HIK VISION Ids-mcd202-b Manual de usuario

Network Portable IR Speed Dome

Quick Start Guide

English

reserved.

About this Manual

The Manual includes instructions for using and managing the Product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the Manual

is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals

trained in supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the

properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their

respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS

MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL

FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,

INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR

LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING

NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH

THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR

INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY

RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR

OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,

English

VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE

LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR

USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT

LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR

DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE

THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL

WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

English

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the

EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS

Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste

in the European Union. For proper recycling, return this

product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a

battery that cannot be disposed of as unsorted municipal

waste in the European Union. See the product

documentation for specific battery information. The battery

is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your supplier or to a designated collection point. For

more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Safety Instructions

Use of the product must be in strict compliance with the local laws and

regulations. Please shut down the device in prohibited area.

Use of the product must be in strict compliance with the local electrical

safety regulations.

Use the power adapter provided by qualified manufacturer. Refer to the

product specification for detailed power requirements.

It is recommended to provide independent power adapter for each

device as adapter overload may cause over-heating or a fire hazard.

Make sure that the power has been disconnected before you wire,

English

install, or disassemble the device in the authorized way according to the

description in the manual.

To avoid electric shock, DO NOT directly touch exposed contacts and

components once the device is powered up.

DO NOT use damaged power supply devices (e.g., cable, power adapter,

etc.) to avoid electric shock, fire hazard, and explosion.

DO NOT directly cut the power supply to shut down the device. Please

shut down the device normally and then unplug the power cord to avoid

data loss.

The socket-outlet shall be installed near the equipment and shall be

easily accessible.

Make sure the power supply has been disconnected if the power

adapter is idle.

Connect to earth before connecting to the power supply.

To avoid heat accumulation, good ventilation is required for a proper

operating environment.

Store the device in dry, well-ventilated, corrosive-gas-free, no direct

sunlight, and no heating source environment.

Avoid fire, water, and explosive environment when using the device.

Install the device in such a way that lightning strikes can be avoided.

Provide a surge suppressor at the inlet opening of the equipment under

special conditions such as the mountain top, iron tower, and forest.

Keep the device away from magnetic interference.

Avoid device installation on vibratory surfaces or places. Failure to

comply with this may cause device damage.

DO NOT touch the heat dissipation component to avoid burns.

DO NOT expose the device to extremely hot, cold, or humidity

environments. For temperature and humidity requirements, see device

specification.

No naked flame sources, such as lighted candles, should be placed on

the equipment.

DO NOT touch the sharp edges or corners.

To prevent possible hearing damage, DO NOT listen at high volume

levels for long periods.

If smoke, odor, or noise arises from the device, immediately turn off the

English

power, unplug the power cable, and contact the service center.

If the device cannot work properly, contact the store you purchased it or

the nearest service center. DO NOT disassemble or modify the device in

the unauthorized way (For the problems caused by unauthorized

modification or maintenance, the company shall not take any

responsibility).

Keep all packaging after unpacking them for future use. In case of any

failure occurred, you need to return the device to the factory with the

original packaging. Transportation without the original packaging may

result in damage to the device and the company shall not take any

responsibility.

Please enforce the protection for the personal information and the data

security as the device may be confronted with the network security

problems when it is connected to the Internet. Contact us if network

security risks occur.

Please understand that you have the responsibility to configure all the

passwords and other security settings about the device, and keep your

user name and password.

DO NOT touch the lens with fingers directly in case the acidic sweat of

the fingers erodes the surface coating of the lens.

DO NOT aim the lens at the strong light such as sun or incandescent

lamp. The strong light can cause fatal damage to the device.

DO NOT disconnect the power during formatting, uploading, and

downloading. Or files may be damaged.

DO NOT charge the battery continuously more than one week.

Overcharging may shorten the battery life.

Battery will discharge gradually if it is not used for a long time. It must be

recharged before using.

If the device contains dismountable battery, store the device and battery

separately if it is not used.

The battery must be charged and discharged every three months if it is

not used, and recharged to 60% to 70% power percentage to store.

The scrapped battery should be discarded in compliance with the local

laws and regulations. If there are no corresponding laws or regulations,

throw it in a hazardous trash can.

English

DO NOT pierce the battery or shorten the electrodes, or it may cause

explosion or fire hazard.

DO NOT dispose of the battery into fire or a hot oven, or mechanically

crush or cut the battery, which may result in an explosion.

CAUTION: Please use the specific battery supported by the device, or it

may cause explosion. If the battery is damaged and needs to be

changed, contact the device manufacturer or local distributor.

If the device contains button battery, keep it far away from children.

DO NOT expose the battery pack or battery combination to sunlight, fire,

or similar overheated environment. DO NOT leave the battery in an

extremely high temperature surrounding environment or subject the

battery to extremely low air pressure, which may result in an explosion

or the leakage of flammable liquid or gas.

Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it

away from children.

English

Interface Overview

Interface appearances and positions may vary with different models.

Please refer to the actual devices.

Interface

Description

Interface

Description

IR LED

(Optional) 9-PIN

aviation plug

Lens

10-PIN aviation plug

OLED screen

Magnet

ON/OFF switch

TF card slot

SIM card slot

Safety rope ring

English

Interface

Description

Interface

Description

Main aviation

connector

Network

interface

Serial

interface

Power cord

Sub aviation

connector

Reserved

RS-485

interface

Alarm

interface

Audio

interface

Installation

Install SIM Card

English

Mount Tripod

Mount Portable Speed Dome on Vehicle Roof

Never place the equipment in an unstable location. The equipment may

fall, causing serious personal injury or death. Install safety protection

equipment if necessary. Check regularly.

Device appearances and installation methods may vary with different

models. Here we take one type of device appearance as an example to

show the installation. Please refer to actual devices for more details.

Tabla de contenidos

Otros manuales de Cámara de seguridad de HIK VISION

HIK VISION

HIK VISION Turbo HD DS-2AE5232T-A3 Manual de usuario

HIK VISION

HIK VISION D7T Series Manual de usuario

HIK VISION

HIK VISION E-series Manual de usuario

HIK VISION

HIK VISION DS-2CE16H0T-ITE Manual de usuario

HIK VISION

HIK VISION DS-2DE2A204IW-DE3(C0)(S6) Manual de usuario

HIK VISION

HIK VISION Mini Analog Speed Dome Manual de usuario

HIK VISION

HIK VISION DS-2TXS2628-7P/QA/GLT/CH30S80 Manual de usuario

HIK VISION

HIK VISION DS-T1 SERIES Manual de instrucciones

HIK VISION

HIK VISION DS-2CD783F-EI Manual de usuario

HIK VISION

HIK VISION AE-VC136T Manual de usuario

HIK VISION

HIK VISION DS-2CE56D8T-IT3F Manual de usuario

HIK VISION

HIK VISION DS-2CC12D8T-AMM Manual de usuario

HIK VISION

HIK VISION DS-2CD1043G0E-I Manual de usuario

HIK VISION

HIK VISION DS-2DE2103 Manual de usuario

HIK VISION

HIK VISION UD.6L0201B1907A01 Manual de usuario

HIK VISION

HIK VISION DS-2DE3204W-DE Manual de usuario

HIK VISION

HIK VISION DS-2CE10HFT-F28 Manual de usuario

HIK VISION

HIK VISION DS-2CD2712F-I Guía del usuario

HIK VISION

HIK VISION ud21713b Manual de usuario

HIK VISION

HIK VISION DS2CD726F-PT(W) Manual de usuario

HIK VISION

HIK VISION IPC-T1**-I Manual de usuario

HIK VISION

HIK VISION DS-2CE16H1T-IT Manual de usuario

HIK VISION

HIK VISION DS-2CE56D1T-IRM Manual de usuario

HIK VISION

HIK VISION DS-2DF6C431-CX(T5/316L) Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

HIK VISION ids-mcd202-b Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas