Honeywell HC900 Manual de usuario

12/2018 Power Supply Rack Extension Kit # 51-52-33-149 1

HC900 Controller

Power Supply Rack Extension Installation

PS Rack Extension 900RPE - (current revision number)

Document Number Form: 51-52-33-149

Effective Date: 12/2018

Supersedes: 04/2005

Summary

• Optional field installation kit

• Installed on the rack next to the Primary

Power Supply

• Provides a rack extension to hold a 2nd

(Reserve) Power Supply and Power

Status Module per I/O Rack in order to

maintain power to the rack if the Primary

Power Supply fails

• Allows either Power Supply to be

replaced while maintaining power to the

rack using the other Power Supply

• Available for the 8-Slot and 12-Slot I/O

Racks

• Not available for the 4 Slot I/O Rack

8-Slot Rack

12-Slot Rack

8-Slot Rack

12-Slot Rack

Figure 1 PS Rack Extension Location

Procedure Follow the procedure in Table 1 to install a Power Supply (PS) Rack Extension to

an 8-slot or 12-slot I/O rack.

Table 1 – PS Rack Extension Installation

Step Action

1 Remove power to the rack to be extended.

2 Remove the rack from its mounting

and remove all modules from the

rack. Place the empty rack on a

flat surface with the back plate

down.

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

2 Power Supply Rack Extension Kit # 51-52-33-149 12/2018

Step Action

3 900R12-0200 (Standard Rack) can

be converted to 900R12R-0200

(Redundant power Supply). Locate

resistors R3,R4, R5 and R6 on the

I/O rack backplane. Cut and remove

the resistors, replace end cap.

4 Remove the screws from the

outside of the I/O rack side plate.

Retain the side plate.

JP21

I/O Rack

Side Plate JP21JP21

I/O Rack

Side Plate

5 Attach the PS extension rack to

the I/O rack with 4 of the screws

(SEMS M3 X 5.0 mm long)

provided in the kit.

Make sure that J3 on the PS

extension rack backplane

meshes with JP21 on the I/O

rack backplane.

J3 JP21

J3J3 JP21

6 Attach the side plate previously

removed from the I/O rack to the

PS extension rack using the 6

screws (Flat Head M3 x 6.0 mm

long) provided in the kit.

Note that the countersunk holes in

the plate should face outward.

J3 JP21

I/O Rack

Side Plate

previously removed

J3 JP21

J3J3 JP21

I/O Rack

Side Plate

previously removed

7 You will need to drill two mounting

holes (same size mounting holes

as the main rack) for the 900RPE

rack.

Place the updated rack in

position and mark the 2

mounting hole locations (top

and bottom of rack of the 900

RPE extension).

Remove the rack and drill the

mounting holes.

900RPE Rear

Mounting Plate

900RPE Rear

Mounting Plate

8 Re-install the Power Supply, CPU or Scanner and I/O modules.

9 If available, install the new Power Supply Module and Power Status Module into the 900RPE

rack.

10 Mount the updated rack assembly and connect a separate power source with disconnect to the

new power supply.

Otros manuales para HC900

Otros manuales de Controladores de Honeywell

Honeywell

Honeywell WEB-600E Manual de usuario

Honeywell

Honeywell UMC800 Manual de usuario

Honeywell

Honeywell T775M Manual del propietario

Honeywell

Honeywell WEB-300E Series Manual de usuario

Honeywell

Honeywell Touchpoint Plus Nota de versión

Honeywell

Honeywell BACnet Manual de usuario

Honeywell

Honeywell AutoRAE 2 Manual de usuario

Honeywell

Honeywell VB6 Series Manual de usuario

Honeywell

Honeywell Aquastat L7224U Manual de usuario

Honeywell

Honeywell MN6105VAV Manual de usuario

Honeywell

Honeywell RP920A Manual de servicio

Honeywell

Honeywell FR124 Manual de usuario

Honeywell

Honeywell Ex-Or MLSM2000A Manual de instalación y operación

Honeywell

Honeywell ML7984B Manual de usuario

Honeywell

Honeywell UDC3500 Manual de usuario

Honeywell

Honeywell T775U 2000 Series Manual de usuario

Honeywell

Honeywell PW-6000 Manual del operador

Honeywell

Honeywell V4600 Guía del usuario

Honeywell

Honeywell S05 Series Manual de usuario

Honeywell

Honeywell VK41 V Series Manual de usuario

Honeywell

Honeywell UDC3500 Manual de usuario

Honeywell

Honeywell CLMEVA00IB24NM Manual de usuario

Honeywell

Honeywell SSW2-1M Manual de usuario

Honeywell

Honeywell IAQ Poin Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario