Honeywell ACUIX ES Manual de usuario

Document 800-02848 – Rev C – 03/2009

Installation Guide

ACUIXTM ES

Fixed Camera

Revisions

Issue Date Revisions

A Jan 2009 New document

B Feb 2009 Addition of installation instructions as step 4 regarding the PCB cover; changed

table and figure references to be sequential without a chapter number; note about

the in-ceiling housing template being separate in the box

C Mar 2009 (1) Reorganized sections to improve flow (2) Table 4: 12VDC maximum cable

length values changed (3) smoked lower dome installations: added step and

caution regarding instructions to properly orient the dome correctly over the lens to

ensure maximum illumination (4) Tables 6 and 7; Figure 9: corrections to DIP switch

default settings for white balance and line lock (5) Added figure to step 2 and

updated Figure 10 (6) Table 7: smoke dome minimum illumination - added smoked

dome details

ACUIXTM ES Fixed Camera Installation Guide

Document 800-02848 Rev C 3

03/2009

Explanation of Symbols

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the limits

for a Class B digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference. For example, try orienting or relocating the receiving antenna, increasing

the separation between the equipment and receiver, or connecting the equipment to an

outlet on a different circuit.

WARNING! The exclamation point in a red octagon is a WARNING. Failure to take

or avoid a specific action could result in physical harm to a person

or irreparable damage to equipment.

Caution The lightning flash with arrowhead symbol within an equilateral triangle

alerts the user to the presence of uninsulated dangerous voltage within the

enclosure of the product that may be of sufficient magnitude to

constitute a risk of electric shock to the person.

Caution The exclamation point in a yellow equilateral triangle is a Caution. Failure

to take or avoid a specified action could result in loss of data or damage

to equipment and may contain important operating and maintenance

servicing information.

Canadian Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Manufacturer’s Declaration of Conformance

North America

The equipment supplied with this guide conforms to UL60065, CAN/CSA C22.2 No.

60065-03.

Europe

The manufacturer declares that the equipment supplied with this guide is compliant with the

essential protection requirements of the EMC directive 2004/108/EC and the Low Voltage

Directive LVD 2006/95/EC, conforming to the requirements of standards EN 55022 for

emissions, EN 50130-4 for immunity, and EN 60065 for Electrical Equipment safety.

Warnings and Cautions

• Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

• Users of the product are responsible for checking and complying with all federal, state

and local laws and statutes concerning the monitoring and recording of video and audio

signals. Honeywell Video Systems shall not be held responsible for the use of this product

in violation of current laws and statutes.

• All installations and servicing must be performed by qualified technical personnel

and must be in accordance with all national and local mechanical and electrical

codes.

• To prevent injury, this apparatus must be securely attached to the wall/ceiling in

accordance with the installation instructions.

• Ensure the mounting surface and installation hardware can hold the combined

weight of the gimbal, housing, lower dome and mount.

• To prevent damage to the camera, follow standard industry precautions for

electrostatic discharge-sensitive devices.

ACUIXTM ES Fixed Camera Installation Guide

Document 800-02848 Rev C 5

03/2009

Important Safety Instructions

BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL

INSTRUCTIONS. AFTER INSTALLATION, retain the safety and operating

instructions for future reference.

1. HEED WARNINGS - Adhere to all warnings on the unit and in the operating

instructions.

2. INSTALLATION

• Do not install in any extremely humid, dusty, hot/cold environments (where the

operating temperature is outside the recommended range of 14°F to 122°F [-10°C

to +50°C]).

• Any wall or ceiling mounting of the product should follow the instructions for the

mount used and use best installation practice appropriate for the structure and

material the mount is being attached to.

• Avoid installing operating or storing the unit close to sources of powerful

electromagnetic radiation, such as radio or TV transmitters or close to fluorescent

lamps or objects reflecting light, or under unstable light sources, which may

cause flickering.

3. POWER SOURCES - This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supplied to your facility, consult your product dealer or local power company.

4. HEAT - Situate away from items that produce heat or are heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers).

5. WATER AND MOISTURE - This product is designed for indoor use only. Do not use

this unit near water or in an unprotected outdoor installation, or any area classified as

a wet location.

6. MOUNTING SYSTEM - Use only with a mounting system recommended by the

manufacturer, or sold with the product.

• Consider using a UPS source to ensure satisfactory performance.

• Using replacement parts or accessories other than the original manufacturers may

invalidate the warranty.

• To make good wire contact and ensure the wire does not short to adjacent wires, fully

insert the wire in the hole on the terminal strip.

• Ensure there are no bare wires touching or faulty operation may occur.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

7. ATTACHMENTS - Do not use attachments not recommended as they may result in

the risk of fire, electric shock, or injury to persons.

8. ACCESSORIES - Only use accessories specified by the manufacturer.

9. CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

10. SERVICING - Do not attempt to service this unit yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

11. REPLACEMENT PARTS - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in fire,

electric shock or other hazards.

Warranty and Service

Subject to the terms and conditions listed on the Product Warranty Card, during the

warranty period Honeywell will repair or replace, at its sole option, free of charge, any

defective products returned prepaid.

In the event you have a problem with any Honeywell Systems Group product, please call

Customer Service for assistance or to request a Return Merchandise Authorization (RMA)

number. Be sure to have the model number, serial number, and the nature of the problem

available for the technical service representative. Prior authorization must be obtained for

all returns, exchanges, or credits. Items shipped to Honeywell without a clearly

identified Return Merchandise Authorization (RMA) number may be refused.

See the back cover for contact details.

The Use of CSA Certified/UL Listed Class 2 power adapters is required to ensure

compliance with electrical safety standards.

WEEE (Waste Electrical and Electronic Equipment). Correct disposal

this product (applicable in the European Union and other European

countries with separate collection systems). This product should be

disposed of, at the end of its useful life, as per applicable local laws,

regulations, and procedures.

ACUIXTM ES Fixed Camera Installation Guide

Document 800-02848 Rev C 7

03/2009

Contents

ACUIX ES Fixed Camera Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Housing and Mount Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Surface Mount or Indoor Pendant Housing and Gimbal Layout . . . . . . . . . . . . . . . . . 10

In-Ceiling Housing and Gimbal Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Cable Requirements and Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the ACUIX ES Fixed Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Step 1: Install the Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Step 2: Connect Video and Power and Adjust Camera Position . . . . . . . . . . . . . . . . 17

Step 3: Set the DIP Switches for Optional Camera Settings . . . . . . . . . . . . . . . . . . . 18

Step 4: Install the PCB Board Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Step 5: Install the Trim Ring or Cover and the Lower Dome . . . . . . . . . . . . . . . . . . . 20

Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Pendant Mount Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ACUIXTM ES Fixed Camera Installation Guide

Document 800-02848 Rev C 9

03/2009

Installing the ACUIXTM ES Fixed Camera

Note Refer to the on-line product library to access up-to-date electronic documents

in PDF format including data sheets, quick references, installation and user

guides, specifications, and product notices.

http://www.honeywellvideo.com/support/literature/index.html

ACUIX ES Fixed Camera Overview

Housing and Mount Options

Note PAL and NTSC video formats are based on camera model.

Figure 1 ACUIX ES Fixed Camera Housing and Mount Options

Surface mount

using the skirt

Indoor pendant

using the top cap

Pendant wall mount In-ceiling

Pendant

ceiling

mount

Installing the ACUIXTM ES Fixed Camera

Surface Mount or Indoor Pendant Housing and Gimbal Layout

Figure 2 Surface or Pendant Mount Layout (Top View)

Table 1 ACUIX ES Fixed Dome Models

Housing Camera and Communication Lower dome* NTSC Model PAL Model

Surface

mount/indoor

pendant

2.8 - 10mm VFAI camera,

video over coax

smoked lower dome HDV1NSFS HDV1PSFS

2.8 - 10mm VFAI camera,

video over coax

clear lower dome HDV1NSFC HDV1PSFC

In-ceiling 2.8 - 10mm VFAI camera,

video over coax

smoked lower dome

with white trim ring

HDV1NDFSW HDV1PDFSW

2.8 - 10mm VFAI camera,

video over coax

clear lower dome with

white trim ring

HDV1NDFCW HDV1PDFCW

* Only the in-ceiling model has a trim ring

Otros manuales para ACUIX ES

Tabla de contenidos

Otros manuales de Cámara de seguridad de Honeywell

Honeywell

Honeywell HD3VC4HR Manual de usuario

Honeywell

Honeywell HD70 Series Manual de usuario

Honeywell

Honeywell Lyric C2 Manual de usuario

Honeywell

Honeywell HEV28C Manual de usuario

Honeywell

Honeywell HD45IP Manual de usuario

Honeywell

Honeywell HDZ302LIK Manual de usuario

Honeywell

Honeywell EQUIP Series:EQUIP HD3HDIH Manual de usuario

Honeywell

Honeywell HCS544 Manual de usuario

Honeywell

Honeywell HC60WZ2E30 Manual de usuario

Honeywell

Honeywell Performance HED1PR3 Manual de usuario

Honeywell

Honeywell HCS544 Manual de usuario

Honeywell

Honeywell Performance HQA HD72HD4 Series Manual de usuario

Honeywell

Honeywell Performance HBD3PR2 Manual de usuario

Honeywell

Honeywell HD3USX Manual de usuario

Honeywell

Honeywell HEGS5300 Manual de usuario

Honeywell

Honeywell HEIPTZ-2201W-IR Manual de usuario

Honeywell

Honeywell HDZ SERIES Manual de usuario

Honeywell

Honeywell HBD95S Manual de usuario

Honeywell

Honeywell ScanDome II HSDN-251NS/PS Manual del propietario

Honeywell

Honeywell ScanDome III HSDC-252 Series Manual del propietario

Honeywell

Honeywell H4W2PER2 Manual de usuario

Honeywell

Honeywell HB273H Manual de usuario

Honeywell

Honeywell HBD7S(X) Manual de usuario

Honeywell

Honeywell H4W2PER2 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario