HIK VISION Pyronix PCX 78 Manual de usuario

102017853 - V01 Software V12.0

PCX 78

User Guide

Date: 26 February 2018

Document ID: 102017853 -V01

Contains information owned by Pyronix and/or its affiliates. Do not copy, store, transmit or

disclose to any third party without prior written permission from Pyronix.

Other product and company names may be trademarks or registered trademarks of other

companies, and are the property of their owners. They are used only for explanation, without

intent to infringe.

Intended purpose

This document provides information about using and managing the product after installation and

commissioning.

Conventions

This document uses the following conventions:

►For more information... A cross-reference to a related or more detailed topic.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in moderate injury, damage

the product, or lead to loss of data.

Indicates an important situation which, if not avoided, may seriously impair operations.

Additional information relating to the current section.

Contact

Pyronix Ltd,

Secure House,

Braithwell Way,

Hellaby,

Rotherham,

S66 8QY,

www.pyronix.com

ii PCX User Guide 102017853 - V01

Contents

Contents iii

System Description 5

Introduction 5

HomeControl+ App 6

Operation 7

Getting Started 7

Operating the Panel 7

Arming the System 8

Disarming the System 9

Using the Keyfob 10

Locking the Keyfob 11

Quick Arming 11

Arming and Disarming with the Tag Reader 11

Access Control 12

Special Disarm Users 12

PyronixCloud 13

Setting up PyronixCloud on the Panel 13

Setting up the PyronixCloud 13

Setting Up The HomeControl+ App 14

HomeControl+ App Icons 17

Configuration 18

Chime Feature 18

PA from Keypad 18

Fire Alarm from Keypad 18

Master Manager Menu Options 19

Entering the Master Manager Menu 20

Bypass Inputs 20

Operate User Automation Outputs 21

Date & Time 22

Change Codes 23

User Codes 23

Proximity Tags 24

Keyfobs 25

Review Log 26

Setup App Data 27

Standard Security 27

High Security 28

SMS Phonebook 29

Walk Test 30

Bell Test 30

Allow Engineer Menu 31

Block Remote Arming 31

Block UDL 32

System Sounds Demo 32

Exit Master Manager Menu 33

Reference 34

Handover Form 34

SMS Commands 34

PCX User Guide 102017853 - V01 iii

Inputs 36

Outputs 37

Users 39

Compliance 40

Notes 42

iv PCX User Guide 102017853 - V01

System Description

Introduction

The PCX is a hybrid alarm system. It integrates the award winning Enforcer two-way wireless

technology with multiple automation outputs and a host of high security features. The system is easy

to use and can alert you to system activations via HomeControl+ smartphone App notification

messages. It can also send alarms to the Alarm Receiving Centre and maintenance company.

Always Alert

The two-way wireless movement detectors are fully operational when the system is armed, making

your system more secure. In other wireless systems, devices are disabled for up to five minutes after

every activation to save battery, therefore compromising your security.

Battery Monitoring/Saving

Advanced technology preserves the battery life of each wireless device. The PCX panel also informs

you in advance of when a battery needs replacing, giving you enough time to change the battery in

the specific device before it stops working. This key feature keeps your environment fully protected,

unlike other conventional systems.

High Security Encryption

128 bit high security wireless encryption protocol and intelligent wireless jamming detection.

User Friendly Keyfobs

The two-way wireless keyfob allows you to see the status of your PCX via three colour LEDs:

• System armed: A RED LED will illuminate.

• System disarmed: A GREEN LED will illuminate.

• System fault: An AMBER LED will illuminate (this will flash when the keyfob is unable to arm the

system).

• Alarm activated: A flashing RED LED.

It is possible to allocate different functions to each keyfob, such as: arming or disarming different

areas, activating outputs to control external devices (such as: gates), requesting the system status

and activating PA (panic alarms).

Up to 32 wireless keyfobs can be added to your PCX. Each wireless keyfob has a unique ID, which

can be reported to the ARC and HomeControl+ App. These are stored in the event log of the PCX

individually.

Keyfobs may only be used if the PCX-RIX32-WE is installed. Ask your engineer for more

information.

User Automation Outputs

The PCX gives you the option to operate devices (such as: gates, lights, sprinklers.) via your keypad

or remotely via your keyfob or HomeControl+ App.

PCX User Guide 102017853 - V01 5

HomeControl+ App and SMS notifications

Your PCX will provide you with real-time push notifications on your smart device or within the

HomeControl+ App, such as: that your child has returned home from school, or a leakage of water in

your property. You can also opt to receive these via SMS text messages, when a GPRSmodem is

connected to the panel.

HomeControl+ App

The PCX system can be remotely controlled using the HomeControl+ App. It allows you to arm and

disarm the PCX, check the system status and bypass inputs. It also allows you to activate devices

remotely, such as gates, lights, sprinklers and more. The HomeControl+ App and PyronixCloud

communication is fully encrypted to the highest standard and no sensitive user data is stored on the

PyronixCloud.

The HomeControl+ App is available in two versions: Android from Google Play Store and iOS from

Apple store.

6 PCX User Guide 102017853 - V01

Operation

Getting Started

Operating the Panel

There are four different methods that can be used in arming or disarming your alarm: using a keypad,

using a proximity tag, a keyfob or the HomeControl+ App on your smart device.

Table 1 - Button Operations

Button Description

aQuickly exit a menu.

Select Area A.

Change case when entering text.

bMove back to the previous main menu item.

Select Area B.

cMove back to the previous option in a sub-menu.

Select Area C.

Display additional information in the log.

Delete letters or numbers when entering text.

Enables chime feature.

dScroll forwards in the log.

Select Area D.

Access the user menu.

Press and hold to configure the keypad.

pTrigger PA (Panic Alarms) - only if enabled by an engineer.

fTrigger fire alarms - only if enabled by an engineer.

[] Move from one option to another while in a sub-menu.

Move through text.

Select Area 1, 2 or 3.

Also functions the same as the rest of the number / letter keys for entering numbers and text.

tSelect items and enter into a sub-menu or option.

0Enter a space when entering text.

Select Area 0.

xScroll forwards in the main menu and sub-menus.

When you have scrolled through all the options in a menu, returns to the previous menu level.

The Master Manager Menu allows you to setup specific features by asking you a series of setup

questions:

• Main menus are in capital letters and finish with a question mark, for example, LEARN USER

CODES KEYFOBS & TAGS?.

• Sub-menus are in lower case letters and finish with a question mark, for example, User

Codes/Tags/Learn Keyfobs?.

PCX User Guide 102017853 - V01 7

• Programmable options are in lower case letters and do not finish with a question mark, but

instead: Yes/No, or other options, such as User / Manager.

• To navigate through the menu system, answer the questions in the main and sub-menus.

For example, if the question is: LEARN USER CODES KEYFOBS & TAGS?, pressing twill take

you into the sub-menu User Codes/Tags/Learn Keyfobs?, and pressing tagain will then take

you into the programmable options of this sub-menu. If at this point you press x, you will be

taken out of the individual option. Continue to press xand you will navigate through the sub-

menus and eventually return to the main menu.

Arming the System

There are four ways that you can arm your system.

1. Enter your User Code on the keypad. The User Code needs to be programmed in the Master

Menu.

PCX Enter Your Code Arm Areas Please Wait. . .

Arming Wireless

Arming [029]

Area A

User

Code

User

Code

Stop Arming?

Press the 0, 1, 2, 3, A, B, C or D

keys to select the area to be armed

Time 10:09 c [******] [0123ABCD]

[******]

2. Present your tag and deselect any areas that are not to be armed, then press the tbutton.

Options 1 & 2 only function if ‘Arm Area Choice’ is selected as ‘Yes’ in the

Learn User

Codes/Tags/Keyfobs?

menu. If selected as ‘No’, then all areas allocated to your user will

arm.

3. Open the HomeControl+ App on your smart device and sign into your system with your User

Code and password details. Then touch the green (disarmed) padlock icons to turn them to red

padlock icons and arm those areas.

100%9:41 AM

8 PCX User Guide 102017853 - V01

For more information, contact your installer.

4. Press Îand then release, the keyfob will arm the areas it has been assigned to by your installer.

A red LED light will illuminate when the system is armed.

The keyfob buttons can be programmed in the Master Manager Menu

Learn User

Codes/Tags/Keyfobs

Disarming the System

There are four ways that you can disarm your system.

1. Enter your User Code on the keypad. The User Code needs to be programmed in the Master

Menu.

PCX PCXEnter Your Code Disarm Areas

User

Code t

Press the 0, 1, 2, 3, A, B, C or D keys

to select the area to be armed.

Time 10:09 c [******] [0123ABCD] Time 10:09 c

2. Present your tag and select any areas that are to be disarmed, then press the tbutton.

Options 1 & 2 only function if ‘Arm Area Choice’ is selected as ‘Yes’ in the

Learn User

Codes/Tags/Keyfobs?

menu. If selected as ‘No’, then all areas allocated to your user will

disarm.

PCX User Guide 102017853 - V01 9

3. Open the HomeControl+ App on your smart device and sign into your system with your User

Code and password details. Then touch the red (armed) padlock icons to turn them to green

padlock icons and disarm those areas.

100%9:41 AM

For more information, contact your installer.

4. Press Îand then release, the keyfob will disarm the areas it has been assigned to by your

installer. A green LED light will illuminate to indicate the system is disarmed.

The keyfob buttons can be programmed in the Master Manager Menu

Learn User

Codes/Tags/Keyfobs

Using the Keyfob

The wireless keyfob has four buttons that can be programmed to specific functions: no action, show

status, arm area, disarm area, latch output, timed output and PA alarm activation. This can be

customised to operate as desired (programmed in the function Change Code).

Button Default configuration

Programmed for ‘Arm Area’: one or more areas will be armed when pressed.

Programmed for ‘Disarm Area’: one or more areas will be disarmed when pressed.

10 PCX User Guide 102017853 - V01

Tabla de contenidos

Otros manuales de Panel de control de HIK VISION

HIK VISION

HIK VISION AX Series Manual de usuario

HIK VISION

HIK VISION AX DS-PWA32-HSR Manual de usuario

HIK VISION

HIK VISION KH6 Series Manual de usuario

HIK VISION

HIK VISION DS-PHA20-P Manual de usuario

HIK VISION

HIK VISION AX DS-PWA32-HSR Manual de usuario

HIK VISION

HIK VISION AX HYBRID PRO Manual de usuario

HIK VISION

HIK VISION DS-19A Series Manual de usuario

HIK VISION

HIK VISION DS-19S08N-04F/K Series Manual de usuario

HIK VISION

HIK VISION DS-PK-LRT(433MHz) Manual de usuario

HIK VISION

HIK VISION DS-PWA32-HR Manual de usuario

HIK VISION

HIK VISION AX Series Manual de usuario

HIK VISION

HIK VISION AX PRO M2H Manual de usuario

HIK VISION

HIK VISION DS-19A Series Manual de usuario

HIK VISION

HIK VISION DS-PHA64-LP/NP Manual de usuario

HIK VISION

HIK VISION DS-PK00 series Manual de usuario

HIK VISION

HIK VISION DS-PK-LRT Manual de instrucciones

HIK VISION

HIK VISION AX Series Manual de usuario

HIK VISION

HIK VISION DS-KH8340-TCE2 Manual de usuario

HIK VISION

HIK VISION AX Series Manual de usuario

HIK VISION

HIK VISION Pyronix EURO 280 Manual del propietario

HIK VISION

HIK VISION 1006KI Instrucciones de funcionamiento

HIK VISION

HIK VISION AX PRO Manual de usuario

HIK VISION

HIK VISION AX DS-PWA32-H Manual de usuario

HIK VISION

HIK VISION DS-PWA96-M2-WB Manual de usuario

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas