HIK VISION DS-MCW407 Series Manual de usuario
Body Camera
Quick Start Guide
UD18396N
Legal Informaon
About this Manual
The Manual includes instrucons for using and managing the
Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change,
without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the company website
Please use this Manual with the guidance and assistance of
professionals trained in supporng the Product.
Trademarks Acknowledgement
Trademarks and logos menoned are the properes of their
respecve owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. OUR COMPANY MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT
BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL OUR COMPANY
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND OUR COMPANY SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
i
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
ii
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: Please take aenon that changes or
modicaon not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
Note: This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This
product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in
a parcular installaon. If this product does cause harmful
interference to radio or television recepon, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separaon between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the
EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU, the
RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collecon points. For
more informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentaon for specic
iii
baery informaon. The baery is marked with this symbol,
which may include leering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the baery
to your supplier or to a designated collecon point. For more
informaon see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including
interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaon
est autorisée aux deux condions suivantes:
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepble d'en
compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent
émeeur radio peut fonconner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir
le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
iv
Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
v
Safety Instrucon
Laws and Regulaons
Use of the product must be in strict compliance with the local
laws and regulaons. Please shut down the device in prohibited
area.
Power Supply
•Use of the product must be in strict compliance with the local
electrical safety regulaons.
•Use the power adapter provided by qualied manufacturer.
Refer to the product specicaon for detailed power
requirements.
•It is recommended to provide independent power adapter for
each device as adapter overload may cause over-heang or a
re hazard.
•Make sure that the power has been disconnected before you
wire, install, or disassemble the device.
•DO NOT directly touch exposed contacts and components once
the device is powered up to avoid electric shock.
•DO NOT use damaged power supply devices (e.g., cable, power
adapter, etc.) to avoid electric shock, re hazard, and
explosion.
•DO NOT directly cut the power supply to shut down the device.
Please shut down the device normally and then unplug the
power cord to avoid data loss.
•DO NOT block the power supply equipment to plug and unplug
conveniently.
•Make sure the power supply has been disconnected if the
power adapter is idle.
•Make sure the device is connected to the ground rmly.
Transportaon, Use, and Storage
•To avoid heat accumulaon, good venlaon is required for a
proper operang environment.
•Store the device in dry, well-venlated, corrosive-gas-free, no
direct sunlight, and no heang source environment.
•Avoid re, water, and explosive environment when using the
device.
•Avoid lightning strike for device installaon. Install a lightning
arrester if necessary.
•Keep the device away from magnec interference.
•Avoid device installaon on vibratory surface or places, and
avoid equipment installaon on vibratory surface or places
subject to shock (ignorance may cause device damage).
•DO NOT touch the heat dissipaon component to avoid burns.
vi
•DO NOT expose the device to extremely hot, cold, or humidity
environments. For temperature and humidity requirements,
see device specicaon.
•The device can only be safely used in the region below 2000
meters above the sea level.
Maintenance
•If smoke, odor, or noise arises from the device, immediately
turn o the power, unplug the power cable, and contact the
service center.
•If the device is abnormal, contact the store you purchased it or
the nearest service center. DO NOT disassemble or modify the
device in any way (For the problems caused by unauthorized
modicaon or maintenance, the company shall not take any
responsibility).
•Keep all wrappers aer unpacking them for future use. In case
of any failure occurred, you need to return the device to the
factory with the original wrapper. Transportaon without the
original wrapper may result in damage to the device and the
company shall not take any responsibility.
Network
•Please enforce the protecon for the personal informaon and
the data security as the device may be confronted with the
network security problems when it is connected to the
Internet. Please contact us when the device might exist
network security risks.
•Please understand that you have the responsibility to congure
all the passwords and other security sengs about the device,
and keep your user name and password.
Lens
•DO NOT touch the lens with ngers directly in case the acidic
sweat of the ngers erodes the surface coang of the lens.
•DO NOT aim the lens at the strong light such as sun or
incandescent lamp. The strong light can cause fatal damage to
the device.
Screen
Clean the screen with so and dry cloth or other substutes to
wipe the interior and exterior surface. DO NOT use alkaline
detergents. Protect the screen from scratches.
Baery
•DO NOT charge the baery connuously more than one week.
Overcharging may shorten the baery life.
•Baery will discharge gradually if it is not used for a long me.
It must be recharged before using.
•If the device contains dismountable baery, store the device
and baery separately if it is not used.
vii
•The baery must be charged and discharged every three
months if it is not used, and recharged to 60% to 70% power
percentage to store.
•The scrapped baery should be discarded in compliance with
the local laws and regulaons. If there are no corresponding
laws or regulaons, throw it in a hazardous trash can.
•DO NOT pierce the baery or shorten the electrodes, or it may
cause explosion or re hazard.
•DO NOT throw the baery in re or water, or it may cause
explosion.
•Please use the specic baery supported by the device, or it
may cause explosion. If the baery is damaged and needs to
be changed, contact the device manufacturer or local
distributor.
•If the device contains buon baery, keep it far away from
children.
•DO NOT expose the baery pack or baery combinaon to
sunlight, re, or similar overheated environment.
Data
DO NOT disconnect the power during formang, uploading, and
downloading. Or les may be damaged.
Laser
The laser radiaon emied from the device can cause eye
injuries, burning of skin or inammable substances. Before
enabling the Light Supplement funcon, make sure no human or
inammable substances are in front of the laser lens.
viii
1 Product Introducon
1.1 Introducon
Body camera (hereinaer referred to as device) highly integrates
with record, taping, capture, posioning, etc. It is embedded with
posioning module with high sensivity to locate the occurring
posion of events accurately. It can record the process and
condion of events completely via record, taping, and capture.
You can also tag the important data for future search.
It is small and light, convenient to carry, and can be worn on the
shoulder, sasfying the requirement of mobile duty and evidence
record for single person. It is widely applicable to public security
protecon, city management, industry and commerce, etc.
1.2 Key Feature
•HD recording.
•The recorded videos can be uploaded to the central video
plaorm via 4G wireless communicaon.
•Dual posioning modules of GPS and Beidou. The locaon
informaon can be uploaded to the command center in real
me.
•Supports IR night vision. Even in the dark scene, the facial
features of the persons in the scene can be recognized clearly.
•Tri-proof design to support all-weather led operaon.
•Built-in baery with large capacity, supporng longer working
hour.
•Small size, light weight, and convenient to carry.
•Large recording buon for convenient operaon.
1.3 Packing List
Following objects are included in package. If something loses,
contact us or our supplier.
Table 1-1 Packing List
No. Name Quanty
1 Body camera 1
2 Shoulder Clip 1
3 USB data cable 1
4 Charger 1
5 Quick start guide 1
1.4 Appearance
Refer to the gure and table below for the appearance of the
device.
1
Otros manuales para DS-MCW407 Series
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara digital de HIK VISION
HIK VISION
HIK VISION ColorVu DS-2CE DFT-F Series Manual de usuario
HIK VISION
HIK VISION DS-7204HQHI-K1 Manual de usuario
HIK VISION
HIK VISION DS-2CD6825G0 Manual del operador
HIK VISION
HIK VISION UD24041B Manual de usuario
HIK VISION
HIK VISION HF-VS409 Manual de usuario
HIK VISION
HIK VISION DS-2CE10DF8T-F Manual de usuario
HIK VISION
HIK VISION 6825 Manual del operador
HIK VISION
HIK VISION HF-VS409 Manual de usuario
HIK VISION
HIK VISION Casino D8T DS-2CC12D8T-AMM Manual de usuario
HIK VISION
HIK VISION DY7 Series Manual de usuario
HIK VISION
HIK VISION TurboHD H0T Series Manual de usuario
HIK VISION
HIK VISION UD00719B Manual de usuario
HIK VISION
HIK VISION MCH508 Manual de usuario
HIK VISION
HIK VISION TurboHD DS-2CC5209T-AITZE Manual de usuario
HIK VISION
HIK VISION DS-2DB4236I-CWX Manual de usuario
HIK VISION
HIK VISION DS-K1T606MF Manual de usuario
HIK VISION
HIK VISION DS-2CE78D0T-IT3FS Manual de usuario
HIK VISION
HIK VISION HiLook Series Manual de usuario
HIK VISION
HIK VISION PanoVu PT Series Manual de usuario
HIK VISION
HIK VISION iDS-TCS800-CI Manual de usuario
