Honeywell IFP-300 Especificaciones técnicas

Model IFP-300 Basic Operating Instructions

These Instructions must be framed and displayed next to the IFP-300 panel in accordance with NFPA 7 fire code for

Local Protected Fire Alarm Systems. Test the system in accordance to NFPA 7 .

Operation

Task to Per

form

Silence Alarms and

Troubles

Press

SILENCE

then enter a code if prompted. Silence LED will light.

Reset Alarms

Press

RESET

then enter a code if prompted.

View Alarms,

Supervisory, and

Troubles

For each type of condition press the Up or Down button associated for Alarms,

Supervisory, or Troubles.

View status of Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Then press to select Point Status.

Select the module the device is located on by using the Up or Down button. Then

press ENTER.

Enter the point number.

Conduct a Fire Drill

Call service company

May be disabled

May not be allowed by

AHJ in your area.

Press

ENTER

to access Main

Menu.

Then Press 1 to select System Tests.

Press 1 to select Fire Drill.

Press ENTER to start the fire drill.

Press ENTER to end the fire drill.

TROUBLE

FIRE: ALARM SUPERVISORY

CO: ALARM SUPERVISORY

SYSTEM: TROUBLE

Check Detector

Sensitivity

Press

ENTER

to access Main

Menu.

Press for Point Status.

From the list that displays, select the SLC module where the point you want to view is

located.

The fourth line of the display shows the sensitivity status. “NORMAL” means the

detector is in compliance with NFPA 7 .

“CAL MAINT” means the detector is in compliance with NFPA 7 but maintenance should

be performed soon.

“CAL TRBLE” means the detector is not in compliance with NFPA 7 .

Set Time and Date

Press

ENTER

to access Main

Menu.

Press 4 to select Set Time & Date. Enter a code if prompted

Make changes in the fields on the screen as necessary.

When the time and date are correct, press ENTER.

Enable / Disable a Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Press 1 for Disable / Enable Pt

Press 7 for Disable / Enable Pt.

Use the Up or Down button to move through the list. Then press ENTER to select the

module where the point you want to disable/enable is located

Enter the point or circuit number that you want to disable/enable.

Press the right arrow key to toggle between NORMAL (enable) or DISABLE.

View Event History

From the Program Menu.

Press 3 to select Event History.

Press the Up or Downbutton to view events in the history buffer.

For Service Call:

(800) 639- 5 1

Otros manuales de Panel de control de Honeywell

Honeywell

Honeywell Notifier NFS-320 Manual de usuario

Honeywell

Honeywell Farenhyt Series Manual de usuario

Honeywell

Honeywell Accenta Manual de usuario

Honeywell

Honeywell Fire-Lite Alarms ES-50X Manual de usuario

Honeywell

Honeywell FCI Gamewell Flex 404 Manual de usuario

Honeywell

Honeywell NOTIFIER AM1000 Manual de usuario

Honeywell

Honeywell VISTA-128BPT Guía de inicio rápido

Honeywell

Honeywell Galaxy 3-48C Manual de usuario

Honeywell

Honeywell Lynx Touch L5100 Guía de instalación

Honeywell

Honeywell Flex Manual de instrucciones

Honeywell

Honeywell NOTIFIER SFP-5UD Series Manual de usuario

Honeywell

Honeywell Notifier NFS-320 Manual técnico

Honeywell

Honeywell AQ254 Series Manual de usuario

Honeywell

Honeywell NOTIFIER NCA-2 Manual de usuario

Honeywell

Honeywell AQ252 Series Manual de usuario

Honeywell

Honeywell THOR VM1 Manual de usuario

Honeywell

Honeywell TotalZone TZ-4 Manual de operación

Honeywell

Honeywell Fire-Lite Alarms MS-9600LS Manual de usuario

Honeywell

Honeywell TrueZONE HZ311 Manual de usuario

Honeywell

Honeywell NOTIFIER NFW-50X Manual de usuario

Honeywell

Honeywell NOTIFIER AM-8200 Manual del propietario

Honeywell

Honeywell CM737 Instrucciones de instalación

Honeywell

Honeywell IFP-2100 Especificaciones técnicas

Honeywell

Honeywell Fire-Lite Alarms MS-9050UD Manual de usuario

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas