HIK VISION DS-2CE17H0T-IT3F Manual de usuario

DS-2CE17H0T-IT3F

Bullet Camera

User Manual

UM DS-2CE17H0T-IT3F 052220NA 2

Thank you for purcha ing our product. If there are

any que tion or reque t , do not he itate to

contact the dealer.

Thi manual applie to the following model:

Model

2CE17H0T

Thi manual may contain technical mi take or

printing error , and the content i ubject to

change without notice. Update will be added to

new ver ion of thi manual. We will readily improve

or update the product or procedure de cribed in

the manual.

Regulatory Information

FCC Information

Plea e take attention that change or modification

not expre ly approved by the party re pon ible for

compliance could void the u er’ authority to

operate the equipment.

FCC Compliance: Thi equipment ha been te ted

and found to comply with the limit for a Cla A

digital device, pur uant to part 15 of the FCC Rule .

The e limit are de igned to provide rea onable

protection again t harmful interference when the

equipment i operated in a commercial

environment. Thi equipment generate , u e , and

can radiate radio frequency energy and, if not

in talled and u ed in accordance with the

in truction manual, may cau e harmful interference

to radio communication . Operation of thi

equipment in a re idential area i likely to cau e

harmful interference, in which ca e the u er will be

required to correct the interference at hi own

expen e.

FCC Conditions

Thi device complie with part 15 of the FCC Rule .

Operation i ubject to the following condition :

Thi device may not cau e harmful interference.

Thi device mu t accept any interference

received, including interference that may cau e

unde ired operation.

EU Conformity Statement

Thi product and, if applicable, the upplied

acce orie too are marked with “CE” and

comply therefore with the applicable

harmonized European tandard li ted under

the Low Voltage Directive 2014/35/EU, the

EMC Directive 2014/30/EU.

UM DS-2CE17H0T-IT3F 052220NA 3

2012 19 EU (WEEE Directive): Product marked

with thi ymbol cannot be di po ed of a

un orted municipal wa te in the European

Union. For proper recycling, return thi product

to your local upplier upon the purcha e of

equivalent new equipment, or di po e of it at

de ignated collection point . For more

information ee: www.recyclethi .info.

2006 66 EC (Battery Directive): Thi product

contain a battery that cannot be di po ed

of a un orted municipal wa te in the

European Union. See the product

documentation for pecific battery

information. The battery i marked with thi

ymbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery

to your upplier or to a de ignated collection

point. For more information, ee:

www.recyclethi .info.

Industry Canada ICES-003 Compliance

Thi device meet the CAN ICES-3 (A)/NMB-3(A)

tandard requirement .

Warning

Thi i a cla A product. In a dome tic environment

thi product may cau e radio interference, in which

ca e the u er may be required to take adequate

mea ure .

Safety Instruction

The e in truction are intended to en ure that the

u er can u e the product correctly to avoid danger

or property lo .

The precaution mea ure i divided into “Warning ”

and “Caution .”

Warnings: Seriou injury or death may occur if any

of the warning are neglected.

Cautions: Injury or equipment damage may occur if

any of the caution are neglected.

Warnings

Follow the e

afeguard to prevent

eriou injury or death.

Cautions

Follow the e

precaution to prevent

potential injury or

material damage.

UM DS-2CE17H0T-IT3F 052220NA 4

Warnings

In the u e of the device, you mu t be in trict

compliance with the electrical afety regulation

of the nation and region.

Input voltage hould meet both the SELV (Safety

Extra Low Voltage) and the Limited Power Source

with 12 VDC according to the IEC60950-1

tandard and IEC62368-1 tandard. Refer to

technical pecification for detailed information.

Do not connect multiple device to one power

adapter to avoid overheating or a fire hazard

cau ed by overload.

Make ure that the plug i firmly connected to

the power ocket.

Make ure that the device i firmly fixed if wall

mounting or ceiling mounting i adopted.

If moke, odor, or noi e ri e from the device, turn

off the power at once, unplug the power cord,

and then contact the ervice center.

Unprofe ional per onnel hould never attempt

to di a emble the camera.

Cautions

Do not drop camera or ubject it to phy ical

hock.

Do not touch en or module with finger .

Do not place the camera in extremely hot, cold

(the operating temperature hall be -40° to 60°

C), du ty, or damp location , and do not expo e it

to high electromagnetic radiation.

If cleaning i nece ary, u e a clean cloth with a

bit of ethanol, and wipe it gently.

Do not aim the camera at the un or extra bright

place .

The en or may be burned out by a la er beam,

o if any la er equipment i in u e, make ure

that the urface of the en or will not be

expo ed to the la er beam.

To avoid heat accumulation, good ventilation i

required for the operating environment.

Keep the camera away from liquid while in u e for

non-waterproof device.

While in delivery, pack the camera in it original

packing or packing of the ame material.

UM DS-2CE17H0T-IT3F 052220NA 5

Contents

1 Introduction ........................................................ 6

1.1 Product Feature ....................................................... 6

1.2 Overview ...................................................................... 6

2 Installation ......................................................... 6

2.1 Ceiling/Wall Mounting without Junction Box ......... 7

2.2 Ceiling/Wall Mounting with Junction Box ............... 8

3 Menu Description ................................................ 9

3.1 Video Format ............................................................. 11

3.2 Expo ure .................................................................... 11

3.3 DAY/NIGHT ................................................................. 12

3.4 VIDEO SETTINGS ......................................................... 14

UM DS-2CE17H0T-IT3F 052220NA 6

1Introduction

Product Features

The main feature are a follow :

High Performance CMOS Sen or

OSD Menu with Configurable Parameter

Smart IR

3-Axi Adju tment

Overview

Figure 1, Camera Overview

NOTE: Pre and hold the witch button for five

econd to witch the video output. Four

kind of video output are available: TVI,

AHD, CVI, and CVBS.

2Installation

Before You Start

Make ure that the device in the package i in

good condition and all the a embly part are

included.

Make ure that all the related equipment i

powered off during the in tallation.

Check the pecification of the product for the

in tallation environment.

Check whether the power upply i matched with

your power output to avoid the damage.

Make ure the wall i trong enough to with tand

three time the weight of the camera and the

mount.

If the product doe not function properly,

contact your dealer or the neare t ervice

center. Do NOT di a emble the camera for repair

or maintenance your elf.

Power Cord

Video Cable

Bracket

Main Body

UM DS-2CE17H0T-IT3F 052220NA 7

Ceiling Wall Mounting without Junction Box

Before You Start

Ceiling mounting and wall mounting are imilar. The

following tep u e ceiling mounting a an

example.

1. (Optional) For a concrete ceiling, drill the

crew hole with a 5.5 mm drill, and in ert the

upplied wall plug .

2. (Optional) Drill the cable hole if the cable are

routed through the ceiling.

3. Align the crew hole in the bracket to the

ceiling, and ecure the camera with three PA4

× 25 crew ( upplied).

Figure 2, Secure the Camera on the Ceiling

4. Connect the power cord and video cable.

5. Power on the camera to check if the image on

the monitor i at an optimum angle. If not,

adju t the camera according to the figure

below.

Figure 3, 3-Axi Adju tment

1) Loo en the trim ring to adju t the pan

po ition [0° to 360°].

2) Loo en crew A to adju t the tilt po ition

[0° to 180°].

3) Loo en crew B to adju t the rotation

po ition [0° to 360°].

6. Turn the trim ring clockwi e and tighten

crew A and B to fini h in tallation.

Rotation Position

[0° to 360°] ilt Position

[0° to 180°]

iti

[0° to 360°]

rim Ring

Screw A

Screw B

UM DS-2CE17H0T-IT3F 052220NA 8

Ceiling Wall Mounting with Junction Box

Before You Start

You need to purcha e a junction box in advance.

Ceiling mounting and wall mounting are imilar. The

following tep take wall mounting a an example.

1. Pa te the junction box drill template where

you want to in tall the camera.

2. (Optional) For a concrete wall, drill the crew

hole with a 5.5 mm drill, and in ert the

upplied wall plug .

Figure 4, Junction Box Drill Template

3. (Optional) Drill the cable hole if the cable are

routed through the wall.

4. Di a emble the junction box.

5. Align the crew hole of the camera with

tho e on the junction box cover. Attach the

camera to the junction box cover with three

PM4 × 10 crew .

Figure 5, Attach Camera to Junction Box Cover

6. Secure the junction box body onto the wall

with three PA4 × 25 crew ( upplied).

UM DS-2CE17H0T-IT3F 052220NA 9

Figure 6, Secure Junction Box to the Wall

7. Route the cable through the bottom cable

hole or ide cable hole of the junction box and

connect the cable .

8. Affix the junction box cover to it body with

three PM3 × 16 L6 crew that come with the

junction box.

Figure 7, Affix Junction Box Cover to it Body

9. Repeat tep 5 to 6 of 2.1 Ceiling/Wall

Mounting without Junction Box to fini h the

in tallation.

3Menu Description

Plea e follow the tep below to call the menu.

NOTE: The actual di play may vary by camera

model.

1. Connect the camera to the TVI DVR and the

monitor a hown below.

UM DS-2CE17H0T-IT3F 052220NA 10

Figure 8, Connection

2. Power on the analog camera, TVI DVR, and the

monitor to view the image on the monitor.

3. Click PTZ Control to enter the PTZ Control

interface.

4. Call the camera menu by clicking the

button or calling pre et No. 95.

Figure 9, Main Menu Overview

5. Click the direction arrow to control the

camera.

1) Click up/down direction button to elect

the item.

2) Click Iris+ to confirm the election.

3) Click left/right direction button to adju t

the value of the elected item.

Tabla de contenidos

Otros manuales de Cámara de seguridad de HIK VISION

HIK VISION

HIK VISION DS-2DF1-574D Manual de usuario

HIK VISION

HIK VISION AP530HT Manual de usuario

HIK VISION

HIK VISION DS2DE2204IW Manual de usuario

HIK VISION

HIK VISION DS-2CE16C5T-AVFIR3 TURBO HD Manual de usuario

HIK VISION

HIK VISION DS-2CE16D9T-AIRAZH Manual de usuario

HIK VISION

HIK VISION ColorVu DS-2CE12KF3T-E Manual de usuario

HIK VISION

HIK VISION DS-2DYH2A0IXS-D Manual de usuario

HIK VISION

HIK VISION DS-2CD2686G2-IZS Manual de usuario

HIK VISION

HIK VISION DS-2TD1228T-2/QA Manual de usuario

HIK VISION

HIK VISION ud21713b Manual de usuario

HIK VISION

HIK VISION DS-2PT3326IZ Manual de usuario

HIK VISION

HIK VISION DS-2CE18D0T-LFS Manual de usuario

HIK VISION

HIK VISION DS-2CE56D0T-IRP Manual de usuario

HIK VISION

HIK VISION HiLook THC-B129-LPS Manual de usuario

HIK VISION

HIK VISION DS-2CD2746G2T-IZS Manual de usuario

HIK VISION

HIK VISION DS-2CE56D0T-IRMMF Manual de usuario

HIK VISION

HIK VISION Ezviz ez360 Series Manual de usuario

HIK VISION

HIK VISION UD02330B Manual de usuario

HIK VISION

HIK VISION AE-VC224T-IT Manual de usuario

HIK VISION

HIK VISION U1T Series Manual de usuario

HIK VISION

HIK VISION HiLook IPC-B120H-U Manual de usuario

HIK VISION

HIK VISION DS-2CE12UF3T-E Manual de usuario

HIK VISION

HIK VISION DS-2CE1582N-IR Manual de usuario

HIK VISION

HIK VISION iDS-2CD7 G0 Series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario