Honeywell DC1000 SERIES Manual de usuario

DC1000 Series Program Configuration Guide

Operation Mode Configuration 1

Configuration 2Program Mode

Set Up Mode

(1)

(3) (2) (2)

(3)

How to move from a MODE to another

(1) Press ‘SET’ key for 5 seconds, it grants access to ‘Configuration 1’ mode or return to

‘Operation’ mode from ‘Configuration 1’ mode.

(2) Press ‘SHIFT’ key for 5 seconds while pressing ‘SET’ key first, it grants access to

‘Configuration 2’ mode or return to ‘Operation’ mode.

(3) All parameters related to program configuration will be displayed next to parameters in

‘Operation’ mode. (* These parameters will be shown in program model only)

CAUTION

DO NOT access to ‘Set Up’ mode without instruction from techical assistant.

1. Program Function

The program function of DC1000 has 2 programs, and each program has Max. 8 segments.

Each segment can be defined as a period of “RAMP” or “SOAK” status.

2. Terminologies

Program : A pattern which consists of some segments

Segment : A RAMP status or a SOAK status

RAMP status : Status with changing SP

SOAK status : Status with fixed SP

3. Operation

3-1 Key functions

(START) : Start a program, ‘PRO’ LED to be flickered during the running operation

(WAIT) : Suspend the running program. ‘PRO’ LED will be turned on

+SET(JUMP) : Skip a current segment

+SET(RESET) : Stop the program running. ‘PRO’ LED will be turned off

3-2 Program Alarm Functions

Case 1) Segment Completion Alarm

ALD1 (Alarm Code for Alarm 1) = 07

AL1 (Alarm Condition) = 2 (‘2’ means Segment No.)

ALT1 (Alarm Time) = 00.10

Alarm Operation: Once Segment 2 is completed, Alarm 1 will become actuated

Case 2) Program Running Alarm

ALD1 = 17

Alarm Operation: During the program running, Alarm 1 will become actuated

* DC1000 does not have END, so the program will complete all the segments if segments are defined. If

the program should be finished earlier, set the ‘OUT’ of next segment to 0, then the program running will

be ended right after the previous segment is completed.

3-3 Link Function

PTN=1, Run Program 1 (Max. 8 segments)

PTN=2, Run Program 2 (Max. 8 segments)

PTN=0, Run Program 1 and Program 2 successively (Max. 16 segments)

* To have link function (PTN=0), PTN1 & PTN2 should be set first

Set point for Seg.5

SET

Start from Operation Mode

Set program pattern

Range: 0~2

Program segment display

‘Pattern’ – ‘Segment’

Program timer display

Range: 99hour 59min

Set point for Seg.1

Range: LSPL~USPL

Set time for Seg.1

Range: 0~99H59M

Set output for Seg.1

Range: 0~100% (if out=0, no program)

Set point for Seg.2

Set time for Seg.2

Set output for Seg.2

Set point for Seg.3

Set time for Seg.3

Set output for Seg.3

Set point for Seg.4

Set time for Seg.4

Set time for Seg.5

Set output for Seg.5

Set point for Seg.6

Set time for Seg.6

Set output for Seg.6

Set point for Seg.7

Set time for Seg.7

Set output for Seg.7

Set point for Seg.8

Set time for Seg.8

Set output for Seg.8

Set output for Seg.4

Range: (1,2,0)-(1~8)

Back to Operation Mode

Otros manuales para DC1000 SERIES

Otros manuales de Controladores de Honeywell

Honeywell

Honeywell UDC 2300 Guía

Honeywell

Honeywell Touchpoint Plus Nota de versión

Honeywell

Honeywell V4055A Manual de usuario

Honeywell

Honeywell ComfortPoint Open CPO-PC400-W Manual de usuario

Honeywell

Honeywell SEC-H-600 Manual de usuario

Honeywell

Honeywell Experion C300 Manual de usuario

Honeywell

Honeywell HercuLine 2000 Series Manual de usuario

Honeywell

Honeywell UDC2800 Manual de usuario

Honeywell

Honeywell M7061 Manual de usuario

Honeywell

Honeywell Excel 10 Manual de usuario

Honeywell

Honeywell T775A Manual de usuario

Honeywell

Honeywell SUPER TRADELINE L4064B Manual de usuario

Honeywell

Honeywell EDC 200 Series Manual de usuario

Honeywell

Honeywell HCU 23 Manual de usuario

Honeywell

Honeywell Spyder PUB6438S Manual de usuario

Honeywell

Honeywell SUPER TRADELINE S8610U Manual de usuario

Honeywell

Honeywell ATC928G3000 Manual de usuario

Honeywell

Honeywell SILENT KNIGHT SK-Control Manual

Honeywell

Honeywell IAQ Poin Manual de usuario

Honeywell

Honeywell BC-200 Instrucciones de montaje

Honeywell

Honeywell Aquastat L7224U Manual de usuario

Honeywell

Honeywell Experion C300 Manual de usuario

Honeywell

Honeywell PRO-2200 Manual de usuario

Honeywell

Honeywell UDC3300 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario