Honeywell 2450Cm Series Manual de usuario

Performance Series

Embedded Network Video Recorder

HEN040*3V

HEN041*3V

HEN041*3LV

HEN081*3V

HEN081*3LV

HEN161*3V

HEN161*3LV

(* = Storage in TB)

User Guide

Performance Series Embedded NVR User Guide

Revision

Issue

Date

Revisions

4/2021

New

document

Performance Series Embedded NVR User Guide

Cautions and Warnings

Warning:

Use only with the supplied power converters.

Caution:

There is a risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries in accordance to

local laws.

Caution:

Installation and servicing should be performed only by

qualified and experienced technicians to conform to all

local codes and to maintain your warranty.

Regulatory Statements

FCC Compliance Statement

Information to the User: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

iii

Performance Series Embedded NVR User Guide

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Note:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Manufacturer’s Declaration of Conformance

North America

The equipment supplied with this guide conforms to UL 60950-1 and CSA

C22.2 No. 60950-1.

Europe

The manufacturer declares that the equipment supplied is compliant with

the essential protection requirements of the EMC directive 2004/108/EC

and the Low Voltage Directive (LVD) 2006/95/EC, conforming to the

requirements of standards EN 55022 for emissions, EN 50130-4 for

immunity, and EN 60950 for electrical equipment safety.

Waste Electrical and Electronic Equipment (WEEE)

Correct Disposal of this Product (applicable in the European

Union and other European countries with separate collection

systems).

This product should be disposed of, at the end of its useful life, as

per applicable local laws, regulations, and s.

General Data Protection Regulation

Please be aware that this product can store personal data.

Personal data is protected by the General Data Protection Regulation

(2016/679) in Europe and therefore the owners of personal data have

obtained certain rights thanks to this regulation.

We strongly advise you to be fully aware of these owner (“data subjects”)

rights as well as which limitations you have to obey regarding the use and

distribution of this data.

Performance Series Embedded NVR User Guide

Further details can be found on the GDPR website of the EU:

https://ec.europa.eu/commission/priorities/justice-and-fundamental-

rights/data-protection/2018-reform-eu-data-protection-rules_en

Safety Instructions

Before installing or operating the unit, read and follow all instructions.

After installation, retain the safety and operating instructions for future

reference.

HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.

INSTALLATION

•Install in accordance with the manufacturer’s instructions.

•Installation and servicing should be performed only by qualified and

experienced technicians to conform to all local codes and to maintain

your warranty.

•Any wall or ceiling mounting of the product should follow the

manufacturer’s instructions and use a mounting kit approved or

recommended by the manufacturer.

OPERATION REQUIREMENT

•Install the PoE front-end device indoors.

•The device does not support wall mount.

•Do not place and install the device in an area exposed to direct sunlight

or near heat generating device.

•Do not install the device in a humid, dusty or fuliginous area.

•Keep its horizontal installation, or install it at stable places, and prevent

it from falling.

•Do not drip or splash liquids onto the device; do not put on the device

anything filled with liquids, in order to prevent liquids from flowing into

the device.

•Install the device at well-ventilated places; do not block its ventilation

opening.

•Use the device only within rated input and output range.

•Do not dismantle the device arbitrarily.

•Transport, use and store the device within allowed humidity and

temperature range.

POWER SOURCES - This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power supplied to

your facility, consult your product dealer or local power company.

MOUNTING SYSTEM - Use only with a mounting system recommended by the

manufacturer, or sold with the product.

Performance Series Embedded NVR User Guide

ATTACHMENTS/ACCESSORIES - Do not use attachments/accessories not

recommended by the product manufacturer as they may result in the risk of fire, electric

shock, or injury to persons.

CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

SERVICING - Do not attempt to service this unit yourself. Refer all servicing to qualified

service personnel.

REPLACEMENT PARTS - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions may result in fire, electric

shock or other hazards. Using replacement parts or accessories other than the original

manufacturers may invalidate the warranty.

Warranty and Service

Subject to the terms and conditions listed on the product warranty, during

the warranty period Honeywell will repair or replace, at its sole option, free

of charge, any defective products returned prepaid.

In the event you have a problem with any Honeywell product, please call

Customer Service at 1.800.323.4576 for assistance or to request a Return

Merchandise Authorization (RMA) number.

Be sure to have the model number, serial number, and the nature of the

problem available for the technical service representative.

Prior authorization must be obtained for all returns, exchanges, or credits.

Items shipped to Honeywell without a clearly identified Return

Merchandise Authorization (RMA) number may be refused.

List of Symbols

The following is a list of symbols that might appear on the NVR.

Table 1 List of Symbols

Symbol Explanation

The WEEE symbol.

This symbol indicates that when the end-user wishes to

discard this product, it must be sent to separate collection

facilities for recovery and recycling. By separating this

product from other household-type waste, the volume of

waste sent to incinerators or landfills will be reduced, and

thus natural resources will be conserved.

The UL compliance logo.

This logo indicates that the product has been tested and is

listed by UL (formerly Underwriters Laboratories).

Performance Series Embedded NVR User Guide

The FCC compliance logo.

This logo indicates that the product conforms to Federal

Communications Commission compliance standards.

The direct current symbol.

This symbol indicates that the power input/output for the

product is direct current.

The alternating current symbol.

This symbol indicates that the power input/output for the

product is alternating current.

The LDPE symbol.

This symbol indicates that this product is made of Low-

Density Polyethylene (LDPE).

The Direct Current symbol.

This symbol indicates that the product operates from a 12

V direct current.

The Lead-free symbol.

This symbol indicates that the product does not contain

lead (Pb).

The CCC compliance logo.

This logo indicates that the product conforms with the

China Compulsory Certification guidelines.

The Environment Friendly Use-period symbol.

This symbol indicates the length of time that this electronic

product can used without harming the environment.

The RCM Compliance symbol.

This symbol indicates that the product conforms with the

Australian RCM guidelines.

The TVU Lab symbol.

This symbol indicates that the product has been safety

tested by the TUV Lab.

The Direct Current symbol.

This Direct Current symbol indicates that the product

operates direct current.

This symbol indicates that the product is to be used

indoors.

vii

Performance Series Embedded NVR User Guide

The CE Compliance logo.

This logo indicates that the product conforms to the

relevant guidelines/standards for the European Union

harmonization legislation.

The Protective Earth symbol.

This symbol indicates that the marked terminal is intended

for connection to the protective earth/grounding

conductor.

This symbol is used to direct attention to important

information.

This symbol warns that the corresponding action could

result in an electric shock.

This symbol indicates On/Standby functionality of the

corresponding control/button/switch.

Otros manuales para 2450Cm Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Honeywell

Honeywell

Honeywell 4909 CPVC Manual de usuario

Honeywell

Honeywell 35 Series Manual de usuario

Honeywell

Honeywell Rae SensorRAE 4R+ Manual de usuario

Honeywell

Honeywell MAXPRO NVR SE Series Manual de usuario

Honeywell

Honeywell Mesh Router Manual de usuario

Honeywell

Honeywell HPM Instrucciones de montaje

Honeywell

Honeywell MIWI350 Manual de usuario

Honeywell

Honeywell HEN04111 Manual de usuario

Honeywell

Honeywell HDCD8TP Manual de usuario

Honeywell

Honeywell Embedded NVR Manual de instrucciones

Honeywell

Honeywell Notifier NFN-GW-EM-3 Manual de usuario

Honeywell

Honeywell HN300401 Series Manual de usuario

Honeywell

Honeywell hus-nvr-1032-e Manual de usuario

Honeywell

Honeywell TotalPlant LCN Guía del usuario

Honeywell

Honeywell 2450Cm Series Manual de usuario

Honeywell

Honeywell MAXPRO 2.5 Manual de usuario

Honeywell

Honeywell 30 Series Manual de usuario

Honeywell

Honeywell 057810 Manual de usuario

Honeywell

Honeywell MAXPRO NVR PE Manual de usuario

Honeywell

Honeywell FUSION STREAMER Manual de usuario

Honeywell

Honeywell MAXPRO NVR SE Manual de usuario

Honeywell

Honeywell HN350401 Series Manual de usuario

Honeywell

Honeywell MAXPRO NVR SE Manual de usuario

Honeywell

Honeywell MAXPRO NVR XE Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario