Heatmiser DS1-E Manual de usuario

Wiring Diagram

RCD

MAINS SUPPLY

L N

MATTING OR WIRE

FLOOR PROBE

DS1-E

230VAC

Floor

Sensor

RT+ RT- N N L LOAD

The Heatmiser DS1-E dial type thermostat is designed

specically for electric underoor heating.

This thermostat incorporates the following functions;

• Adjustable Switching Dierential

• LED Heat and Power Indication

• 230v AC, 13A Switching

Want More Information?

Call our support team on:

+44 (0)1254 669090

Or view video specications

directly on our website:

www.heatmiser.com

Introduction 1

Model: DS1-E

IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE

HEATING SYSTEM.

This dial thermostat is designed to be surface mounted.

1. Separate the front part of the thermostat by unscrewing securing screws on the

bottom face of the thermostat.

2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at

the marked positions and insert a wall plug in to each hole.

3. Terminate the thermostat as per wiring diagram and screw the DS1-E back plate to the

back box.

4. Reconnect the thermostat front plate and insert the securing screws.

Installation

PDF FAQ

Rev 2.0

Wiring Diagram

RCD

MAINS SUPPLY

L N

MATTING OR WIRE

FLOOR PROBE

DS1-E

230VAC

Floor

Sensor

RT+ RT- N N L LOAD

The Heatmiser DS1-E dial type thermostat is designed

specically for electric underoor heating.

This thermostat incorporates the following functions;

• Adjustable Switching Dierential

• LED Heat and Power Indication

• 230v AC, 13A Switching

Want More Information?

Call our support team on:

+44 (0)1254 669090

Or view video specications

directly on our website:

www.heatmiser.com

Introduction 1

Model: DS1-E

IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE

HEATING SYSTEM.

This dial thermostat is designed to be surface mounted.

1. Separate the front part of the thermostat by unscrewing securing screws on the

bottom face of the thermostat.

2. Mark 2 hole positions on the wall using the backplate as a positioning template. Drill at

the marked positions and insert a wall plug in to each hole.

3. Terminate the thermostat as per wiring diagram and screw the DS1-E back plate to the

back box.

4. Reconnect the thermostat front plate and insert the securing screws.

Installation

PDF FAQ

To change the set point, rotate the dial until it points at the desired temperature.

Setting The Temperature

The Heatmiser DS1-E oers 1, 2 and 3°C switching dierential.

With a 1°C switching dierential the heating will switch on 1°C below the set

temperature and will turn o when the set temperature is reached.

A 2°C will turn the heating on 2°C below the set temperature.

3°C will switch the heating on 3°C below the set temperature.

To set the dierential, set the DIP switches according to the table below.

This setting is only required when the sensor option is set to Air and Floor mode.

The setting is used to protect the oor surface from overheating.

The oor temperature limit can be set to 20, 28 or 40°C.

To set the required oor limit temperature, set the DIP switches according to the table.

Should the oor temperature be achieved (even if the room temperature has not achieved

the set temp) the heating will turn o. The Heat Active LED will ash in this case.

The thermostat has three modes of operation. Select the desired mode,

and set the DIP switches according to the table.

The DIP switches can be accessed from the back of thermostat.

Air Sensor: Uses the built in air sensor only.

Air Sensor & Floor Limiting Sensor: Uses the built in air sensor but also uses the

remote oor sensor to ensure the oor temperature doesn’t overheat.

Floor Sensor: Uses the remote oor sensor only.

Switching DierentialFloor Temperature Limit

Sensor Option

1 °C Switching

2 °C Switching

3 °C Switching

20°C

28°C

40°C

Air Sensor

Air & Floor

Floor Sensor

Switch 1 & 2 OFF

Switch 1 ON and Switch 2 OFF

Switch 1 OFF and Switch 2 ON

Switch 5 & 6 OFF

Switch 5 ON and Switch 6 OFF

Switch 5 OFF and Switch 6 ON

Switch 3 & 4 OFF

Switch 3 ON and Switch 4 OFF

Switch 3 OFF and Switch 4 ON

Otros manuales de Termostato de Heatmiser

Heatmiser

Heatmiser DS-SB Manual de usuario

Heatmiser

Heatmiser PRT-EW Manual de usuario

Heatmiser

Heatmiser PRT-EN1 Slimline Series Manual de usuario

Heatmiser

Heatmiser DS1-EL Manual de usuario

Heatmiser

Heatmiser PRT-EW Manual de usuario

Heatmiser

Heatmiser Slimline-E Manual de usuario

Heatmiser

Heatmiser DT Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Heatmiser

Heatmiser DT Manual de usuario

Heatmiser

Heatmiser Touchpad (TFT) Manual de usuario

Heatmiser

Heatmiser PRT-EAU1 Manual de usuario

Heatmiser

Heatmiser neo Stat-e Manual de usuario

Heatmiser

Heatmiser DT-WTS1 Manual de usuario

Heatmiser

Heatmiser PRT-R2 Manual de usuario

Heatmiser

Heatmiser PRT-W Manual de usuario

Heatmiser

Heatmiser Senior Manual de usuario

Heatmiser

Heatmiser touch-n Manual de usuario

Heatmiser

Heatmiser neo Stat WIFI Manual de usuario

Heatmiser

Heatmiser PRTHW-TS Manual de usuario

Heatmiser

Heatmiser Touch Series Manual de usuario

Heatmiser

Heatmiser PRT-ETS Manual de usuario

Heatmiser

Heatmiser UH6 Manual de usuario

Heatmiser

Heatmiser PRT-WTS Manual de usuario

Heatmiser

Heatmiser UH1-W Guía de inicio rápido

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Honeywell

Honeywell T6811 Manual de usuario