Honeywell 3800 Linear Series Manual de usuario

3800 Linear Series

Quick Start Guide

EN-1

Note: Refer to your user’s guide for information

about cleaning your device.

Getting Started

Turn off computer’s power before connecting the

scanner, then power up the computer once the

scanner is fully connected.

USB Connection

EN-2

Keyboard Wedge Connection

Serial (RS-232) Connection

Note: Does not apply to the 3800g Lite Plus.

EN-3

Reading Techniques

The view finder

projects a red

aiming beam that

should be

centered over the

bar code.

Hold the scanner

over the bar code,

pull the trigger,

and center the

aiming beam on

the bar code.

The aiming beam is smaller when the scanner is

closer to the code and larger when it is farther from

the code. Hold the scanner close to smaller bar

codes, and farther away from large bar codes to get

a proper read.

If the bar code is highly reflective (e.g., laminated),

you may need to tilt the scanner at an angle so the

bar code can be scanned.

EN-4

To read PDF417 bar codes with a PDF-enabled

3800, hold the trigger down and move the scanner

up and down so the aiming line sweeps from the top

of the bar code to the bottom, and back up.

This ensures that the entire code is scanned.

Note: This only applies to a PDF enabled 3800/

3800g.

Standard Product Defaults

The following bar code resets all standard product

default settings.

Standard Product Defaults

EN-5

Interface

Scan the bar code that describes the PC or

interface you are using.

AT/PS2 Keyboard Wedge

(Default)

RS-232

(Does not apply to 3800g Lite Plus)

USB Keyboard (PC)

Emulate External Keyboard

EN-6

Keyboard Country

Scan the Program Keyboard Country bar code

below, then scan the numeric bar code(s) from

page EN-10, then the Save bar code to program the

keyboard for your country. As a general rule, the

following characters are not supported by the

scanner for countries other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~.

Note: For a complete list of country codes, see the

User’s Guide for your product at our website,

www.honeywell.com/aidc.

Country Code Scan Country Code Scan

Belgium 1 Italy 5

Denmark 8 Norway 9

Finland 2 Spain 10

France 3 Switzerland 6

Germany/Austria 4 USA (Default) 0

Great Britain 7

Program Keyboard Country

Save

EN-7

Trigger

The following bar codes will allow you to use the

reader in Manual Trigger mode (need to press the

trigger to read), Automatic Trigger mode (the beam

is always on), or Presentation mode (the reader is

activated when it “sees” a bar code).

Reread Delay

This sets the time period before the scanner can

read the

same

bar code a second time. Setting a

reread delay protects against accidental rereads of

the same bar code.

Manual Trigger

(Default)

Automatic Trigger

Presentation Mode

Medium Reread Delay

for 3800 only

Medium Reread Delay

for 3800g, 3800g Lite Plus, 3800r, and 3800i

EN-8

Suffix

If you want a carriage return after the bar code,

scan the Add CR Suffix bar code. To add a tab

after the bar code, scan the Add Tab Suffix bar

code. Otherwise, scan the Remove Suffix bar

code to remove the suffixes.

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a

Code ID prefix to all symbologies at once.

Note: For a complete list of Code IDs, see the

User’s Guide for your product at our website,

www.honeywell.com/aidc.

Add CR Suffix

Remove Suffix

Add Tab Suffix

Add Code ID Prefix To All Symbologies

(Temporary)

Otros manuales para 3800 Linear Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Lector de código de barras de Honeywell

Honeywell

Honeywell Voyager 1452g Series Manual de usuario

Honeywell

Honeywell 3800gPDF - Hand Held Decoding Linear Imager Manual de usuario

Honeywell

Honeywell Genesis 7580G Manual de usuario

Honeywell

Honeywell IS4921 Guía de configuración rápida

Honeywell

Honeywell MS5145 - 00 Manual de usuario

Honeywell

Honeywell PX4-6IE-CUTR-IG-1 Manual de usuario

Honeywell

Honeywell VOYAGER 1202G BF Manual de usuario

Honeywell

Honeywell MS2431 Manual de usuario

Honeywell

Honeywell MX7 Tecton Manual de usuario

Honeywell

Honeywell VOYAGER 1200G Manual de usuario

Honeywell

Honeywell MS9520 Voyager Manual de usuario

Honeywell

Honeywell Xenon XP 1950h Manual de usuario

Honeywell

Honeywell Granit 1920i Manual de usuario

Honeywell

Honeywell YJ HF600 Manual de usuario

Honeywell

Honeywell VoyagerGS 9590 Series Manual de usuario

Honeywell

Honeywell Captuvo SL22 Manual de usuario

Honeywell

Honeywell IT3800 Manual de usuario

Honeywell

Honeywell MK7580-30A38-00-A - MS7580 Genesis - Wired Barcode... Manual de usuario

Honeywell

Honeywell VoyagerCG MS9540 Manual de usuario

Honeywell

Honeywell Xenon CCB01-010BT-BF Manual de usuario

Honeywell

Honeywell XENON 1902 Manual de usuario

Honeywell

Honeywell Xenon XP 195 Series Manual de usuario

Honeywell

Honeywell BTRS-QS Manual de usuario

Honeywell

Honeywell Solaris MS7820 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario