HIK VISION DS-3E1 P Series Manual de usuario
100 Mbps PoE Switch
Quick Start Guide
UD18592B
Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instrucons for using and managing the
Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change,
without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the Hikvision website
( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of
professionals trained in supporng the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of
their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
ii
Regulatory
FCC
Please take that changes or not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
manual, may cause harmful interference to radio
of this equipment in a
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
FCC
This device complies with part 15 of the FCC Rules. is
subject to the following two
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired
EU Conformity Statement
This product and - if applicable - the supplied accessories
too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under
the EMC 2014/30/EU, the RoHS 2011/
65/EU.
2012/19/EU (WEEE Products marked with this
symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated
points. For more see:
www.recyclethis.info .
2006/66/EC This product contains a
that cannot be disposed of as unsorted municipal
waste in the European Union. See the product
for The
is marked with this symbol, which may include
to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the to your
supplier or to a designated point. For more
see: .
iii
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
iv
Preface
Applicable Models
This manual is applicable to DS-3E1XXXP series switches.
Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
v
Safety Instrucon
Danger
•This is a class A product and may cause radio interference in
which case the user may be required to take adequate
measures.
•Ensure that your devices powered via the PoE port have their
shells protected and re-proofed, because the switches are not
compliant with the Limited Power Source (LPS) standard.
•In the use of the product, you must be in strict compliance with
the electrical safety regulaons of the naon and region.
•The socket-outlet shall be installed near the device and shall be
easily accessible.
•The device must be connected to an earthed mains socket-
outlet.
•Install the device according to the instrucons in this manual.
• indicates hazardous live and the external wiring connected
to the terminals requires installaon by an instructed person.
•Keep body parts away from fan blades. Disconnect the power
source during servicing.
•Never place the device in an unstable locaon. The device may
fall, causing serious personal injury or death.
•This device is not suitable for use in locaons where children
are likely to be present.
•CAUTION: Risk of explosion if the baery is replaced by an
incorrect type.
•Improper replacement of the baery with an incorrect type
may defeat a safeguard (for example, in the case of some
lithium baery types).
•Do not dispose of the baery into re or a hot oven, or
mechanically crush or cut the baery, which may result in an
explosion.
•Do not leave the baery in an extremely high temperature
surrounding environment, which may result in an explosion or
the leakage of ammable liquid or gas.
•Do not subject the baery to extremely low air pressure, which
may result in an explosion or the leakage of ammable liquid
or gas. Dispose of used baeries according to the instrucons.
Cauon
•CAUTION: Double pole/Neutral fusing. Aer operaon of the
fuse, parts of the device that remain energized might represent
a hazard during servicing.
•The device has been designed, when required, modied for
connecon to an IT power distribuon system.
•This device is suitable for mounng on concrete or other non-
combusble surface only.
•The venlaon should not be impeded by covering the
venlaon openings with items, such as newspapers, table-
cloths, curtains, etc. The openings shall never be blocked by
placing the device on a bed, sofa, rug or other similar surface.
vi
•No naked ame sources, such as lighted candles, should be
placed on the device.
•The device shall not be exposed to dripping or splashing and
that no objects lled with liquids, such as vases, shall be placed
on the device.
•Burned ngers when handling the cover area of the device.
Wait one-half hour aer switching o before handling the
parts.
•CLASS 1 LASER PRODUCT
vii
1 Introducon
1.1 Product Introducon
DS-3E1XXXP series switches (hereinaer referred to as "the
device") are layer 2 PoE switches, providing advanced PoE power
supply technology on the basis of high-performance access. The
switches support client management, network topology
management, link aggregaon, port management and so on. The
switches are suitable for small-scale LAN device access.
1.2 Packing List
DS-3E1X05/09P Series DS-3E1318/26P Series
Switch × 1 × 1
Power Adapter × 1 -
AC Power Cord × 1 × 1
Screw - × 4
L-Shaped Bracket - × 2
Quick Start Guide × 1 × 1
1.3 Appearance
Dierent models of devices may have dierent appearances. The
following pictures are only for illustraon.
Front Panel
Figure 1-1 DS-3E1105P Series
Note
The front panel of DS-3E1309P switch is similar to that of
DS-3E1105P, with dierences on 8 100Mbps PoE RJ45 ports, and
that No.9 port is gigabit RJ45 port.
Figure 1-2 DS-3E1318P Series
Note
The front panel of DS-3E1326P switch is similar to that of
DS-3E1318P, with dierences on 24 100Mbps PoE RJ45 ports, 24
LINK/ACT, and 24 PoE indicators.
1
Rear Panel
Figure 1-3 DS-3E1X05/09P Series
Figure 1-4 DS-3E1318/26P Series
Port/Indicator Descripon
Indicator/Port Descripon
PoE-MAX Indicator
•Solid /Flashing: The output power of the switch
will reach the upper limit. The power supply may
be abnormal if more devices are connected.
•Unlit: The switch provides power supply to PD
normally.
PWR Indicator
•Solid: The switch is powered on normally.
•Unlit: No power supply connected or power
supply is abnormal.
LINK/ACT Indicator
•Solid: The port is connected.
•Flashing: The port is transming data.
•Unlit: The port is disconnected or connecon is
abnormal.
PoE Indicator
•Solid: The switch provides power supply to PD
normally.
•Unlit: The switch is disconnected to PD, or
provides power supply to PD abnormally.
G1/G2 Port
Indicator
•Solid: The gigabit SFP ber opcal port is
connected.
•Flashing: The gigabit SFP ber opcal port is
transming data.
•Unlit: No gigabit SFP ber opcal port connected
or connecon is abnormal.
100Mbps PoE RJ45
Port Used for PD devices connecon via network cables.
100Mbps RJ45 Port Used for other devices connecon via network
cables.
Gigabit Combo
•When connected to a network cable, the combo
is a RJ45 port. When plugged into with an opcal
module and connected to an opcal ber, the
combo funcons as a ber opc port.
•When connected to both the network cable and
opcal ber at the same me, the port works as a
ber opc port.
2
Otros manuales para DS-3E1 P Series
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Cambiar de HIK VISION
HIK VISION
HIK VISION DS-3E0109P-E Manual de usuario
HIK VISION
HIK VISION 0300P Series Manual de usuario
HIK VISION
HIK VISION DS-3E1X05P Series Manual de usuario
HIK VISION
HIK VISION DS-3E2528B Manual de usuario
HIK VISION
HIK VISION DS-3E05 Series Manual de usuario
HIK VISION
HIK VISION DS-3E2300P Series Manual de usuario
HIK VISION
HIK VISION DS-3E1 P Series Manual de usuario
HIK VISION
HIK VISION DS-3E13XXP-SI Series Manual de usuario
HIK VISION
HIK VISION DS-3E0318P-E/M Manual de usuario
HIK VISION
HIK VISION DS-3E1510P Manual de usuario
HIK VISION
HIK VISION DS-3E1526P-EI Manual de usuario
HIK VISION
HIK VISION DS-3E1326P-EI Manual de usuario
HIK VISION
HIK VISION DS-3E03 P Series Manual de usuario
HIK VISION
HIK VISION DS-3T1310P-SI/HS Manual de usuario
HIK VISION
HIK VISION DS-3D2208P Manual
HIK VISION
HIK VISION DS-3WF01C-2N Manual de usuario
HIK VISION
HIK VISION DS-3T3512P Manual de usuario
HIK VISION
HIK VISION DS-3TXX06HP-E Series Manual de usuario
HIK VISION
HIK VISION DS-3E2510P Manual de usuario
HIK VISION
HIK VISION DS-3E2300P Series Manual de usuario
