Honeywell Evohome Instrucciones de uso
1
Application Manual
2evotouch
Content
1. Introduction ............................................................................................................................3
1.1 Wireless communication........................................................................................................................................ 3
1.2 Product overview ................................................................................................................................................... 4
2. Application examples ............................................................................................................6
2.1 Single zone thermostat with boiler control............................................................................................................. 6
2.2 Two zone system with zone valves........................................................................................................................ 8
2.3 Multizone system with radiators........................................................................................................................... 10
2.4 Multizone system with radiators and remote sensor............................................................................................ 12
2.5 Multizone system with underoor heating individual room thermostat ................................................................ 14
2.6 Multizone system with underoor heating individual room sensor....................................................................... 16
2.7 Multizone system with radiators and underoor heating...................................................................................... 18
2.8 Multizone system with mixing valve and radiators............................................................................................... 20
2.9 Multizone boiler control with up to 4 controllers................................................................................................... 22
3. Application settings .............................................................................................................23
4. Generic Binding....................................................................................................................24
4.1 Conguration modes .......................................................................................................................................... 24
4.2 Sensor binding .................................................................................................................................................... 27
4.3 Binding the evotouch controller to the HR80 radiator controller .......................................................................... 28
4.4 Binding the evotouch controller to the BDR91 / HC60NG / R6660D relay module.............................................. 31
4.5 Binding the evotouch controller to the OPENTHERM-Bridge boiler feedback .................................................... 33
4.6 Binding the evotouch controller to the HM80 mixing valve controller ................................................................. 35
4.7 Binding the evotouch controller to the HCE80(R) / HCC80(R) underoor heating controller .............................. 37
4.8 Binding the evotouch controller to the DT92 room adjuster/sensor..................................................................... 40
4.9 Binding the evotouch controller to the HCW82 room adjuster/sensor or to the HCF82 room sensor.................. 42
4.10 Binding the evotouch controller to the HB85 temperature sensor ....................................................................... 44
Application Manual 3
Introduction1.
As part of the wide range of Honeywell´s product portfolio for wireless communication products we provide heating
solutions for individual zoning control. This application manual explains examples for heating solutions, particularly for
radiator, underoor and electrical heating control.
Wireless communication1.1
The peripherals communicate with the evotouch controller based on our proven RF wireless technology 868 MHZ.
The products include a transceiver which allows bi-directional (two-way) communication or uni-directional (one-way)
communication with the evotouch controller.
DT92 HCW82 HCF82 HB85
HCE80 (R)
HCC80 (R)
BDR91 HC60NG
evotouch
HM80 HR80
4evotouch
Product overview1.2
Picture
Product
OS number Description
evotouch controller Modern designed multizoning controller with touch
screen display for up to 8 zones. With individual time
program for each zone, guided programming, text-based
user guide.
Underoor heating
controller
HCE80(R) Underoor heating controller for up to 5 zones. Pump
control, analogue output for boiler feedback MCR200,
MCR40, EXCEL controllers. External antenna required.
Optional wireless boiler feedback via relay BDR91. Each
output can drive up to 3 thermal actuators. The HCE80R
has the same conguration, but instead of an analogue
output it has an integrated boiler relay.
Underoor heating
controller
HCC80(R) Underoor heating controller for up to 5 zones. Pump
control, analogue output for boiler feedback MCR200,
MCR40, EXCEL controllers. Antenna integrated.
Optional wireless boiler feedback via relay BDR91. Each
output can drive up to 3 thermal actuators, transceiver
868 MHz. The HCC80R has the same conguration, but
instead an analogue output it has an integrated boiler
relay.
External antenna HRA80 External active antenna for HCE80(R). Up to
3 controllers can be connected to one antenna,
transceiver 868 MHz.
OPENTHERM-Bridge R8810A1018 OPENTHERM-Bridge interface for boiler control (heat
on demand), transceiver 868 MHz.
Extension module HCS80 3 zones upgrade for HCE80(R) / HCC80(R) from 5 to
8 zones.
Room sensor HCF82 Room unit with integrated temperature sensor, battery-
powered (2x1,5V AA LR6), transmitter 868 MHz.
Room sensor /
setpoint adjustment
HCW82 Room unit with integrated temperature sensor /
setpoint adjustment +/– 12 °C. Window contact, battery-
powered (2x1,5V AA LR6) or external power supply,
transmitter 868 MHz.
Digital room unit DT92 Digital room unit with integrated temperature sensor
and setpoint adjustment 8 to 30 °C, battery-powered
(2x1,5 V AA LR6), transceiver 868 MHz.
Mixing valve controller HM80 Mixing valve controller for 3-position mixing valve. With
pump control and ow temperature sensor connection.
Adjustable parameters: valve run time, pump running
time, min./max. ow temperature, manual override
buttons to open/close valve, receiver 868 MHz.
Application Manual 5
Picture
Product
OS number Description
Radiator controller HR80 Radiator controller with energy-saving features,
e.g. window function, manual setpoint override, display
operating status and battery exchange. Fits valves
of brands Honeywell Braukmann, MNG, Heimeier,
Junkers, Oventrop beginning from 03/1998. Adaptors
for Danfoss, Herz, Vaillant, Oventrop available. Battery-
powered (2x1,5 V AA LR6), transceiver 868 MHz.
Relay module 5 A BDR91 Relay module with change over contact 5 A,
transceiver 868 MHz.
Relay module 8 A HC60NG/
R6660D
Relay module with change over contact 8 A,
receiver 868 MHz.
Outdoor sensor HB85 Module with integrated temperature sensor for
measuring the outside temperature. Battery-powered
(2x1,5 V AA LR6), transmitter 868 MHz.
Accessories
Thermal actuator MT4-230 NG Thermal actuator normally closed 230 V AC
Thermal actuator MT4-230 NO Thermal actuator normally open 230 V AC
6evotouch
Application examples2.
Single zone thermostat with boiler control2.1
HB85
BDR91
evotouch
Boiler room Zone 1
Zone 1
Notes
The internal room sensor of the• evotouch controller must be activated
BDR91 relay module or OPENTHERM-Bridge can be used•
Application Manual 7
Application description
This application shows 1 zone boiler control where the evotouch controller controls the boiler directly depending on heat
demand via the BDR91 relay module (switching ON/OFF).
The internal room sensor of the evotouch controller is used in order to measure the room temperature.
Option
Outdoor sensor•
The HB85 outdoor sensor measures the outside temperature. It must be installed if data is required.
Steps to do
Activate the internal room sensor of thefevotouch controller. See section 4.2
Bind BDR91 relay module / OPENTHERM-Bridge to thefevotouch controller. See section 4.4
Check RF communication.f
8evotouch
Two zone system with zone valves2.2
BDR91
Zone 2 Zone 1
evotouch
Zone 2
Boiler room Zone 1
BDR91
DT92
Notes
The internal room sensor of the• evotouch controller must be activated for zone 1
Instead of DT92 the HCW82 / HCF82 room units can be used•
Application Manual 9
Application description
For zone 1, the internal room sensor of the evotouch controller is used.
Zone 2 requires the DT92 room unit for the room temperature measurement and local remote setpoint adjustment.
The setpoints can be altered directly on the evotouch controller by manual override, time program, lifestyle actions and
DT92 as well. The same actual room temperature setpoint will be displayed on the evotouch controller and DT92.
In total, 8 zones can be controlled individually.
Options
Heat demand•
The evotouch controller calculates the heat demand and communicates it to the boiler relay BDR91 / HC60NG or
OPENTHERM-Bridge which controls the boiler.
Outdoor sensor•
The HB85 outdoor sensor measures the outside temperature. It must be installed if data is required.
Steps to do
Activate the internal room sensor of thefevotouch controller for zone 1. See section 4.2
Bind thefevotouch controller to the DT92 as room/setpoint sensor to zone 2. See section 4.8
Bind thefevotouch controller to the BDR91 / HC60NG relay module to zone 1 and zone 2. See section 4.4
Optional: Bind thefevotouch controller to the BDR91 relay module / OPENTHERM-Bridge
for boiler control. See section 4.5
Optional: Bind thefevotouch controller to the HB85 sensor for outdoor temperature. See section 4.10
Check RF communication for each sensor and actuator individually.f
10 evotouch
Multizone system with radiators2.3
Example: 6 zones, up to 8 zones are possible
evotouch
BDR91
Zone 2
Zone 4 Zone 5 Zone 6 ... 8
Zone 3
Boiler room Zone 1
HR80
HR80
HR80
HR80
HR80
HR80
Notes
The internal room sensor of the• evotouch controller must be activated for zone 1
• Zone 1: HR80 internal room sensor not used
Optional boiler feedback: BDR91 relay module or OPENTHERM-Bridge•
Otros manuales para Evohome
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de Honeywell
Honeywell
Honeywell Tradeline H1008A Manual de operación
Honeywell
Honeywell TheraPro HR90 Manual de usuario
Honeywell
Honeywell V4055A Manual de usuario
Honeywell
Honeywell Pro-Watch 7000 Manual de usuario
Honeywell
Honeywell McDonald's HEMS II Manual de usuario
Honeywell
Honeywell ML7421A1032 Manual de operación
Honeywell
Honeywell AUTOMATIC CONTROL Manual de instalación y operación
Honeywell
Honeywell ML6421A Manual de usuario
Honeywell
Honeywell MS4104F1010 Manual de usuario
Honeywell
Honeywell Z11S Manual de usuario
Honeywell
Honeywell 10260S Series Manual de usuario
Honeywell
Honeywell MS4120S Manual de operación
Honeywell
Honeywell HON 372 Manual
Honeywell
Honeywell HCE 40 Manual de programación
Honeywell
Honeywell DC1010 Guía de inicio rápido
Honeywell
Honeywell CN34 Series Manual de operación
Honeywell
Honeywell ML7421A Manual de operación
Honeywell
Honeywell SUPER TRADELINE L4064B Manual de usuario
Honeywell
Honeywell LKS 131 Manual de usuario
Honeywell
Honeywell DBC2000 Series Manual de usuario
