HIK VISION DS-2CC52H1T-FITS Manual de usuario

HD Fisheye Camera

User Manual

UD01467B

User Manual

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to the model DS-2CC52H1T-FITS.

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without

notice. The updates will be added to the new version of this

manual. We will readily improve or update the products or

procedures described in the manual.

Privacy Notice

Surveillance laws vary by jurisdiction. Check all relevant laws in

your jurisdiction before using all this product for surveillance

purpose to ensure that your use of this product conforms.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage

Directive 2014/35/EU, the EMC Directive 2014/30/EU.

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more

information see: www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your supplier or to a designated collection

point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

1000001060520

1Introduction

1.1 Product Features

This series of camera adopts high performance sensor and

advanced circuit board design technology. It features high

resolution, low distortion, and low noise, etc. It is suitable for

surveillance system and image process system.

5 Megapixel high-performance CMOS

HD TVI output, up to 5Mega ` resolution

0.01Lux @ (F1.2,AGC ON), 0 Lux with IR

IR cut filter with auto switch

OSD menu

Built-in microphone, 1-ch audio output

1.2 Overview

Camera Body

Photoconductive

Resistance Microphone

Audio Cable (Red)

HD TVI Cable (Gray)

12V DC Power Cable

Lens

Base Plate

2Installation

Before you start:

Please make sure that the device in the package is in good

condition and all the assembly parts are included.

Make sure that all the related equipment is power-off during

the installation.

Check the specification of the products for the installation

environment.

Check whether the power supply is matched with your

required output to avoid damage.

Please make sure the wall is strong enough to withstand three

times the weight of the camera and the mounting.

If the wall is the cement wall, you need to insert expansion

screws before you install the camera. If the wall is the wooden

wall, you can use self-tapping screw to secure the camera.

If the product does not function properly, please contact your

dealer or the nearest service center. Do not disassemble the

camera for repair or maintenance by yourself.

2.1 Ceiling Mounting

Steps:

1. Drill two screw holes and the cable hole according to the

supplied drill template.

φ24

φ102

2-φ3.4

41.75

2. Align the screw holes and cable hole on the drill template and

the base plate, and then fix the base plate to the ceiling with

the two supplied screws.

Ceiling

Base Plate

Notes:

●For cement wall, you need to use the expansion screw to fix the

mount.

●For wooden wall, you can just use the self-tapping screw to fix the

mount.

3. Route the cables through the cable hole or the side opening

according to the actual needs, and connect the corresponding

cables including power cable, network cable, audio and alarm

cables, etc.

4. Align the triangle mark on the camera and base plate, and

then rotate the camera clockwise until it is locked up by the

three bayonet joints on the base plate.

5. To disassemble the camera: Press the Push button on the base

plate, rotate the camera anticlockwise, and then you can

remove the camera from the base plate.

PUSH

6. To adjust the view angle: Rotate the camera body clockwise or

anticlockwise with the base plate, and then you can adjust the

camera to the desired view angle.

15°15°

2.2 Wall Mounting with a Slant Mounting Base

Before you start:

You need to purchase a slant mounting base separately if this

mounting method is selected.

Steps:

1. Drill two screw holes and the cable hole according to the

supplied drill template.

2-26

φ24

φ102

2-φ3.4

41.75

83.5

2. Fix the slant mounting base to the wall with the screws.

Mounting Base

Wall

3. Align the screw holes on the slant mounting base and the base

plate, and then secure the base plate on the slant mounting

base with the two supplied screws.

4. Route the cables through the cable hole or the side opening

according to the actual needs, and connect the corresponding

cables including power cable, network cable, audio and alarm

cables, etc.

5. Align the triangle mark on the camera and mounting base, and

then rotate the camera clockwise until it is locked up.

6. The installation is complete.

7. To disassemble the camera: Press the Push button on the base

plate, rotate the camera anticlockwise, and then you can

remove the camera from the base plate.

PUSH

2.3 Wall Mounting with a Bracket

Before you start:

You need to purchase the bracket separately if this mounting

method is selected.

Steps:

1. Unfasten and remove the screw marked in the figure, and then

disassemble the bracket.

Tabla de contenidos

Otros manuales de Cámara de seguridad de HIK VISION

HIK VISION

HIK VISION DS-2CD2942F-W Manual de usuario

HIK VISION

HIK VISION DS-2CD852F Series Manual de usuario

HIK VISION

HIK VISION Hilook T6 Series Manual de usuario

HIK VISION

HIK VISION ColorVu DS-2CE72DFT-FC Manual de usuario

HIK VISION

HIK VISION DE1A Series Manual de usuario

HIK VISION

HIK VISION EZVIZ Mini Pano Manual de usuario

HIK VISION

HIK VISION DS-2CE56D0T-IRP Manual de usuario

HIK VISION

HIK VISION DS-2XC6285G0-L Manual de usuario

HIK VISION

HIK VISION DS-2XS6A47G1-LS/C36S80 Manual de usuario

HIK VISION

HIK VISION DS-2DE2204IW-DE3/W S6 Manual de usuario

HIK VISION

HIK VISION TURBO HD U7T Series Manual de usuario

HIK VISION

HIK VISION DS-2CE78U7T-IT1F Manual de usuario

HIK VISION

HIK VISION iDS-TCM403-ER/0832 Manual de usuario

HIK VISION

HIK VISION 5 Inch Network High Speed Dome Manual de usuario

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40 Manual de usuario

HIK VISION

HIK VISION DS-2DT6232X-AELY Manual de usuario

HIK VISION

HIK VISION DS-2TD4136T-25 Manual de usuario

HIK VISION

HIK VISION DS-2CE16D1T-IR Manual de usuario

HIK VISION

HIK VISION DS-2CE56D1T-IRM Manual de usuario

HIK VISION

HIK VISION E-series Manual de usuario

HIK VISION

HIK VISION DS-2TD6237-50H4L/W Manual de usuario

HIK VISION

HIK VISION DS-2CD2121G0-IWS/2AX Manual de usuario

HIK VISION

HIK VISION UD04294B Manual de usuario

HIK VISION

HIK VISION DS-2CD8253F-EI(S) Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario