Heatmiser Neo Stat-e Manual de usuario

Model:

Series

Table of Contents

3-4

5-6

8-9

Product Image

Table of Contents

What is a Programmable

Room Thermostat?

Installation Procedure

Mode Select

Pairing the neoHub

Pairing the neoStat-e

What is a Mesh Network?

29-30

LCD Display

Setting the Switching Times

Factory Reset

Timer Override

Optional Features

Optional Features Table

Time Clock Mode Wiring Diagram

Mode 2 - Time Clock

LCD Display

Temperature Display

Setting the Clock

Setting the Comfort Levels

Setting the Temperature

Temperature Hold

Locking/Unlocking the neoStat-e

Mode 1 - Thermostat 10

11-12

15-16

Frost Protection

Power ON/OFF

Holiday Programming

Optional Features

Re-calibrating the Thermostat

Error Codes

Thermostat Mode Wiring Diagram

23-26

Available in : Sapphire Black and Glacier White

Series

The way to set and use your programmable room thermostat is to nd the lowest

temperature settings that you are comfortable with at the dierent times you have

chosen, and then leave it alone to do its job.

The best way to do this is to set the room thermostat to a low temperature

– say 18°C , and then turn it up by 1°C each day until you are comfortable with the

temperature. You won’t have to adjust the thermostat further. Any adjustment above

this setting will waste energy and cost you more money.

You are able to temporarily adjust the heating program by overriding or using the

temperature hold feature. These features are explained further on pages 17 and 18

of this manual.

Programmable room thermostats need a free ow of air to sense the temperature,

so they must not be covered by curtains or blocked by furniture. Nearby electric

res, televisions, wall or table lamps may also prevent the thermostat from working

properly.

What is a Programmable Room Thermostat?

A programmable room thermostat is both a programmer and a room thermostat.

A programmer allows you to set “On”and “O”periods to suit your own lifestyle.

A room thermostat works by sensing the air temperature, switching on the heating

when the air temperature falls below the thermostat setting, and switching it o once

this set temperature has been reached.

So a programmable room thermostat lets you choose what times you want the heating

to be on, and what temperature it should reach while it is on. It will allow you to select

dierent temperatures in your home at dierent times of the day (and days of the week)

to meet your particular needs and preferences.

Setting a programmable room thermostat to a higher temperature will not make the

room heat up any faster. How quickly the room heats up depends on the design and

size of the heating system.

Similarly reducing the temperature setting does not aect how quickly the room cools

down. Setting a programmable room thermostat to a lower temperature will result in

the room being controlled at a lower temperature, and saves energy.

Series

Installation Procedure

This neoStat-e is designed to be ush mounted and requires a back box of

35mm (minimum depth) to be sunk into the wall prior to installation.

Step 1

Remove the screw from the bottom face of the thermostat then carefully separate

the front half from the back plate.

Step 2

Place the thermostat front somewhere safe.

Terminate the thermostat as shown in the diagrams on pages 28 of this booklet.

Note: For time clock wiring connections, terminate as shown on page 35.

Step 3

Screw the thermostat back plate securely into the back box.

Step 4

Clip the front of the thermostat onto the back plate, securing it in place with the

retaining screw.

Mount the thermostat at eye level.

Read the instructions fully so you get the best from our product.

Don’t

Do not install near to a direct heat source as this will aect functionality.

Do not push hard on the LCD screen as this may cause irreparable damage.

3 4

Series

Mode Select

This neoStat-e can either be used as a thermostat or a time clock.

Thermostat mode is the default setting.

To change between thermostat or time clock modes, follow these steps.

• Use the Left / Right keys to scroll to SETUP .....................................................

• Press and hold the Tick key for 10 seconds ......................................................

• Use the Left / Right keys to scroll between modes ........................................

Mode 1 = Thermostat

Mode 2 = Time Clock

Note: the selected option will ash.

• Press the Tick key to conrm selection .............................................................

The neoStat-e will revert to the main display screen for the selected mode.

For time clock mode instructions, rst pair the time clock with the neoHub as

explained on page 8, then turn to page 29.

The next step is to join the neoStat-e to the neoHub, we recommend joining the

neoStat-e located nearest to the neoHub rst.

To add a neoStat-e, follow these steps;

• Select Add Zone, enter a zone title and press Add Zone again.

• You now have two minutes to join the neoStat-e to the neoHub.

• On the neoStat-e, use the Left / Right keys to select SETUP and press Tick.

Pairing the neoHub

Pairing the neoStat

To pair the neoHub with the neoApp, follow these steps.

• Connect the power supply to the neoHub.

• Connect the neoHub to your router with the Ethernet cable provided. The router

will automatically assign an IP address to the neoHub, the Link LED will light up

once the neoHub has connected to your network.

• Download the FREE Heatmiser neoApp from the Apple App Store, Google Play

Store or Amazon App Store and register an account.

• Once you have registered your account, press the Login button then press the

Add Location option.

• Press the connect button on the neoHub to add the location to your account.

• When successfully connected, enter a title for the new location (e.g. Home) and

congure the time zone for the system.

109

Series

Mode 1 - Thermostat

What is a Mesh Network

NeoStats work using a mesh network, meaning neoStats have the ability to send and

receive signals via other thermostats/time clocks on the network.

This signal is relayed from one device to another until it reaches its destination.

This communication method extends the communication range whilst oering

increased network stability when compared with standard RF thermostats.

The Mesh symbol is shown when the device is communicating with the neoHub,

if the mesh symbol disappears this indicates connection to the neoHub has been lost.

• Feature 01 is displayed on screen.

• Press the Tick key to pair the neoStat-e to the neoHub ....................................

• The MESH symbol appears ashing on the display.

• When the neoStat-e successfully connects to the neoHub the MESH symbol will

be permanently displayed.

• Press Next to add more zone or press Finish to complete the setup.

Please note, you only have to pair the hub to your account once. To pair any additional

neoStats, select Add Zones from the Manage Zones option in the neoApp.

1211

Series

1. Day Indicator - Displays the day of the week.

2. Mesh Symbol – Displayed when connected to the neoHub.

3. Floor Limit Symbol – Displayed when the oor probe has reached the

temperature limit set on feature 07.

4. Frost Symbol – Displayed when frost protection mode is active.

5. Flame Symbol – Displayed when the thermostat is calling for heat, ashes when

optimum start is active.

6. Floor/Room Temp – Indicates the current sensor mode.

7. Set – Displayed when changes are being made to the program schedule or

current set point.

8. Key Lock Indicator – Displayed when the KeyLock is Locked.

9. Program Indicator – Displayed during programming to show which period is

being altered.

10. Main Menu – Displays which option is currently selected.

11. Temperature Format – Degrees Celsius or Fahrenheit.

12. Temperature – Displays the current sensor temperature.

13. Clock - Time displayed in 24 hour format.

14. Holiday Left – Displayed when the thermostat is in holiday mode.

15. Hold Left – Displayed when a temperature hold is active, the remaining time

will be shown.

LCD Display

1 4

1413

Series

This neoStat-e can be congured for dierent sensor options such as built in air sensor,

oor sensor or both. The display will clearly indicate which sensor is being used by

showing either “Room Temp” or “Floor Temp” before the actual temperature value.

When the neoStat-e is set to use both the air & the oor sensor, the room temperature

will be displayed by default.

To view the current oor temperature, press and hold the Left and Right arrow keys

for 5 seconds, the oor temperature will then be displayed. .......................................

Setting the Clock

To set the clock, follow these steps.

• Use the Left / Right keys to scroll to CLOCK ........................................................

• Press Tick to conrm selection ...........................................................................................

• Use the Up / Down keys to set the hours (24 hour format) ............................

• Press Tick to conrm selection ...........................................................................................

• Use Up / Down keys to set the minutes ................................................................

• Press Tick to conrm selection ...........................................................................................

• Use Left / Right keys to set the the day .................................................................

• Press Tick to conrm selection and return to the main display ...........................

Temperature Display

Day

Minutes

Room Temperature Floor Temperature

Hours

1615

Series

• Use the Up / Down keys to set the hours ..............................................................

• Press Tick to conrm ..............................................................................................................

• Use the Up / Down keys to set the minutes .........................................................

• Press Tick to conrm ..............................................................................................................

• Use the Up / Down keys to set the temperature .................................................

• Press Tick to conrm the settings .....................................................................................

• Press the Right arrow key .....................................................................................................

• LEAVE will now ash and the current settings will be displayed.

• Press Tick to alter LEAVE settings ......................................................................................

• Repeat these steps to set all comfort levels.

• For any unused periods set time to --:--

• Use the Left / Right keys to scroll to DONE and press Tick .......................

Comfort Levels Explained

The neoStat-e oers three program mode options; Weekday/Weekend programming,

7 Day programming and 24 Hour programming. There is also the option to

use the thermostat as a Non-Programmable thermostat.

When thermostats are connected to the mesh network, the program mode for the system

is congured by using the neoApp.

The thermostat is supplied with comfort levels already programmed, but these can be

changed easily. The default times and temperature settings are;

07:00 - 21°C (Wake) 09:00 - 16°C (Leave) 16:00 - 21°C (Return) 22:00 - 16°C (Sleep)

If you only want to use 2 levels, you should program the unused levels to --:--

For Weekday/Weekend programming, the four comfort levels are the same for Mon-Fri, but can

be dierent for Sat-Sun. For 7 Day programming each day of the week can have four dierent

comfort levels. In 24 Hour mode all days are programmed with the same comfort levels.

• To program the comfort levels, use the Left / Right keys to scroll to EDIT .............

• Press Tick to conrm selection .......................................................................................................

• Use the Left / Right keys to select day / period of week (the selection will ash).

• Press Tick to conrm selection ........................................................................................................

• WAKE will now ash and the current time and temperature setting will be shown.

• Press Tick to alter WAKE settings ..................................................................................................

1817

Series

Temperature Control

The Up / Down keys allow you to adjust the set temperature .............................

When you press either key, you will see the word SET and the desired

temperature value. Use the Up / Down keys to adjust the SET value ...............

Press Tick to conrm settings and return to the main display ....................................

Temperature Hold

The temperature hold function allows you to manually override the current operating

program and set a dierent temperature for a desired period.

• Use the Left / Right keys to scroll to HOLD ...........................................................

• Press Tick to conrm selection ..........................................................................................

• Use the Up / Down keys to set the desired Hold period .................................

• Press Tick to conrm selection ..........................................................................................

• Use the Up / Down keys to set the desired Hold temperature ......................

• Press Tick to conrm selection ..........................................................................................

You will see the HOLD LEFT indication is displayed on screen.

The time will countdown the set duration and then revert to the normal program.

To cancel a temperature Hold, repeat these steps but reduce the Hold time to 00:00 hrs

HOLD LEFT Indicator

Hold Time Remaining

Set Temperature

Set Icon

Note: This new temperature is maintained only until the next programmed comfort level.

At this time, the thermostat will revert back to the programmed levels.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termostato de Heatmiser

Heatmiser

Heatmiser PRT-E1 Manual de usuario

Heatmiser

Heatmiser Slimline-RF Manual de usuario

Heatmiser

Heatmiser PRT-B Manual de usuario

Heatmiser

Heatmiser PRT-W1 Manual de usuario

Heatmiser

Heatmiser Touch Manual de usuario

Heatmiser

Heatmiser NetMonitor V3 Manual de operación

Heatmiser

Heatmiser PRT-ETS Manual de usuario

Heatmiser

Heatmiser PRT-EWTS Manual de usuario

Heatmiser

Heatmiser DT-W Manual de usuario

Heatmiser

Heatmiser PRT-E Manual de usuario

Heatmiser

Heatmiser PRT-TS WiFi Manual de usuario

Heatmiser

Heatmiser TouchScreen Series Manual de usuario

Heatmiser

Heatmiser DS1-E Manual de usuario

Heatmiser

Heatmiser neoStat-hw V2 Manual de usuario

Heatmiser

Heatmiser PRT-ETS WiFi Manual de usuario

Heatmiser

Heatmiser neoX Manual de usuario

Heatmiser

Heatmiser SLIMLINE Manual de usuario

Heatmiser

Heatmiser Touch Series Manual de usuario

Heatmiser

Heatmiser DT-W Manual de usuario

Heatmiser

Heatmiser JG PRT-E Manual de usuario

Heatmiser

Heatmiser smartstat Manual de usuario

Heatmiser

Heatmiser UH1-W Guía de inicio rápido

Heatmiser

Heatmiser TM4-TS Manual de usuario

Heatmiser

Heatmiser Touchpad (TFT) Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Honeywell

Honeywell T6811 Manual de usuario

Heatmiser neo Stat-e Manual de usuario

Manuales populares de Termostato de otras marcas