Honeywell IFP-2100 Especificaciones técnicas

Model IFP-2100

Basic Operating Instructions

These instructions must be framed and displayed next to the IFP-2100 panel in accordance

with NFPA 72 fire code for Local Protected Fire Alarm Systems.

FS = Fire System

Operation Task to Perform

Silence Alarms

and Troubles

Press SILENCE then enter a code if prompted. Silence LED will light.

Reset Alarms

1.

Press

RESET

.

2.

Press 1 to Reset Fire System.

View all active

alarms, troubles,

and supervisory

signals

The highest priority event will display first. Press the Down arrow to view location and type of alarm or trouble.

View a Point’s

Status

1.

Press ENTER to access Main Menu.

2.

Press 2 to select Point Functions.

3.

Then press 2 to select Point Status.

4.

Select the module the device is located on by using the Up or Down button. Then pressENTER.

5.

Enter the point number.

Conduct a Fire

Drill

Hold the DRILL button and then enter a code if prompted. OR

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 1 to select System Tests.

3.

Enter code if prompted, then press 1 to select Fire Drill.

4.

Press ENTER to start the fire drill, and Press ENTER to end the fire drill.

NOT APPROVED BY VERMONT FOR FIRE DRILLS.

Set Time and

Date

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 4 to select Set Time & Date. Enter a code if prompted.

3.

Make changes to the fields on the screen as necessary.

4.

Press ENTER if you wish to keep thechanges.

5.

Press ENTER to set the entered time anddate.

Enable / Disable

a Point

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Press 2 to select Point Functions.

3.

Enter code if prompted, then press 1 to select Disable / Enable Point.

4.

Press 7 to select Disable/Enable Point.

5.

Select the module the point is located on by using the up or down arrow. Then press ENTER.

6.

Enter the point number then press ENTER.

7.

Press the right arrow to Disable/Enable Point.

To Gain /Request

ECS Control

1. Press the Button and follow the on-screen Instructions.

Note: When ECS Control LED is blinking, another LOC has ECS Control. ECS Control LED is on steady when the

LOC has ECS Control.

For Service call:

(800) 639-2521

Otros manuales para IFP-2100

1

Otros manuales de Panel de control de Honeywell

Honeywell

Honeywell Galaxy Dimension series Guía del usuario

Honeywell

Honeywell GALAXY 16103 Manual de usuario

Honeywell

Honeywell SLC Manual de usuario

Honeywell

Honeywell Galaxy Dimension series Guía de configuración rápida

Honeywell

Honeywell NOTIFIER INSPIRE E10 Manual de capacitación

Honeywell

Honeywell Notifier AFP-100 Manual de usuario

Honeywell

Honeywell Fire-Lite Alarms MS-9050UD Manual de usuario

Honeywell

Honeywell Silent Knight 5860 Manual

Honeywell

Honeywell Farenhyt Series Manual de usuario

Honeywell

Honeywell 13270-01LB Manual de usuario

Honeywell

Honeywell TrolATemp TZ-3 TotalZone Manual de operación

Honeywell

Honeywell LT-32 Manual de usuario

Honeywell

Honeywell 013080 Manual de instrucciones

Honeywell

Honeywell Fire-Lite Alarms MS-9600 Manual de usuario

Honeywell

Honeywell Notifier AFP-3030 Manual de usuario

Honeywell

Honeywell IFP-75 Manual de usuario

Honeywell

Honeywell NOTIFIER Pearl Guía de instalación

Honeywell

Honeywell Ademco Accord Manual de usuario

Honeywell

Honeywell AQ254 Series Manual de usuario

Honeywell

Honeywell Domonial CMI Series Guía del usuario

Honeywell

Honeywell NOTIFIER AM1000 Manual de usuario

Honeywell

Honeywell Fire-Lite MS-5UD-3 Manual de usuario

Honeywell

Honeywell Gamewell Flex 402 Manual de usuario

Honeywell

Honeywell MORLEY IAS DX Series Manual de usuario

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas