HG2LIGHTING.COM/SUPPORT
© 2019 Copyright HG2 Emergency Lighting. All Rights Reserved. • PATENT PENDING • Patents #
INSTALL GUIDE
V071619
2
WARRANTY
This warranty gives you certain rights and you may also have other rights that may
vary from state to state. This warranty is given only to the end-use purchaser of the
accompanying product (referred to in this warranty as “this Product”).
Product Registration
HG2 Emergency Lighting warrants Products within the “Warranty Period” and that
have been properly registered. To register this Product, go to www.hg2lighting.com.
Each HG2 product must be registered within 90 days of purchase.
What Is Covered
HG2 Emergency Lighting warrants to you for the Warranty Period that there are no
defects in the materials and workmanship of this Product. The “Warranty Period” is
a maximum of 5 years (Limited) from the date of purchase with proof of purchase.
What Is NOT Covered
This warranty is VOID—that is, this Product has no warranty—if (1) you did not
purchase this Product from an authorized HG2 reseller within the United States, (2)
this Product has been serviced, modied or tampered with by anyone other than
an Authorized Service Representative of HG2 Emergency Lighting (3) the serial
number has been modied, defaced or removed from this Product, (4) this Product
has been abused or purposely damaged, (5) non-HG2 controllers have been
used, (6) this Product has been transported without the proper preparation and
packaging, (7) a non-certied HG2 Installer performed work on the unit or installed
the unit.
If Your Product Is Defective
Call 866-468-4569, or if you suspect a defect in materials or workmanship in this
Product, you can report it to a HG2 Emergency Lighting Authorized Service Center.
During the Warranty Period, supply HG2’s representative with a copy of your dated
bill of sale showing that this Product was purchased within the United States.
For the name of HG2 Authorized Dealer or Distributor call 866-468-4569. After
contacting the HG2 Authorized Dealer or Distributor, you may be required to deliver
or send the Product properly packaged, freight prepaid,to the Authorized Service
Center together with a photocopy of your bill of sale.
What HG2 Will Do
HG2 will evaluate your report of a possible defect to determine whether a defect
exists, and if it does exist, HG2 (or its Authorized Service Center) will repair this
product or (at HG2’s option) replace this Product with a product that performs the
same functions and performs as well as the original Product. HG2 reserves the
right to supply refurbished or remanufactured replacement products provided that
the replacement products meet the manufacturer’s specications for new products.
The repaired or replacement product will be returned to you at no cost.
Exchange Service
HG2 Emergency Lighting Systems are covered by an 5 Year Limited Warranty. You
must contact HG2 Support to rst troubleshoot the issue, and if this Product is
deemed inoperable, then a RMA (Return Merchandise Authorization) will be opened
and sent to you. All RMA shipments must have the RMA number listed on the box
or on a form in the box. Return shipments without RMA information attached will
not be guaranteed.
HG2 Support
Toll-free customer service and technical support is available for assistance at 866-
468-4569. You may access more HG2 support by going to the HG2 website at:
hg2lighting.com.
Please keep a record of this Product by completing the online registry. In response
we will send a conrmation of the approved registered products. Retain this
information with your proof of purchase (bill of sale) in case your Product is lost,
stolen, or requires service.
You may ship this product back to:
Attn: Returns
HG2 Emergency Lighting
477 N. Semoran Blvd, Orlando FL, 32807
Important:
We recommend that you keep all original packing materials, in the event that you
ship this product.
HG2 Emergency lighthing reserves the right to discontinue, modify, or upgrade any
products it manufactures with design improvements without prior notice.
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, WRITTEN
OR ORAL, WHETHER EXPRESSED BY AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL, OR SAMPLE. ANY AND ALL WARRANTIES OTHER
THAN THIS ONE, WHETHER EXPRESSED OR IMPLIED, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED.
SAFETY REGULATIONS & WARNINGS
When mounting this product, care must be taken to avoid damage/
interference to vehicle components and systems—such as brake and fuel
lines, electrical devices (computers and airbag sensors) and wiring.
To ensure proper mounting and avoid damage or interference:
• Inspect both sides of mounting surface before drilling or inserting
fasteners.
• Use fasteners of proper length.
• Install control components in accessible location that provides for safe
operation of the vehicle and product controls under any driving condition.
• Do not install this product in a manner that interferes with moving parts, or
where lifts or jacks are used to raise the vehicle.
• Do not install this product in a manner that interferes with the deployment
of an airbag.
When wiring this product:
• Deburr and install grommets into any holes drilled for wiring.
• Route wires to avoid sources of excessive heat and any moving parts,
such as exhaust, suspension systems, or brake pedal.
• Secure all wires using wire/cable ties or equivalent.
• Use NEGATIVE (-) battery post for all chassis ground connections for
optimum per formance and eciency.
• Do not route wires in a manner that interferes with the deployment of an
airbag.
The installer or technician assumes any and all responsibility to determine
proper mounting location and wire routing, with consideration of the safety of
the vehicle operator and passengers.
• Do not stare directly into the lights. High-intensity LEDs can cause
momentary blindness and/or damage to your eyes.
• Do not mount product/product controls that interfere with/impede safe
operation of vehicle.
• Do not attempt to initiate or control this lighting system during hazardous
driving conditions
• Do not clean product with a pressure washer, solvents or other chemicals
This guide provides information for a safe and proper installation of your HG2
Emergency Lighting product. Please read this guide in its entirety before
attempting to install or operate this product. This guide oers information that
could prevent damage or serious injury.
The installation of this kit may require that the vehicle is safely supported o of
the ground, using jack stands or a vehicle lift. Never work on a vehicle supported
only by a jack. Observe all warnings and procedures as outlined in the manual
or instructions provided by the manufacturer of your jack stands, vehicle lift and
other necessary tools required to install this kit.
Installer or technician should have a good understanding of automotive
electronics, and a general working knowledge of related automotive systems
and procedures.
SAFETY FIRST!
WARNING!
FAILURE TO FOLLOW THESE GUIDELINES COULD
CAUSE DAMAGE TO THE PRODUCT, VEHICLE, AND/OR
SERIOUS PERSONAL INJURY OR DEATH.
NEVER WORK UNDER THE HOOD WITHOUT THE
PROPER EQUIPMENT IN PLACE TO HOLD THE VEHICLE
SAFELY AND SECURELY WHILE OPERATING/FIXING IT.
