSH
LOCK IR IS
LEVEL V- P H
PWR
VIDEO
L/L
INT
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
GND
DC12V
AC 24V
= ON
= OFF
Rev 3 5 G-113077-001
02/07
2. Slowly turn the LEVEL potentiometer until the picture
on the monitor is as clear as possible and is not too
bright.
Video Drive (VSD) Lens
Set the VSD/DC switch on the rear of the camera (see
Figure 3) to VSD.
Exposure Mode
Automatic Exposure Mode
The Electronic Exposure feature compensates for
excessive light levels by automatically adjusting the shutter
speed of the camera. Set the EE/ME switch to EE
(recommended setting).
Manual Exposure Mode
Set the EE/ME switch to ME. This setting is typically used
only in machine vision applications. The table below gives
the shutter speeds for the switch settings.
Caution Before you adjust the shutter speed, it is
important that you understand how the settings
can affect the scene detail.
Switch Label
Shutter
speed(s)
FL BLC AES/AI
1/50 (PAL)
1/60 (NTSC)
OFF ON OFF
1/100 (PAL)
1/120 (NTSC)
ON ON OFF
1/250 OFF OFF OFF
1/500 ON OFF OFF
1/1000 OFF ON ON
1/2000 ON ON ON
1/4000 OFF OFF ON
1/10000 ON OFF ON
EE
AES
OFF
OFF
OFF
OFF
OFF
OFF
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
= ON
= OFF
LEGEND
Otros manuales para HCC334L
2
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Cámara de seguridad de Honeywell
Honeywell
Honeywell Introduces HCC-745PTW Manual de usuario
Honeywell
Honeywell HCD5HIH Manual de usuario
Honeywell
Honeywell OptiCAM-IR Instrucciones de montaje
Honeywell
Honeywell HDZ402LIWV Manual de usuario
Honeywell
Honeywell HD4U Manual de usuario
Honeywell
Honeywell HD70 Series Manual de usuario
Honeywell
Honeywell Lyric C1 Manual de usuario
Honeywell
Honeywell HWC-S363-RV Manual de usuario
Honeywell
Honeywell HWC-D101 Manual de usuario
Honeywell
Honeywell HD274HD2 Manual de usuario
Honeywell
Honeywell H2D2PR1 Manual de usuario
Honeywell
Honeywell HD3CB Manual de usuario
Honeywell
Honeywell HEICC-2736-WI Manual de usuario
Honeywell
Honeywell Performance H4D3PRV2 Manual de usuario
Honeywell
Honeywell Performance HED1PR3 Manual de usuario
Honeywell
Honeywell CAHBC720PI60V Manual de usuario
Honeywell
Honeywell HBD7S(X) Manual de usuario
Honeywell
Honeywell HD28C4HR6 Manual de usuario
Honeywell
Honeywell HD3C Manual de usuario
Honeywell
Honeywell HBD92S Manual de usuario
