Hioki MICRO HiCORDER 8206-10 Manual de usuario

8206-10

MICRO HiCORDER

July 2013 Revised edition 8 8206B981-08 13-07H

Instruction Manual

Contents

Introduction i

Inspection ii

Safety Notes iii

Notes on Use vi

Chapter Summary viii

Chapter 1 Product Overview 1

1.1 Product Overview 2

1.2 Features 3

1.3 Front Panel 4

1.4 LCD (Display) 6

1.5 Printout Information 7

Chapter 2 Measurement Procedures 9

2.1 Preparations 9

2.2 AC Voltage Measurement 13

2.3 AC Current Measurement 17

2.4 AC Voltage and Current Measurement 21

2.5 Common Measurement Operations 26

Chapter 3 Changing the Recording Paper 31

3.1 Opening and Closing the Printer Cover 31

3.2 Installing Recording Paper 32

Chapter 4 Specifications 33

4.1 General Specifications 33

4.2 Voltage Measurement Input Specifications 35

4.3 Current Measurement Input Specifications 36

4.4 Display Specifications 37

4.5 Recorded Information 38

4.6 Recording Time 38

Chapter 5 Maintenance and Service 39

5.1 Storage Precautions 39

5.2 Cleaning 40

5.3 Cleaning the Printer Head 41

5.4 Service 42

_____________________________________________________________________

Introduction

______________________________________________________________

Introduction

Thank you for purchasing the Hioki 8206-10 MICRO

HiCORDER. To obtain maximum performance from the

instrument, please read this manual first, and keep it handy

for future reference.

_____________________________________________________________________

Inspection

______________________________________________________________

NOTE Before using the instrument, make sure that the insulation on the

connection cords is undamaged and that no bare conductors are

improperly exposed. Using the instrument in such conditions

could cause an electric shock, so contact your dealer or Hioki

representative for repair.

Ins

ection

When you receive the instrument, inspect it carefully to

ensure that no damage occurred during shipping. In

particular, check the accessories, panel switches, and

connectors. If damage is evident, or if it fails to operate

according to the specifications, contact your dealer or Hioki

representative.

Accessories

9344 CARRYING CASE 1

L9257 CONNECTOR CORD 1

9235 RECORDING PAPER (15 m) 1

Roll Paper Spools 2

AC Power Cord 1

Instruction Manual 1

Options

9235 RECORDING PAPER (15 m, 10 rolls) 1

9236-01 RECORDING PAPER

(15 m, Climate-resistant; 10 rolls) 1

9650 CLAMP ON SENSOR 1

9651 CLAMP ON SENSOR 1

9668 CLAMP ON SENSOR 1

Before using the instrument the first time, verify that it

operates normally to ensure that the no damage occurred

during storage or shipping. If you find any damage, contact

your dealer or Hioki representative.

iii

_____________________________________________________________________

Safety Notes

______________________________________________________________

DANGE

This instrument is designed to conform to IEC 61010

Safety Standards, and has been thoroughly tested for

safety prior to shipment. However, mishandling

during use could result in injury or death, as well as

damage to the instrument. Be certain that you

understand the instructions and precautions in the

manual before use. We disclaim any responsibility for

accidents or injuries not resulting directly from

product defects.

Safety Symbols

The symbol printed on the instrument indicates that

the user should refer to a corresponding topic in the

manual (marked with the symbol) before using the

relevant function.

In the manual, the symbol indicates particularly

important information that the user should read before

using the instrument.

Indicates a grounding terminal.

Indicates DC (Direct Current).

Indicates AC (Alternating Current).

Indicates both DC (Direct Current) and AC (Alternating

Current).

Indicates the ON side of the power switch.

Indicates the OFF side of the power switch.

Safet

Notes

This manual contains information and warnings essential

for safe operation of the instrument and for maintaining it

in safe operating condition. Before using the instrument,

be sure to carefully read the following safety notes.

_____________________________________________________________________

Safety Notes

______________________________________________________________

DANGE

Indicates that incorrect operation presents an extreme

hazard that could result in serious injury or death to

the user.

ARNING

Indicates that incorrect operation presents a

significant hazard that could result in serious injury or

death to the user.

CAUTION Indicates that incorrect operation presents a

possibility of injury to the user or damage to the

instrument.

NOTE Advisory items related to performance or correct

operation of the instrument.

f.s. (maximum display or scale value, or length of scale)

Signifies the maximum display (scale) value or the length

of the scale (in cases where the scale consists of unequal

increments or where the maximum value cannot be

defined).

In general, this is the range value (the value written on

the range selector or equivalent) currently in use.

The following symbols in this manual indicate the relative

importance of cautions and warnings.

Accuracy

We define measurement tolerances in terms of f.s. (full

scale) values, with the following meanings:

_____________________________________________________________________

Safety Notes

______________________________________________________________

CATII Primary electrical circuits in equipment connected to an

AC electrical outlet by a power cord (portable tools,

household appliances, etc.)

CAT II covers directly measuring electrical outlet

receptacles.

CATIII Primary electrical circuits of heavy equipment (fixed

installations) connected directly to the distribution panel,

and feeders from the distribution panel to outlets.

CATIV The circuit from the service drop to the service entrance,

and to the power meter and primary overcurrent

protection device (distribution panel).

Measurement categories

This instrument complies with CAT III safety requirements.

To ensure safe operation of measurement instruments, IEC

61010 establishes safety standards for various electrical

environments, categorized as CAT II to CAT IV, and called

measurement categories. These are defined as follows.

Using a measurement instrument in an environment

designated with a higher-numbered category than that for

which the instrument is rated could result in a severe

accident, and must be carefully avoided.

Use of a measurement instrument that is not CAT-rated in

CAT II to CAT IV measurement applications could result in

a severe accident, and must be carefully avoided.

_____________________________________________________________________

Notes on Use

______________________________________________________________

DANGE

The maximum input voltage is 600 V DC/AC. Attempting

to measure voltage in excess of the maximum input

voltage could destroy the instrument and result in

personal injure or death.

The maximum rated voltage between input terminals

and ground is 600 Vrms. Attempting to measure

voltages exceeding 600 V with respect to ground could

damage the instrument and result in personal injury.

Connection cords or clamp-on sensor should be made

only at the secondary side of a breaker, so the breaker

can prevent an accident if a short circuit occurs.

Connections should never be made to the primary side

of a breaker, because unrestricted current flow could

cause a serious accident if a short circuit occurs.

To avoid short circuits and potentially life-threatening

hazards, never attach the clamp to a circuit that

operates at more than the maximum rated voltage, or

over bare conductors.

WARNING

To avoid electric shock, do not allow the instrument to

get wet, and do not use it when your hands are wet.

To avoid electric accidents and to maintain the safety

specifications of this instrument, connect the power

cord provided only to a 3-contact (two-conductor +

ground) outlet.

To avoid electric shock when measuring live lines,

wear appropriate protective gear, such as insulated

rubber gloves, boots and a safety helmet.

Do not use the product where it may be exposed to

corrosive or combustible gases. The product may be

damaged or cause an explosion.

Notes on Use

Follow these precautions to ensure safe operation and to

obtain the full benefits of the various functions.

Tabla de contenidos

Otros manuales de Registrador de datos de Hioki

Hioki

Hioki LR5092-20 Manual de usuario

Hioki

Hioki LR5051 Manual de usuario

Hioki

Hioki LR5041 Manual de usuario

Hioki

Hioki HiCORDER MR8880 Manual de usuario

Hioki

Hioki PW3365 Manual de usuario

Hioki

Hioki LR8450 Manual de usuario

Hioki

Hioki LR8450 Manual de instrucciones

Hioki

Hioki 3910-20 Manual de usuario

Hioki

Hioki LR8400-20 Manual de usuario

Hioki

Hioki LR8401-20 Manual de usuario

Hioki

Hioki HiLogger 3145-20 Manual de usuario

Hioki

Hioki HiLogger 3145-20 Manual de usuario

Hioki

Hioki LR5051 Manual de usuario

Hioki

Hioki LR8520 Manual de usuario

Hioki

Hioki LR5011 Manual de usuario

Hioki

Hioki 3640-20 Manual de usuario

Hioki

Hioki LR5092-20 Manual de usuario

Hioki

Hioki lr5001 Manual de usuario

Hioki

Hioki LR8431-20 Manual de usuario

Hioki

Hioki LR8410-20 Manual de usuario

Hioki

Hioki 8423 Manual de usuario

Hioki

Hioki 3638-20 Manual de usuario

Hioki

Hioki Hioki Manual de instrucciones

Hioki

Hioki LR8432-20 Manual de usuario

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

MadgeTech

MadgeTech PRTemp140 Hoja de especificaciones

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario