Home Decorators Collection HARRINGTON 59236 Manual de usuario

USE AND CARE GUIDE

HARRINGTON 36-INCH CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Item #

1004 589 957

Model #59236

UL Model #32-STRE

Table of Contents ................................................................2

Safety Information...............................................................2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation............................................................................6

Assembly..............................................................................7

Operation ...........................................................................15

Care and Cleaning.............................................................16

Troubleshooting.................................................................16

1. To reduce the risk of electric shock, ensure the electricity has been

turned off at the circuit breaker or fuse box before you begin.

2. All wiring must be in accordance with the National Electrical Code

ANSI/NFPA 70-1999 and local electrical codes. Electrical installation

should be performed by a qualied licensed electrician.

3. The outlet box and support structure must be securely mounted and

capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed

outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg)

or less.”

4. The fan must be mounted with a minimum of 7 ft (2.1 m) clearance

from the trailing edge of the blades to the oor.

5. Do not operate the reversing switch while the fan blades are in

motion. You must turn the fan off and stop the blades before you

reverse the blade direction.

6. Do not place objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other items, use

caution when working around or cleaning the fan.

8. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL listed and marked suitable for use

with the model fan you are installing. Switches must be UL General

Use Switches. Refer to the instructions packaged with the light kits

and switches for proper assembly.

9. After making electrical connections, spliced conductors should be

turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the outlet box.

10. All setscrews must be checked and retightened where necessary

before installation.

WARNING: To reduce the risk of personal injury,

do not bend the blade brackets (also referred to as

anges) during assembly or after installation. Do not

insert objects in the path of the blades.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

WARNING: Electrical diagrams are for reference

only. Optional use of any light kit shall be UL-listed

and marked suitable for use with this fan.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan

and other items, use caution when working around or

cleaning the fan.

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“Acceptable for fan support of 35 lbs. (15.9 kg) or

less”, and use screws provided with the outlet box.

WARNING: To reduce the risk of re or electric

shock, this fan should only be used with fan speed

control part no. AP-8RDL, manufactured by Dawnsun

Electronic Co., LTD.

READ AND SAVE THESE INSTRUCTIONS.

WARNING: To reduce the risk of electric shock, this

fan must be installed with an isolating wall switch.

3HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Installation

Warranty

SPECIFICATIONS

TOOLS REQUIRED

NOTE: These are approximate measures. They do not

include the amps and wattage used by the light kit.

Phillips

screwdriver

Flat blade

screwdriver

Adjustable

wrench

Electrical

tape

Wire

cutter

Step ladder

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime

after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be

free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the

original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is

returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product

are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by afxing any accessories, is not covered by

this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish, including rusting, pitting, corroding,

tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of

“wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is

no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability

and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the

time period as specied in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts,so the above limitation

may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product

use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages,

so the above exclusion or limitation may not apply to you. This warranty gives specic legal rights, and you may also have other rights which vary

from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must

be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

Size Speed Volts Amps Watts RPM CFM Net

Weight

Gross

Weight Cu. Ft.

36 in.

Low

120

0.16 9 162 1536

20.50 lbs

(9.3 kg.)

24.30 lbs

(11.02 kg) 2.391 cu.ft.Medium 0.22 19 252 2357

High 0.27 32 311 2840

Part Description Quantity

AA Blade attachment screws 16

BB Plastic wire connector 3

CC Decorative frame screws 6

DD Nuts 6

JJ Hanger pin 1

KK Locking pin 1

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Pre-Installation (continued)

AA BB

JJ KK

5HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Part Description Quantity

A Slide-on mounting bracket (inside canopy) 1

B Ball/downrod assembly 1

C Canopy 1

D Decorative motor collar cover 1

E Fan-motor assembly 1

F Blade 5

G Cycle frame piece 3

H Attachment frame piece 3

Part Description Quantity

I Stable pads 3

J Light kit pan 1

K Light kit tter assembly 1

L Glass shade 1

M Receiver 1

N Remote control 1

O Lead wire 1

P Battery 1

IMPORTANT: This product and/or components are

governed by one or more of the following U.S. Patents:

5,947,436; 5,988,580; 6,010,110; 6,046,416; 6,210,117

and other patents pending.

PACKAGE CONTENTS

Pre-Installation (continued)

1 2 3 4

ON DIP

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “Acceptable

for fan support of 35 lbs. (15.9 kg) or less”, and use

screws provided with the outlet box. An outlet box

commonly used for the support of lighting xtures may

not be acceptable for fan support and may need to be

replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting

box, then install one using the following instructions:

□Disconnect the power by removing the fuses or turning off

the circuit breakers.

□Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and

support structure must be securely mounted and capable of

reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet

boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg)

or less.” Do not use a plastic outlet box.

The illustrations below show three different ways to mount the

outlet box.

To hang your fan where there is an existing xture but no ceiling joist,

you may need an installation hanger bar as shown above

(available at any Home Depot store).

Outlet Box

Hanger Bar

Recessed

Outlet

Box

Provide Strong

Support

Ceiling

Mounting

Plate

NOTE: You may need a longer downrod to maintain proper

blade clearance when installing on a steep, sloped ceiling. The

maximum angle allowable is 20° away from horizontal.

7HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly

Attaching the blades

Assembling the decorative frame

□Attach three cycle frame pieces (G) to be a complete

decorative frame, make them as as a cycle shade, then

insert stable tabs (I) by aligning the holes on cycle frame

pieces (G).

□Insert three attachment frame pieces (H) by aligning the

hole on the stable tabs (I) and the cycle frame piece (G),

then secure with decorative frame screws (CC) and nuts

(DD). Make sure all screws are rmly tightened.

□Attach a blade (F) to the fan motor assembly (E) by

inserting the blade (F) into slots in the side of the fan

motor assembly (E) and aligning the three screws holes in

the blade with the holes in the center ywheel and secure

with screws (AA).

□Make sure all the screws are ﬁrmly tightened.

□Repeat these steps for the remaining blades.

Assembly - Standard Ceiling Mount

Preparing for mounting

□Pull off the canopy bottom cover (HH) from the canopy (C).

□Loosen the two canopy screws (MM) located in the

bottom of the mounting bracket (A), and turn the canopy

counterclockwise to remove the mounting bracket (A) from

the canopy (C).

NOTE: The magnet is pre-attached on the canopy

bottom cover (C) for you to remove and install easily.

Installing the attachment frame

pieces to motor housing

□Remove all nine screws (EE) from the top of the motor

assembly (E).

□Attach a attachment frame piece (H) to the motor assembly

(E) by aligning the holes on the attachment frame piece (H)

with the holes on the motor assembly (E) and inserting three

screws (EE) into the holes and through the motor assembly (E).

□Tighten each screw to secure the motor assembly (E).

□Repeat this step for each attachment frame pieces (H).

9HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Routing the wires

□Route the wires exiting the top of the fan motor

assembly (E) through the decorative motor collar cover

(D) and then the center of the canopy bottom cover (HH).

□Make sure the opening of the canopy (C) is on top and

insert the ball/downrod (B) through the canopy (C).

□Route the wires exiting the top of the fan motor

assembly (E) through the downrod as shown.

Assembly - Standard Ceiling Mount (continued)

Assembling the fan

WARNING: Failure to properly install the locking pin (KK) could

result in the fan becoming loose and possibly falling.

□Loosen, but do not remove, the set screws (GG) on the collar

on top of the fan-motor assembly (E).

□Align the holes at the bottom of the ball/downrod assembly

(B) with the holes in the collar on top of the fan-motor

assembly (E).

□Carefully insert the hanger pin (JJ) through the holes in

the collar and ball/downrod assembly (B). Be careful not to

jam the hanger pin (JJ) against the wiring inside the ball/

downrod assembly (B).

□Insert the locking pin (KK) through the hole near the end of

the hanger pin (JJ) until it snaps into its locked position.

□Re-tighten the set screws (GG) on the collar on top of the fan

motor assembly (E).

JJ GG

Assembly - Hanging the Fan

Attaching the fan to the electrical

box

NOTE: The mounting bracket (A) is designed to slide into

place on an outlet box with the outlet box screws (NN)

installed.

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “Acceptable

for fan support of 35 lbs. 15.9 kg) or less”, and use screws

provided with the outlet box.

□Loosen the two mounting screws (NN) in the outlet box.

□Pass the 120-Volt supply wires through the center hole in

the mounting bracket (A).

□Slide the mounting bracket (A) on to the mounting screws

(NN) and center the mounting bracket (A) in relation to the

outlet box. If necessary, use leveling washers (not included)

between the slide-on mounting bracket (A) and the outlet

box. The at side of the slide-on mounting bracket (A)

should face toward the outlet box as shown.

□Securely tighten the two mounting screws (NN).

Hanging the fan

□Carefully lift the fan-motor assembly (E) up to the slide-on

mounting bracket (A).

□Seat the hanger ball portion of the ball/downrod assembly

(B) in the mounting bracket socket. Ensure that the tab on

the slide-on mounting bracket (A) socket is properly seated

in the groove in the hanger ball.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de Home Decorators Collection

Home Decorators Collection

Home Decorators Collection CHELTON 46-MDL Manual de usuario

Home Decorators Collection

Home Decorators Collection HERITAGE POINT AM909-CB Manual de usuario

Home Decorators Collection

Home Decorators Collection DIALSTONE AK480-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection BENTLEY III AL14-22-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection TETIA Manual de usuario

Home Decorators Collection

Home Decorators Collection MARLON Manual de usuario

Home Decorators Collection

Home Decorators Collection BETHEL 52-BETL Manual de usuario

Home Decorators Collection

Home Decorators Collection YG583-WH Manual de usuario

Home Decorators Collection

Home Decorators Collection YG658-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection ACWORTH YG623A-MWH Manual de usuario

Home Decorators Collection

Home Decorators Collection PINE MEADOWS 52-ALLE Manual de usuario

Home Decorators Collection

Home Decorators Collection HAYDEN LAKE 59929 Manual de usuario

Home Decorators Collection

Home Decorators Collection FAWNDALE 52020 Manual de usuario

Home Decorators Collection

Home Decorators Collection EMSWELL 52-INCH Manual de usuario

Home Decorators Collection

Home Decorators Collection GAZELLE 51550 Manual de usuario

Home Decorators Collection

Home Decorators Collection BRETTE III AM382D-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection STILLMORE 59203 Manual de usuario

Home Decorators Collection

Home Decorators Collection FREYTON 51503 Manual de usuario

Home Decorators Collection

Home Decorators Collection ALISIO Manual de usuario

Home Decorators Collection

Home Decorators Collection AM909A-MBK Manual de usuario

Home Decorators Collection

Home Decorators Collection LAKE GEORGE AM127-NI Manual de usuario

Home Decorators Collection

Home Decorators Collection TRENTINO II YG475-BN Manual de usuario

Home Decorators Collection

Home Decorators Collection AM589H-EB Manual de usuario

Home Decorators Collection

Home Decorators Collection AM909-NI Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje