5
Pulse Width Modulation
is a method of transmitting information on a series of pulses, changing the
frequency, rather than a continuously varying analog signal. It will allow you to control the amperage going
into the generator in a very easy way. This ability keeps the cell run
prolongs the life of the cell while increasing the HHO output
Efficiency:
HHO generators will run cooler than standard linear power amps, requiring substantially less heat
sink mass;
Amperage control: the control of
the amperage going into the generator will be very easy to control. The
ability to control the amperage keeps the cell running at cool operating temperatures and prolongs the life of
the cell while increasing the HHO output.
6
NEW TECHNOLOGY: The
the same amperage and HHO production regardless the electrolyte concentration, water temperature or
water levels. The CCPWM is the best solution for the professional market
of error. We can put more or less electrolyte and the amperage and HHO production will always be the same.
The CCPWM60A is also
designed for making the automatic power supply of the HHO System without the need
for relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier
to install. In general the new CC
- Engine is stopped –
- Engine isworking –
The CCPWM60A auto-
detect when the car engine is running and automatically switches ON the HHO
without any additional requirements. The device will automatically power OFF when the car engine is turned
OFF or not running.
The CC
PWM is also capable to control a water level sensor inserted in the water tank turning the system OFF
when the
level drops from a certain point.
7
1. Make sure your engine is not
2. Mounttheproductasnearoft
do notmountitoverthe ba
3. In the back of the
CCPWM60A there is a sticker to help you with the connections
CCPWM60A –
is a method of transmitting information on a series of pulses, changing the
frequency, rather than a continuously varying analog signal. It will allow you to control the amperage going
into the generator in a very easy way. This ability keeps the cell run
ning at cool operating temperatures and
prolongs the life of the cell while increasing the HHO output
HHO generators will run cooler than standard linear power amps, requiring substantially less heat
the amperage going into the generator will be very easy to control. The
ability to control the amperage keeps the cell running at cool operating temperatures and prolongs the life of
the cell while increasing the HHO output.
(Constant Current Pulse Width Modulator)
the same amperage and HHO production regardless the electrolyte concentration, water temperature or
water levels. The CCPWM is the best solution for the professional market
because there will be no possibility
of error. We can put more or less electrolyte and the amperage and HHO production will always be the same.
designed for making the automatic power supply of the HHO System without the need
for relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier
0A will work based on the
below 12,8V – PWM is not working;
above 13V – PWM is working.
detect when the car engine is running and automatically switches ON the HHO
without any additional requirements. The device will automatically power OFF when the car engine is turned
PWM is also capable to control a water level sensor inserted in the water tank turning the system OFF
level drops from a certain point.
unning duringinstallation;
batteryaspossible(maximum3meters),pro
;
CCPWM60A there is a sticker to help you with the connections
5
is a method of transmitting information on a series of pulses, changing the
frequency, rather than a continuously varying analog signal. It will allow you to control the amperage going
ning at cool operating temperatures and
HHO generators will run cooler than standard linear power amps, requiring substantially less heat
the amperage going into the generator will be very easy to control. The
ability to control the amperage keeps the cell running at cool operating temperatures and prolongs the life of
will allow you to have always
the same amperage and HHO production regardless the electrolyte concentration, water temperature or
because there will be no possibility
of error. We can put more or less electrolyte and the amperage and HHO production will always be the same.
designed for making the automatic power supply of the HHO System without the need
for relays or picking up the signal from the alternator/ignition key, making the system safer to use and easier
detect when the car engine is running and automatically switches ON the HHO
System,
without any additional requirements. The device will automatically power OFF when the car engine is turned
PWM is also capable to control a water level sensor inserted in the water tank turning the system OFF
ingthatitiswell fixed.Please
CCPWM60A there is a sticker to help you with the connections
:
