Hisense RT33D6AAE Manual de usuario
Model: RT33D6AAE
Owner’ s manual
Compact Double Door Refrigerator
© 2015 Hisense Company Ltd. All Rights Reserved.
All material in this Owner's Manual is the property of Hisense
Company Ltd. and its subsidiaries, and is protected under US and
in any manner, electronic, print, or otherwise, without the prior
or distributed, in whole or in part, in any manner, electronic or
Requests for permission to store, reproduce, transmit or distribute
materials may be made to the following address:
PO Box 3289
Suwanee, GA 30024
Hisense, and any and all other Hisense product names, logos, slogans
or marks are registered trademarks of Hisense Company Ltd. and its
holders.
COPYRIGHT STATEMENT
CAUTION!
This refrigerator contains flammable refrigerant. Avoid damaging the refrigerant
tubing or increasing the risk of a leak when handling, moving and using the refrigerator.
CAUTION:We do not recommend that you use an extension cord with this appliance.
the
the
because
To prevent damage to the refrigerator , do not use sharp tools inside of it to remove ice or
other actions.
Service should ONLY be performed by Hisense-authorized professional Warranty Service Centers.
Use of an extension cord is not recommended,
. 8 Can rack
. 8 Can rack
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Tools you will need:
.8mm socket driver
.cross-shaped screwdriver
Note: Before this step, you should lay the refrigerator
on it’s back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to avoid damaging the cooling pipes at the
rear of the refrigerator.
.Putty knife or thin-blade screwdriver
2. open the screw hole cove and the upper
hinge cover which is at the top right corner of
the refrigerator. upper hinge
cover (right)
1. Stand the refrigerator, open the upper
door and remove the things in the door and
close it.
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver
or a spanner(please support the upper
door with your hand when doing it ).
right upper hinge part
special flange
selftapping screws
5.Remove upper door and place it on
smooth surface with panel upwards.
6. Loose screws used to fix middle hinge
and remove middle hinge. Then turn middle
hinge by 180. Take washer on axis and put
it on another end. Place it well for use.
7. Remove lower door and place panel
upwards on smooth surface.
8. Change screw hole covers on middle
cover plate from left to right (as shown in
figure below).
Front foot fixed board
Self tapping screws
Adjustable bottom feet part
Lower hinge partΰrightα
9. Use the
Screw out lower
8mm
socket driver to
remove lower hinge
part and front foot
fixed board. Then
4.Remove the right upper hinge part and
, thescrew hole cover place them on
smooth surface.
Note: washer may
stick to lower door.
washer
Ajdustable bottom feet
screw hole cover
.7mm wrench
Caution㧦
To avoid to injury yourself and/or property,
we recommend someone assist you during
the door reversal process.
.Ensure the Appliance is unplugged and
empty.
.Following steps are generally
recommended
and adjustable bottom feet, change it to the near
hole site, and then screw up and mount washer.
Changing the door from the right side to the left.
10. Change lower hinge part to left and front
foot fixed board to right and fix them with
screws. Then install adjustable bottom feet
parts.
Lower hinge part (left)
11. move lower
door and adjust its position to align lower
hole(left) site and lower hinge axis. Then
adjust middle hinge and align the middle
hinge axis to the higher (left) hole site. Then
install the middle hinge.
Stand the refrigerator then
Note: washer may
stick to lower door. Washer
12. Move upper door to appropriate position,
adjust upper hinge parts and upper door,
and then fix upper hinge parts by screws.
(Please hold upper door by hand when
installing)
13. Replace and the right upper hinge
Install
cover on the left corner, Replace the screw
hole cover on the right corner.
14.Stand and level the appliance.
NOTE:
Before the appliance is powered, We
recommend that you should wait for about
.
2 hours
Tabla de contenidos
Otros manuales de Refrigerador de Hisense
Hisense
Hisense RF632N4WFE Instrucciones de montaje
Hisense
Hisense HR6VFF280SD Instrucciones de montaje
Hisense
Hisense RB327N4BBE Instrucciones de montaje
Hisense
Hisense RQ563N4SI2 Instrucciones de montaje
Hisense
Hisense BCD-720WP1BF1Z9/HC1(H) Manual de usuario
Hisense
Hisense LCT33D6ABE Manual de usuario
Hisense
Hisense RS-34WC4SIA/CSA2 Instrucciones de montaje
Hisense
Hisense RS700N4AWBUI Instrucciones de montaje
Hisense
Hisense MQ79394FFS Instrucciones de montaje
Hisense
Hisense RB403N4EW1 Instrucciones de montaje
Hisense
Hisense FV306N4CW2 Instrucciones de montaje
Hisense
Hisense HRM260N6TSE Instrucciones de montaje
Hisense
Hisense RB335N4WB1 Instrucciones de montaje
Hisense
Hisense RQ768N4GBE Instrucciones de montaje
Hisense
Hisense RS840N4WCF Instrucciones de montaje
Hisense
Hisense RQ515N4AB1 Instrucciones de montaje
Hisense
Hisense RS741N4WBE Instrucciones de montaje
Hisense
Hisense RS-36DR series Manual de usuario
Hisense
Hisense BCD-560 Instrucciones de montaje
Hisense
Hisense HRF208N6BSE Manual de usuario
