Hearth and Home Technologies 6000BE Manual de usuario

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

Underwriters

Laboratories Listed

Models:

6000BE

6000BE-IPI

IntheCommonwealthofMassachusetts:

• installation must be performed by a licensed

plumberorgasfitter;

• a CO detector shall be installed in the room

where the appliance is installed.

- Do not store or use gasoline or other

flammablevapors andliquids inthe vi-

cinity of this or any other appliance.

- What to do if you smell gas

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your build-

ing.

• Immediatelycallyour gassupplierfrom

a neighbor's phone. Follow the gas

supplier's instructions.

• If you cannot reach your gas supplier,

call the fire department.

- Installation and service must be

performedby aqualified installer, service

agency, or the gas supplier.

WARNING: IMPROPER INSTALLA-

TION, ADJUSTMENT, ALTERATION,

SERVICE OR MAINTENANCE CAN

CAUSE INJURY OR PROPERTY DAM-

AGE. REFER TO THIS MANUAL. FOR

ASSISTANCE ORADDITIONAL INFOR-

MATION CONSULT A QUALIFIED IN-

STALLER, SERVICEAGENCY, OR THE

GAS SUPPLIER.

READ THIS MANUAL BEFORE INSTALLING OR

OPERATING THISAPPLIANCE. THIS INSTALLERS

GUIDE MUST BE LEFT WITH APPLIANCE FOR

FUTUREREFERENCE.

1.This appliance may be installed in an af-

termarket,permanentlylocated,manufac-

tured(mobile)home,wherenotprohibited

bylocalcodes.

2. Thisapplianceisonlyforusewith thetype

of gas indicated on the rating plate. This

appliance is not convertible for use with

othergases,unlessacertifiedkitisused.

Please contact your Heat & Glo dealer with any

questionsorconcerns.For the numberofyournearest

Heat &Glo dealer, please call 1-888-427-3973.

Heat&Glo,a brand ofHearth&HomeTechnologiesInc.

20802KensingtonBoulevard,Lakeville,MN55044

WARNING: IF THE INFORMATION

IN THESE INSTRUCTIONS IS NOT

FOLLOWED EXACTLY, A FIRE OR

EXPLOSION MAY RESULT CAUS-

ING PROPERTY DAMAGE, PER-

SONAL INJURY, OR DEATH.

Thisproductmaybecoveredbyoneormoreofthefollowingpatents:(UnitedStates) 4593510, 4686807, 4766876, 4793322, 4811534,5000162,5016609,5076254,5113843, 5191877, 5218953, 5263471,

5328356,5341794,5347983,5429495,5452708,5542407,5601073,5613487,5647340,5688568,5762062,5775408,5890485,5931661,5941237,5947112,5996575,6006743,6019099,6048195,6053165,

6145502,6170481, 6237588, 6296474,6374822,6413079,6439226,6484712,6543698,6550687, 6601579,6672860,6688302B2,6715724B2,6729551,6736133,6748940,6748942,6769426,6774802,

6796302,6840261,6848441,6863064,6866205, 6869278, 6875012, 6880275, 6908039,6919884,D320652,D445174, D462436; (Canada) 1297749,2195264,2225408, 2313972; (Australia) 780250,

780403,1418504 or otherU.S. and foreignpatents pending.

Owner’s Manual

Installation and Operation

2Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

These units MUST use one of the vent systems

described in the Installing the Fireplace section of

the Installers Guide. NO OTHER vent systems or

components MAY BE USED.

This gas fireplace and vent assembly MUST be

vented directly to the outside and MUST NEVER be

attached to a chimney serving a separate solid fuel

burning appliance. Each gas appliance MUST USE

a separate vent system. Common vent systems are

PROHIBITED.

INSPECT the external vent cap on a regular basis to

make sure that no debris is interfering with the air

flow.

The glass door assembly MUST be in place and

sealed, and the trim door assembly MUST be in

place on the fireplace before the unit can be placed

into safe operation.

DO NOT OPERATE this appliance with the glass

door removed, cracked, or broken. Replacement of

the glass door should be performed by a licensed

or qualified service person. DO NOT strike or slam

the glass door.

The glass door assembly SHALL ONLY be

replaced as a complete unit, as supplied by the gas

fireplace manufacturer. NO SUBSTITUTE material

may be used.

DO NOT USE abrasive cleaners on the glass door

assembly. DO NOT ATTEMPT to clean the glass

door when it is hot.

Turn off the gas before servicing this appliance. It is

recommended that a qualified service technician

perform an appliance check-up at the beginning of

each heating season.

Any safety screen or guard removed for servicing

must be replaced before operating this appliance.

DO NOT place furniture or any other combustible

household objects within 36 inches of the fireplace

front.

READ and UNDERSTAND all instructions carefully

before starting the installation. FAILURE TO

FOLLOW these installation instructions may result

in a possible fire hazard and will void the warranty.

Prior to the first firing of the fireplace, READ the

Using Your Fireplace section of the Owners Guide.

DO NOT USE this appliance if any part has been

under water. Immediately CALL a qualified service

technician to inspect the unit and to replace any part

of the control system and any gas control which has

been under water.

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Installation and repair should be PERFORMED by a

qualified service person. The appliance and venting

system should be INSPECTED before initial use

and at least annually by a professional service

person. More frequent cleaning may be required

due to excessive lint from carpeting, bedding

material, etc. It is IMPERATIVE that the unit’s

control compartment, burners, and circulating air

passageways BE KEPT CLEAN to provide for

adequate combustion and ventilation air.

Always KEEP the appliance clear and free from

combustible materials, gasoline, and other

flammable vapors and liquids.

NEVER OBSTRUCT the flow of combustion and

ventilation air. Keep the front of the appliance

CLEAR of all obstacles and materials for servicing

and proper operations.

Due to the high temperature, the appliance should

be LOCATED out of traffic areas and away from

furniture and draperies. Clothing or flammable

material SHOULD NOT BE PLACED on or near the

appliance.

Children and adults should be ALERTED to the

hazards of high surface temperature and should

STAY AWAY to avoid burns or clothing ignition.

Young children should be CAREFULLYSUPERVISED

when they are in the same room as the appliance.

SAFETY AND WARNING INFORMATION

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

TABLE OF CONTENTS

Safety and Warning Information ................................................ 2

Service Parts Lists ..................................................................... 4

Section 1: Approvals and Codes ............................................... 8

ApplianceCertification................................................................... 8

InstallationCodes.......................................................................... 8

HighAltitude Installations............................................................... 8

Section 2: Getting Started ......................................................... 9

Introducing the Hearth & Home Technologies Gas Fireplaces ..... 9

Pre-installationPreparation ........................................................... 9

Section 3: Installing the Fireplace...........................................11

Constructing the Fireplace Chase ...............................................11

Step 1 Locating the Fireplace ..................................................11

Step 2 Framing the Fireplace.................................................. 12

Step 3 Installing the Vent System............................................ 14

A. Vent SystemApprovals........................................... 14

B. Installing Vent Components.................................... 21

C. Vent Termination .................................................... 24

Step 4 Positioning, Leveling,and

Securing the Fireplace................................................. 26

Step 5 Installing theOptional Heat-ZoneKit............................ 27

Step 6 The Gas Control Systems........................................... 27

Step 7 The Gas Supply Line ................................................... 28

Step 8 Gas Pressure Requirements ...................................... 28

Step 9 Wiring the Fireplace .................................................... 29

Step 10 Finishing ...................................................................... 31

Step 11 Installing Trim, Logs, and Ember Material.................... 31

Installing the Trim......................................................... 31

Positioning the Logs .................................................... 32

Placing the Ember Material.......................................... 34

Glass Specifications .................................................... 34

Step 12 Before Lighting the Fireplace ....................................... 35

Step 13 Lighting the Fireplace .................................................. 36

Afterthe Installation..................................................................... 36

Section 4: Maintaining and Servicing Your Fireplace......... 36

Î= Containsupdated information.

4Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

Partnumber list on followingpage.

6 Log Set Assembly

11 7

(NG, LP) Exploded Parts Diagram

Service Parts 6000BE, 6000BE-IPI

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

ITEM COMMON PARTS SERIAL # PART NUMBER

1 Surround 2026-108

2 Hood SRV60-143-BK

3 Glass Door Assembly GLA-750TR

4BurnerNG 381-376A

4BurnerLP 381-375A

5 Log Grate 060-361A

6 Log Set Assembly (Only sold as a set) LOGS-6000BE

7 Junction Box 4021-013

8 Louver, Bottom 394-114

9 Louver, Top 394-249

10 Mesh Assembly 530-382A

11 Insulation Board 385-401

12 Base Refractory 381-124

Vent Gasket 2025-114

Wire Assembly 571-514A

Touch Up Paint TUP-GBK-12

Glass Latch Assembly 386-122A

Flue Restrictor 385-128

ACCESSORIES

Conversion Kit NG NGK-6000BE

Conversion Kit LP LPK-6000BE

Conversion Kit IPILP LPK-6000BE-IPI

Brass Trim Kit PBK-6000BE

Service Parts List

IMPORTANT: THISIS DATEDINFORMATION.The most currentinformation is located onyour dealers VIPsite. When order-

ing, supply serial and model numbers to ensure correct service parts.

6000BE, 6000BE-IPI

Also see pages 6 and 7 for additional IPI and Standing Pilot service part numbers.

6Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

(NG, LP) Exploded Parts Diagram

Service Parts 6000BE-IPI

ITEM DESCRIPTION SERIAL # PART NUMBER

1 Valve Bracket 2025-101

2 Flex Ball Valve Assembly 302-320A

3PilotAssemblyNG 4021-025

3 Pilot Assembly LP 4021-026

4 ON/OFF Rocker Switch 060-521A

5ValveNG 750-500

5 Valve LP 750-501

6 Burner Orifice NG (#38C) 582-838

6 Burner Orifice LP (#52C) 582-852

7Module 593-592

8WireAssembly 593-590A

9 12" Flexible Gas Connector 383-302A

10 Ground Strap 2025-512

11 Pilot Bracket 530-164

Battery Pack 593-594A

3 Volt Transformer 593-593A

Gasket Assembly 385-402A

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

Intermittent Pilot Ignition

ValveAssembly

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

(NG, LP) Exploded Parts Diagram

Service Parts 6000BE

ITEM DESCRIPTION SERIAL # PART NUMBER

1 Burner Orifice (NG) (#38C 582-838

1 Burner Orifice (LP) (#52C) 582-852

2ValveNG 060-522

2 Valve LP 060-523

3 Flexible Gas Connector 383-302A

4PiezoIgnitor 291-513

5 Pilot Assembly NG 485-510A

5 Pilot Assembly LP 485-511A

6 Pilot Bracket 530-164

7 Flex Ball Valve Assembly 302-320A

8ValveBracket 2025-101

Wire Assembly 040-557A

Bracket Assembly 385-402A

Gasket Assembly 385-402A

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

Standing Pilot Ignition

ValveAssembly 6

8Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

Appliance Certification

The Hearth & Home Technologies fireplace models

discussed in this Installers Guide have been tested to

certification standards and listed by the applicable

laboratories.

Certification

MODELS: 6000BE,6000BE-IPI

LABORATORY: UnderwritersLaboratories

TYPE: Direct Vent Gas Fireplace Heater

STANDARD:ANSIZ21.88-2000•CSA2.33-M98•UL307B

Installation Codes

Thefireplaceinstallationmustconformtolocalcodes.Before

installing the fireplace, consult the local building code

agency to ensure that you are in compliance with all

applicable codes, including permits and inspections.

Intheabsence oflocal codes,the fireplaceinstallation must

conform to the National Fuel Gas Code ANSI Z223.1 (in

theUnitedStates)or theCAN/CGA-B149InstallationCodes

(in Canada). The appliance must be electrically grounded

in accordance with local codes or, in the absence of local

codes with the National Electric CodeANSI/NFPANo. 70

(intheUnitedStates),ortothe CSAC22.1CanadianElectric

Code(inCanada).

Thesemodels may be installedin a bedroom orbed-sitting

room in the U.S.A. and Canada.

1Approvals and

Codes

HighAltitude Installations

U.L. Listed gas appliances are tested and approved with-

outrequiring changes for elevations from 0 to 2,000feet in

the U. S.A. and in Canada.

Wheninstalling this appliance at an elevation above2,000

feet, it may be necessary to decrease the input rating by

changingthe existing burner orifice to a smallersize.Input

rate should be reduced by 4% for each 1000 feet above a

2000 foot elevation in the U.S.A. or 10% for elevations

between2000and 4500feet inCanada.If theheating value

of the gas has been reduced, these rules do not apply.To

identify the proper orifice size, check with the local gas

utility.

Ifinstalling this appliance at an elevation above 4,500 feet

(in Canada), check with local authorities.

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

2Getting Started

Introducing the Hearth & Home Technologies

Gas Fireplaces

Hearth& HomeTechnologiesdirect vent gasfireplaces are

designedto operate with all combustion air siphoned from

outside of the building and all exhaust gases expelled to

the outside.

The information contained in this Installers Guide, unless

noted otherwise, applies to all models and gas control

systems.Gasfireplace diagrams,includingthe dimensions,

are shown in this section.

Pre-install Preparation

Thisgasfireplace and its components are tested and safe

when installed in accordance with this Installers Guide.

Report to your dealer any parts damaged in shipment,

particularly the condition of the glass. Do not install any

unit with damaged, incomplete, or substitute parts.

The vent system components and trim doors are shipped

in separate packages. The gas logs may be packaged

separately and must be field installed.

Read all of the instructions before starting the

installation. Follow these instructions carefully during

the installation to ensure maximum safety and benefit.

Failure to follow these instructions will void the

owner’s warranty and may present a fire hazard.

The Hearth & Home Technologies Warranty will be voided

by, and Hearth & Home Technologies disclaims any

responsibilityfor, the following actions:

• Installationofanydamagedfireplace orventsystemcom-

ponent.

• Modification of the fireplace or direct vent system.

• Installation other than as instructed by Hearth & Home

Technologies.

• Improper positioning of the gas logs or the glass door.

• Installationand/or use of anycomponent part not manu-

facturedand approvedbyHearth &HomeTechnologies,

not withstanding any independent testing laboratory or

otherpartyapprovalofsuchcomponent partoraccessory.

ANY SUCH ACTION MAY POSSIBLY CAUSE A FIRE

HAZARD.

When planning a fireplace installation, it’s necessary to

determine:

•Where the unit is to be installed.

•Thevent system configuration to be used.

•Gas supply piping.

•Electricalwiring.

•Framingand finishing details.

•Whether optional accessories—devices such as a fan,

wallswitch,or remote control—are desired.

If the fireplace is to be installed on carpeting or tile, or on

any combustible material other than wood flooring, the

fireplaceshould be installed on a metal or wood panel that

extends the full width and depth of the fireplace.

10 Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

Figure 1. Diagram of the 6000BE, 6000BE-IPI

[1040mm]

[965mm]

36 1/8

[916mm]

25 1/4

[642mm]

34 5/8

[879mm]

[203mm]

VENT

COLLARS

ELECTRICAL

ACCESS

26 7/8

[682mm]

12 3/4

[323mm]

3 1/2

[90mm]

GAS LINE

ACCESS

2 1/8

[55mm]

6 7/8 [174mm]

14 1/4

[362mm]

8 [203mm]

VENT COLLARS

21 1/2 [548mm]

11 5/8 [297mm]

28 1/2 [724mm]

TOP VENT COLLARS

REAR VENT COLLARS

GAS

LINE

ACCESS ELECTRICAL

ACCESS

GAS

CONTROLS

RATING PLATE

AND LABELS

TRIM

DOOR

HOOD

TOP STANDOFFS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Chimenea de interior de Hearth and Home Technologies

Hearth and Home Technologies

Hearth and Home Technologies CFL-18NG-C Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies 36-EBU Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies BE-32 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies GO24MTCH Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies PVK-80 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies outdoor lifestyles Dakota 42-CE Instrucciones de montaje

Hearth and Home Technologies

Hearth and Home Technologies Simplifyre SFE-ST Instrucciones de instalación

Hearth and Home Technologies

Hearth and Home Technologies RBV4236IH Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies MEZZO Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies GO24-IPI-LP Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies 350TRSI-AUF Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies DV3732-B Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies Outdoor Lifestyles ODLANAIG-48 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies DV3732 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies BE-36-C Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies B36S-AU Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies Accelerator 4 14-1/8 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies outdoor lifestyle ODCTGWD-36 Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies 350TRSI-AUF Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies VERMONT CASTINGS MONTP-II-CB Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies Crescent II Door Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies Simplifyre SFE-35 Instrucciones de montaje

Hearth and Home Technologies

Hearth and Home Technologies DV3732SBIL Manual de usuario

Hearth and Home Technologies

Hearth and Home Technologies outdoor lifestyles LUM-OD-NM Instrucciones de funcionamiento

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación